• 공업화학
• /
• 제19권6호
• /
• pp.629-632
• /
• 2008

N-Arylation에 대한 경제적이고 실용적인 촉매시스템을 찾기 위하여 indole을 이용한 다양한 반응조건에서 실험이 수행되었으며, 결과적으로 본 연구에서 처음 시도한 copper nitrate와 copper cabonate가 다른 copper계 촉매나 palladium 촉매에 유사하거나 더 우수한 반응성을 보여주었다. Copper nitrate 촉매를 사용하는 경우에는 다양한 리간드 중에서 N,N'-dimethylethylenediamine 리간드가 더 효과적이었으며 copper cabonate 계에서는 ethylenediamine 리간드가 더 적합한 것으로 판명되었다.

• 문화기술의 융합
• /
• 제9권6호
• /
• pp.855-859
• /
• 2023

질산구리삼수화물염(copper(II) nitrate trihydrate) 수용액을 공업용 전분(starch)에 함침 시킨 전구체를 이용하여 산화구리(CuO) 나노 입자를 합성하였다. 주사전자현미경(SEM)을 통하여 질산구리삼수화물염 수용액이 함침된 전구체에 대한 구조를 분석하였고, 전구체에 대한 열처리 온도를 증가 시킴에 따라 생성되는 산화구리 입자의 입자 크기와 결정 구조를 X선회절분석법(XRD)과 주사전자현미경(SEM)으로 분석하였다. 분석 결과에 따르면, 전구체에서 유기물질이 완전히 열분해 되어지는 온도는 450-490℃이며, 열처리하는 온도가 증가함에 따라 생성되는 산화구리 입자의 크기와 결정성이 증가하는 것을 확인할 수 있었고, 또한 500-800℃에서 1시간씩 열처리하여 얻은 산화구리 입자의 크기는 100nm-2㎛인 것으로 나타났다. 하소 온도 400℃에서 산화구리 결정상이 형성되고, 800℃까지는 산화구리 단일상만 존재하며, 하소 온도의 증가에 따라 생성되는 입자의 크기가 커지는 것을 확인하였다.

• 한국표면공학회지
• /
• 제47권1호
• /
• pp.1-6
• /
• 2014

The copper deposit on steel plate was prepared by pyrophosphate copper plating solution made with variation of inorganic additive. $NH_4OH$ and $NH_4NO_3$ were used as inorganic additives. The copper layer characteristics - tensile strength, crystallite size and crystal orientation - were evaluated by X-ray diffraction and Universal Test Machine. The presence of ammonium nitrate results in reduction of average roughness value from $0.08{\mu}m$ to $0.03{\mu}m$. In pyrophosphate copper plating solution without Inorganic additive, tensile strength of electrodeposit copper foil was reduced from 600 MPa to 180 MPa after 7 days aging. However, when adding ammonium nitrate, there was almost no change of tensile strength, intensity of crystal orientation - (111), (200) and (220) - and crystallite size (2~30 nm).

• KSBB Journal
• /
• 제13권4호
• /
• pp.391-398
• /
• 1998

The effect of culture medium copper availability on the specific growth rate(${\mu}$) and carbon conversion efficiency (CCE) was sutided for an obligatory methanotroph Methylosinus trichosporium OB3b under various combinations of carbon and nitrogen sources. Methane or methanol was used as a carbon source, and nitrate or ammonium was used as a nitrogen source. Medium copper availability determined the intracellular location or kind of methane monooxygenase (MMO), cell-membrane (particulate or pMMO) when copper was present and cytoplasm (soluble or sMMO) when copper was deficient. When methane was used as a carbon source, copper-containing medium exhibited higher ${\mu}$ and CCE than copper-free medium regardless of the kind of nitrogen source. When methanol was used as a carbon source, however, the effect of copper disappeared. Ammonium gave the higher ${\mu}$ and CCE than nitrate for both methane and methanol. Those observation suggest that there exist an important difference in energy utilization efficiency for methane assimilation between sMMO and pMMO.

• 한국토양비료학회지
• /
• 제39권4호
• /
• pp.204-208
• /
• 2006

이연구의 목적은 연속흐름제어장치를 통한 식물체의 nitrate 분석방법 및 RQflex 방법 및 salicylic acid 방법과 비교를 통해 그 정확성을 확인하고자 함에 있다. 분석은 메론, 수박, 오이, 그리고 토마토 잎을 현장에서 채취 후, 분석시까지 초저온 냉동고에 보관후 분석하였다. RQflex로 측정한 결과가 CFA방법이나 salicylic acd 방법보다 약간 높게 나왔으며, CFA방법과 salicylic acid 방법과의 상관관계는 $R^2=0.9671$을 보였으며, RQflex와의 상관관계는 $R^2=0.9739$를 보였다.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.167-168
• /
• 2006

A hyrdrothermal synthesis has been developd to prepare rod-like crystals of copper oxide using copper nitrate trihydrate as a function of synthesis temperature, stirring speed and solution pH value. The properties of the fabricated crystals were studied using scanning electron microscopy, X-ray diffraction and particle size analysis. The morphology of the synthesized CuO was dependent on both the pH value of the solution and the morphology of the seed materials. Synthesized particles have regular morphologies and a uniform size distribution.

