• Journal of the Mineralogical Society of Korea
• /
• v.17 no.1
• /
• pp.1-9
• /
• 2004

Copper(II) sorbed on kaolinite (KGa-lb) was studied using electron paramagnetic resonance (EPR) and extended X-ray absorption fine structure (EXAFS) spectroscopy. The sorbed copper(II) had an isotropic EPR signal with $g_{iso}\;=\;2.19$ at room temperature. At 77 K, the isotropic signal converted to an axially symmetric anisotropic signal with $g_{\$\mid$}\;=\;2.40,\;g_{\bot}\;=\;2.08,\;and\;A_{\$\mid$}\;=\;131\;G$. These EPR results suggest that the sorbed copper(II) forms an outer-sphere surface complex with a tetragonally distorted $CuO_{6}$ octahedral structure on the kaolinite. In the sorption measurement, the amount of sorbed copper increased with increasing pH of the solution. However, the intensity of the isotropic EPR line was not directly proportional to the amount of sorbed copper. This discrepancy was resolved by assuming the formation of a surface precipitate at higher pH that is invisible by EPR. The EXAFS data confirmed the existence of the surface precipitate. The best fit for the EXAFS of the sorbed copper showed that each copper on the kaolinite had 6.8 copper neighbors located $3.08\;{\AA}$ from it, in addition to the first shell oxygen neighbors, including 4 equatorial O at $1.96\;{\AA}$ and 2 axial O at $2.31\;{\AA}$. This work shows that the local environment of the copper sorbed on the kaolinite changes as a function of pH and surface loading, and that the EPR and EXAFS are useful in studying such changes.

• Journal of Microbiology
• /
• v.34 no.2
• /
• pp.172-178
• /
• 1996

Methylobacillus sp. strain SK1, which grows only on methanol, was found to grow in the absence of added copper. The doubling time (t$_{d}$ = 1.3 h) of the bacterium growing at the exponential growth phase at 30.deg.C in the absence of copper was the same as that of the cell growing in the presence of copper. The bacterium growing after the exponential phase in the absence of copper, however, grew faster than the cell growing in the presence of copper. Cells harvested after thee arly stationary phase in the presence of copper were found to exhibit no methanol dehydrogenase (MDH) activity, but the amount and subunit structure of the enzyme in the cells were almost the same as that in cells harboring active MDH. Pellets of the cells harvested after the early stationary phase in the presence of copper were pale green. Cell-free extracts prepared from cells harvested at the early stationary phase in the presence of copper were pink and exhibited MDH activity, but it turned dark-green rapidly from the surface under air. The green-colored portions of the extracts showed no MDH activity and contained c-type cytochromes that were oxidized completely. The inactive MDH activity and contained c-type cytochromes that were oxidized completely. The inactive MDH proteins in the green portions were found to have antigenic sites identical to those of the active one as the inactive MDHs in cells grown in the presence of copper. The bacterium was found to accumulate copper actively during the exponential growth phase. MDH prepared from cells grown in the presence or absence of copper was found to be more stable under nitrogen gas than under air. Methanol at 10 mM was found to enhance the stability of the MDH under air.r.

• Resources Recycling
• /
• v.16 no.3 s.77
• /
• pp.27-33
• /
• 2007

It is very important in the view point of resource recycling to recover valuable metals such as copper and tin from waste electric and electronic scrap. The waste electric and electronic scrap contains significant amounts of copper, tin, and so on. In this study, a new process for extracting copper and tin contained in the waste electric and electronic scrap using waste copper slag which is generated from the melting furnace of copper smelter was presented. Advantage of the proposed process is to reuse waste copper slag instead of new fluxes as slag formatives. In each experiment, the waste electric and electronic scrap and waste copper slag were melted inputting suitable amount of CaO as an additional flux. Up to 95% of copper and 85% of tin in the raw material were extracted in a Cu-Fe-Sn alloy phase.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.26 no.3
• /
• pp.101-108
• /
• 2016

Each year, more than seven hundred thousand tons of copper slag are generated in Korea as a byproduct during the production of copper. Due to the large amount of copper slag produced, there has been increased interest in the use of copper slag as a construction material. To evaluate the potential of copper slag as a construction material, laboratory evaluations were conducted in this study, and three particle shapes and replacement rates of river sand were selected as experimental variables. Strength, air-void characteristics, and sulfuric acid resistance were the three properties evaluated to assess whether copper slag can be used as a construction material. Test results indicate that the gradation of copper slag has an effect on strength, and the maximum strength was achieved when 60 % of river sand was replaced with copper slag. In addition, when compared with ordinary Portland cement mortar, replacing river sand with copper slag reduced air void size and increased sulfuric acid resistance.

• The Korean Journal of Pesticide Science
• /
• v.6 no.3
• /
• pp.175-182
• /
• 2002

This experiment was conducted to investigate the effects of acid rain in spraying copper hydroxide 77% wettable power(WP) on leaf surface morphology and crop injury of the garlic(Allium sativum L.). Leaf chlorosis, hooked leaves, wrinkled epidermal cells and increased stomata open of garlic were induced by foliar application of simulated acid rain(SAR). It was become to be severe in application of copper hydroxide solution after application of SAR, but those yield of garlic was not significantly different from the untreated control. Leaf chlorosis was sharply increased above 100 ppm of copper ions. Amount of solved copper ions in copper hydroxide solution was remarkably increased below pH 5.5 and the residue in garlic leaves was significantly increased by application of copper hydroxide solution after spraying SAR compared with application of copper hydroxide solution only. When calcium carbonate was applied together with copper hydroxide leaf chlorosis was less than copper hydroxide only.

