• Bulletin of the Korean Chemical Society
• /
• 제33권12호
• /
• pp.4003-4006
• /
• 2012

A novel copper nanoparticles were synthesized from cupric sulfate using hydrazine as reducing reagents. A series of aromatic nitro compounds were reacted with sodium borohydride in the presence of the copper nanoparticles catalysts to afford the aromatic amino compounds in high yields. Additionally, the catalysts system can be recycled and maintain a high catalytic effect in the reduction of aromatic nitro compounds.

• Bulletin of the Korean Chemical Society
• /
• 제27권7호
• /
• pp.1079-1082
• /
• 2006

• 한국안전학회지
• /
• 제28권2호
• /
• pp.37-41
• /
• 2013

In this work, we report the effect on the volatole organic compounds(VOCs) sensing properties of Copper phthalocyanine(CoPc) and Dilithium phthalocyanine(DiLiPc) thin films onto alumina substrates. Use evaporation method and the spin-coated method for sensing device. The materials of metallophthalocyanine macrocyclic compound solutions blended with N,N'-diphenyl-N,N'-bis(1-naphthyl)-1,1'-biphenyl-4,4"-diamine and/or Poly[2-methoxy-5-(2'-ethylhexyloxy)-1,4-phenylenevinylene] solutions. The influence of the blended in with metallophthalocyanine macrocyclic compounds on the resistance have been measured and analyzed in five different volatole organic compounds. The following results were obtained: The AFM 3D image of thin films deposited on metallophthalocyanine macrocyclic compound shows that the surfaces roughness were about CuPc 4.1~14.3 nm(7.5~8.1%), DiLiPc 10.3~22.2 nm(7.9~11.5%). The resistances decreases upon increasing the concentration of vapor organic compounds to CuPc and DiLiPc thin films. That thin films blended Copper phthalocyanine(CoPc) and Dilithium phthalocyanine(DiLiPc) with N,N'-diphenyl-N,N'-bis(1-naphthyl)-1,1'-biphenyl-4,4"-diamine and/or Poly[2-methoxy--5-(2'-ethylhexyloxy)-1,4-phenylenevinylene]. The resistances of blended thin films with N,N'-diphenyl-N,N'-bis(1-naphthyl)-1,1'-biphenyl-4,4"-diamine and/or Poly[2-methoxy--5-(2'-ethylhexyloxy)-1,4-phenylenevinylene] decreases upon increasing the concentration of volatole organic compounds(VOCs) on DiLiPc than CuPc compound thin films.

• Bulletin of the Korean Chemical Society
• /
• 제34권8호
• /
• pp.2256-2260
• /
• 2013

A new quinoline-based acylhydrazone (1) has been synthesized and applied as a fluorescent probe. Probe 1 exhibits high selectivity and sensitivity to $Cu^{2+}$ with fluorescence "ON-OFF" behavior in HEPES buffered (1‰ DMSO, HEPES 20 mM, pH = 7.4) solution. The on-site generated 1-$Cu^{2+}$ complex displays excellent selectivity to sulfide ions with fluorescence "OFF-ON" performance through copper displacement approach.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 연구회
• /
• pp.88-91
• /
• 2001

The mechanical properties and surface luminous intensities of copper foil have been studied with variation of the amount of additives into the electrolyte. Especially, organic compound of HEC was added from 0.1 to 10ppm for the propose of increasing the mechanical property and the surface state. The total thickness of electrodeposited copper foil was decreased with increasing the amount of organic compounds. There was not so much significant effect of the current density. It has been observed that mechanical property and surface luminous intensity increase with increasing concentration of organic compounds.

• 약학회지
• /
• 제13권1호
• /
• pp.1-15
• /
• 1969

A new method of qualitative and quantitative determination of barbiturates in the pharmaceuticals by means of $\alpha$-picoline-copper (II) was studied. Barbiturates in the pharmaceuticals were dissolved in the mixed solvent of 33% $\alpha$-picoline-Carbontetrachloride to yield Complex Compounds of barbiturates-copper (II)-$\alpha$-picoline. Complex Compounds of barbiturates show uniformly maximum absorption at the wavelength of 540m.mu. and wre to be identified at the concentration of 1 X 10$^{-4}$ Mole, and also was to be quantitatively determined at the concentration of 1 X 10$^{-3}$ Mole. By this method barbiturates in the pharmaceuticals could be determined in the presence of various compounds such as sulpyrine, isopropylantipyrine, antipyrine, phenacetin and etc. But Barbiturates could be also determined by this method after seperation with aminopyrine, acetaminophen, acetylsalicylic acid and etc. by column chromatography. And barbiturates and acetylsalicylic acid could be also determined by simultaneous equation while their complex compounds show uniformly each maximum absorption at the Wavelength of 540 m${\mu}$ and 620 m${\mu}$. I.R. spectra of these complex compounds show identification of Barbiturates derivatives. The composition ratio of these complex compounds were : barbiturates : Cu : ${\alpha}$-picoline=2:1:2.

• Mycobiology
• /
• 제34권4호
• /
• pp.214-218
• /
• 2006

Four copper(II) complexes have been prepared using macrocyclic ligands. The macrocyclic ligands have been synthesized by the condensation reaction of diethyl phthalate with Schiff bases derived from o-phenylene diamine and Knoevenagel condensed ${\beta}-ketoanilides$ (obtained by the condensation of acetoacetanilide and substituted benzaldehydes). The ligands and copper complexes have been characterized on the basis of Microanalytical, Mass, UV-Vis., IR and CV spectral studies, as well as conductivity data. On the basis of spectral studies, a square-planar geometry for the copper complexes has been proposed. The in vitro antifungal activities of the compounds were tested against fungi such as Aspergillus niger, Rhizopus stolonifer, Aspergillus flavus, Rhizoctonia bataicola and Candida albicans. All the synthesized copper complexes showed stronger antifungal activities than free ligands. The minimum inhibitory concentrations (MIC) of the copper complexes were found in the range of $8{\sim}28\;{\mu}g/ml$. These compounds represent a novel class of metal-based antifungal agents which provide opportunities for a large number of synthetic variations for modulation of the activities.

• Journal of the Korean Wood Science and Technology
• /
• 제38권5호
• /
• pp.450-456
• /
• 2010

This research was performed to develop the simple techniques to predict the copper concentration in alkaline copper quat (ACQ), copper azole (CUAZ), and bis-(N-cyclohexyl-diazeniumdioxy)-copper (CB-HDO) solutions. Two simple methods measuring the color due to copper compounds were evaluated by using a spectrophotometer. One is to directly measure the color of the preservative solutions. The other is to measure the color developed on the surface of a treated sample with the preservatives. The $L^*$ of the measured color values appeared to be the most sensitive to the change of copper concentration. The $a^*$ values of the preservative solutions tended to be decreased at above a certain concentration condition, and the $b^*$ values showed no trend with the concentration of copper compounds in preservative solutions. The surface color of the treated samples were changed from bluish to greenish as time passed. Both methods showed the high $R^2$ values of the regression models determined by using the lightness, which suggested that the methods might be applicable in preservative-treatment mills for the easy and fast prediction of the copper concentration.

• Bulletin of the Korean Chemical Society
• /
• 제31권3호
• /
• pp.551-552
• /
• 2010

• 대한화학회지
• /
• 제16권3호
• /
• pp.166-177
• /
• 1972

This paper reports the reaction of monoiodoperfluorocycloakense with alkyl lithium and activated copper repectively resulting in various coupling products. Of particular interests are compounds of the following composition. The physical properties of the various compounds are given along with a discussion relating to the mechanistic pathways involved in the coupling reactions.