• 자원리싸이클링
• /
• 제25권3호
• /
• pp.11-19
• /
• 2016

국내 전자산업에서 발생하는 실리콘 슬러지와 폐질산구리용액을 동시에 순환활용하기 위한 기초연구가 수행되었다. 폐질산구리 용액을 이용하여 실리콘 슬러지로부터 주요성분인 구리, 칼슘, 철을 비롯한 금속성분을 회수하거나 제거하기 위한 침출실험을 행하였다. 침출온도, 침출시간, 광액농도 등이 금속성분의 침출에 미치는 영향을 조사하였다. 그리고 철의 제거효율을 향상시키기 위하여 염산(HCl), 질산($HNO_3$), 과산화수소수($H_2O_2$)를 첨가하여 침출실험을 수행하였다. 실리콘 슬러지로부터 구리의 침출과 철의 제거 효과를 고려하여 최적 침출조건은 광액농도 200 ~ 225 g/L, 반응온도 $90^{\circ}C$, 반응시간 30분으로 설정하였으며 이 때 슬러지의 주요 성분인 구리의 침출율은 98.27 ~ 99.17% 이었으며 실리콘 슬러지에서 실리콘의 순도는 98.69 ~ 98.86% 이었다. 이상의 연구결과로 부터 실리콘 슬러지에 함유되어 있던 구리성분을 폐질산구리용액으로 침출하고 뒤이은 분리정제 공정에서 부가가치가 높은 고순도 금속구리 또는 구리화합물로 회수하는 것이 가능함을 확인하였다.

• Restorative Dentistry and Endodontics
• /
• 제18권2호
• /
• pp.469-481
• /
• 1993

The purpose of this study was to achieve the reduction of the galvanic current between the dental amalgam alloy and gold alloy. In order to measure the galvanic current between these two metals a prep in the size of $4{\times}13mm$ which was filled with amalgam and another prep of $4{\times}2mm$ was filled with gold alloy was made in the acrylic resin. These two preps were then connected to a 2mm diameter copper wire. Using an ammeter to measure the galvanic current, six different kinds of amalgam and gold alloy were immersed in saline solution with approximately 10mm distance between the two alloys. Chemical agents that are thought to reduce the galvanic current such as hydrazine. silver nitrate, potassium chromate, and bonding agents such as Scotch bond 2(3M) and All bond 2(Bisco) were applied to the alloy surface. Cathodic inhibitor such as hydrazine was applied to gold alloy where as anodic inhibitor such as silver nitrate and potassium chromate were applied to amalgam. Both bonding agents, Scotch bond 2(3M) and All bond 2 (Bisco), were applied to amalgam. The following results were obtained when the currency on the coated alloy surface was compared to the uncoated surface. 1. The galvanic currency went down as the time elapsed and after 30 minutes no change was detected. 2. Initial currency was higher in low copper amalgam compared to high copper amalgam. Intitial currency was the highest in low copper lathe-cut amalgam. 3. Group of gold coated with hydrazine had the most reduction in galvanic currency. 4. Group of amalgam coated with silver nitrate or potassium chromate also showed significant reduction in galvanic currency. 5. The bonding agents also helped reduce galvanic currency. 6. Of all the agents used to reduce galvanic currency, silver nitrate showed the best result.

• Journal of Microbiology and Biotechnology
• /
• 제12권5호
• /
• pp.849-853
• /
• 2002

Metal ions have an adverse effect on anaerobic digestion. In an acetate degradation test of upflow of anaerobic sludge blanket granules with $Cu^{2+}$, not all of the acetate that disappeared was stoichiometrically converted to methane. In the presence of 400 mg/g-VSS (volatile suspended solids) $Cu^{2+}$, only 26% of the acetate consumed was converted to methane. To study acetate conversion by other anaerobic microorganisms, sulfate and nitrate reductions were investigated in the presence of $Cu^{2+}$ Sulfate and nitrate reductions exhibited more resistance to $Cu^{2+}$than methanogenesis, and the granules reduced 2.2 mM and 5.4 mM of nitrate and sulfate, respectively, in the presence of 400 mg/g-VSS copper ion. However, the acetate degraded by sulfate and nitrate reductions was only 24% of the missing acetate that could have been stoichiometrically converted to $CO_2$. Accordingly, 76% of the acetate consumed appeared to have been converted to other unknown compounds.

• Bulletin of the Korean Chemical Society
• /
• 제27권10호
• /
• pp.1587-1592
• /
• 2006

We report the preparation, structure and magnetic properties of a new pillared complex, copper(II) hydroxy-1,4-butanedisulfonate, $Cu_2(OH)_3(O_3SC_4H_8SO_3)_{1/2}$. The titled compound was obtained by anion exchange, using copper hydroxyl nitrate $(Cu_2(OH)_3NO_3)$ as the starting material. According to the XRD data, this compound exhibits a pillared layered structure with organic layers tilted between the copper hydroxide layers with a tilt angle of $21.8^{\circ}$. FTIR spectroscopy confirms total exchange of nitrate by the sulfonate and indicates that the sulfonate functions are linked to the copper(II) ions with each aliphatic chain bridging the adjacent hydroxide layers. According to the dc and ac magnetic measurements, the title compound is a metamagnet consisting of spin-canted antiferromagnetic layers, with a Neel temperature of 11.8 K.