• Journal of the Mineralogical Society of Korea
• /
• v.17 no.3
• /
• pp.209-220
• /
• 2004

Adsorption behavior of Cu onto Hwangto, from Pankok-ri, Kosung-gun, suspension was studied using Cu batch adsorftion experiment and computer program MINTEQA2 and FITEQL 3.2. The sorption of copper was investigated as a function of pH, copper concentration and $NaNO_3$ background concentration (0.01 and 0.1 M). The concentration of copper was analyzed using ICP-AES. The sorption of copper onto Hwangto suspension increased with increasing pH and copper concentration. The adsorption percentage of copper drastically increased from pH 5.5 to 6.5, and reached nearly 100% at pH 7.5. Because the amount of copper solution and the ionic strength of background electrolyte may not affect the sorption of copper onto Hwangto, the copper ion may be combined at the surface of Hwangto as an inner-sphere complex. Using the MINTEQA2 program, the speciation of copper was calculated as a function of pH and copper concentration. The concentration of $Cu^{2+}$ decreased and that of $Cu(OH)_2$ increased with increasing pH. The uptake of copper in the Hwangto suspension was simulated by FITEQL3.2 program using two sites-three pKas model, which is composed of silicate reaction site and Fe oxide reaction site. The copper absorption reaction constants were calculated in the case of 2～6 mL of copper solution. The Fe oxide reaction site rapidly adsorbs copper ion between pH 4.5～6.5. Silicate reaction site adsorbs little copper ion at low copper concentration but much at high copper concentration. The removal amount of copper by precipitation was negligible in comparison with that of adsorption. The Fe oxide reaction site may has higher adsorption affinity of copper ion than silicate reaction site.

• Resources Recycling
• /
• v.17 no.5
• /
• pp.60-65
• /
• 2008

A study on the removal of silver(Ag) in copper electrolyte was carried out to produce high purity copper by using various method such as ion exchange resin, activated carbon adsorption, copper cementation with powder and wire, CuS precipitation. Parameters, such as reaction time, reaction temperature, addition amount etc. were investigated to determine the effective condition of silver removal. CuS precipitation and ion exchange using Lewatit TP214 was found to be effective. Especially, silver content in copper electrolyte was reduced from 10 ppm to less than 0.1 ppm by ion exchange with Lewatit TP214.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.05a
• /
• pp.319-324
• /
• 2001

Recently new practical use way of industry product is required. In this study, to find flowing property of slump, unit weight, the air amount, compressive strength etc. Compressive strength 240, 270kgf/$cm^{2}$, slump 8$\pm$2.5(I), 152$\pm$.5(II)cm, mixing ratio of copper smelting slag decided by 0, 25, 50, 75, 100% gradually, The result of this study was follows ; 1. Unit weight increased 2.2%~4.4% according as mixing ratio of copper smelting slag increases. 2. Slump increased about 2~5% as the mixing ratio increased gradually 3. Compressive strength was increased about 4~28% in copper smelting slag mixing ratio 25~50% and 8~20% decreased more than mixing ratio 75%.

• Journal of Environmental Health Sciences
• /
• v.30 no.2
• /
• pp.115-122
• /
• 2004

A glassy carbon electrode(GCE) modified with nafion-DTPA (diethylene triamine-pentaacetic acid)-glycerol is used for the highly selective and sensitive determination of a trace amount of Cu(II). Various experimental parameters, which influenced the response of nafion-DTPA-glycerol modified electrode to Cu(II), are optimized. The Copper(II) is accumulated on the electrode surface by the formation of the complex in an open circuit, and the resulting surface is characterized by medium exchange, electrochemical reduction, and differential pulse voltammetry(DPV). The electrochemical response is evaluated with respect to concentration of modifier, pH and preconcentration time, quiet time, copper(II) concentration, and other variables. A linear range is obtained in the concentration range 1.0${\times}$10$^{-8}$ M-1.0${\times}$10$^{-6}$ MCu(II) with 7 min preconcentration time. The detection limit(3s) is as low as 2.36${\times}$10$^{-8}$ M (1.50 ppb).

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.1
• /
• pp.43-51
• /
• 2011

Natural convection heat transfer phenomena on a horizontal cylinder have been studied experimentally in order to investigate the applicability of analogy experimental methodology using a copper electroplating system and to visualize the local heat transfer rates depending on the angular position and the diameter of the horizontal cylinder. In the copper electroplating system, the copper ion produced at the anode moves by convection and diffusion to the cathode and reduces at the cathode, representing the heat transfer. By using aluminum cathode with a distinguishable color, the amount of copper plated could visualize the amount of heat transferred depending on the angular position of the cylinder. The diameter of the cylinder is varied from 0.01m to 0.15m, which correspond to Rayleigh numbers in the range of $1.73{\times}10^7$ to $5.69{\times}10^{11}$. The test results are in good agreement with existing heat transfer correlations.