• 한국전기전자재료학회논문지
• /
• 제19권6호
• /
• pp.568-573
• /
• 2006

We have synthesized new blue light emitting random copolymers, poly(9,9'-n-dioctylfluorene-co-perfluorobenzene-1,4-diyl)s (PFFBs), via Ni(0)-mediated coupling reactions. The weight-average molecular weights ($M_w$) of the PFFB copolymers ranged from 9,000 to 15,000. The PFFB copolymers dissolved in common organic solvents such as THF and toluene. The PL emission peaks of the PFFB copolymers were at around 420, 440, and 470 nm. EL devices were fabricated in ITO/PEDOT/polymer/Ca/Al configurations using these polymers. These EL devices were found to exhibit pure blue emission with approximate CIE coordinates of (0.15, 0.11) at $100cd/m^2$. The blue emissions of these devices might be due to the restriction of the polymer chains to aggregation by introducing of the highly electronegative fluorine moieties. The maximum brightnesses of the PFFB copolymer devices ranged from 140 to $3600cd/m^2$ with maximum efficiencies from 0.2 to 0.6 cd/A. The enhanced efficiency of the PFFB (8/2) copolymer device results from the inhibition of excimer formation by the introduction of the electronegative fluorine moieties into the copolymers.

• Fibers and Polymers
• /
• 제5권4호
• /
• pp.289-296
• /
• 2004

The kinetic parameters, including the activation energy E, the reaction order n, and the pre-exponential factor Z, of the degradation of the copolymers based on the poly(L-lactide) (PLLA) or poly(p-dioxanone-co-L-lactide) (PDO/PLLA) and diol-terminated poly(ethylene glycol) (PEG) segments have been evaluated by the single heating methods of Friedman and Freeman-Carroll. The experimental results showed that copolymers exhibited two degradation steps under nitrogen that can be ascribed to PLLA or PDO/PLLA and PEG segments, respectively. However, copolymers exhibited almost single degradation step in air. Although the values of initial decomposition temperature were scattered, copolymers showed the lower maximum weight loss rate and degradation-activation energy in air than in nitrogen whereas the higher value of temperature at the maximum rate of weight loss was observed in air.

• Carbon letters
• /
• 제15권4호
• /
• pp.290-294
• /
• 2014

New precursors, poly(acrylonitrile-co-crotonic acid) (poly(AN-CA)) and poly(acrylonitrile-co-itaconic acid-co-crotonic acid) (poly(AN-IA-CA)) copolymers, for the preparation of carbon fibers, were explored in this study. The effects of comonomers with acidic groups, such as crotonic acid (CA) and/or itaconic acid (IA), on the stabilization of nanofibrous polyacrylonitrile (PAN) copolymers were studied. The extent of stabilization, evaluated by Fourier transform infrared spectroscopy, revealed that the CA comonomer could retard/control the stabilization rate of PAN, in contrast to the IA comonomer, which accelerated the stabilization process. Moreover, the synthesized PAN copolymers containing CA possessed higher Mv than those of the IA copolymers and also showed outstanding dimension stability of nanofibers during the stabilization, which may be a useful property for improving the dimensional stability of polymer composites during manufacturing.

• Macromolecular Research
• /
• 제16권2호
• /
• pp.169-177
• /
• 2008

This paper reports a facile synthesis of new water-soluble poly(ethylene oxide) (PEO)-based amphiphilic block copolymers showing pH sensitive phase transition behaviors. The copolymers were prepared by atom transfer radical polymerization (ATRP) of methacrylamide type of monomers carrying a sulfonamide group using a PEO-based macroinitiator and a Cu(I)Br/$Me_6TREN$ catalytic system in aqueous media. The resulting polymers were characterized by a combination of $^1H$-NMR, size exclusion chromatography, and UV/Visible spectrophotometeric analysis. The micellization of the block copolymers as a drug-loading mechanism in aqueous media using fluorescein salt was examined as a function of pH. The stable micelle formation and its loading efficacy suggest that the block copolymers can be used as precursors for drug-nanocontainers.

• Bulletin of the Korean Chemical Society
• /
• 제19권9호
• /
• pp.962-967
• /
• 1998

Block copolymers consisting of poly(rbenzyl L-glutamate) (PBLG) as the hydrophobic part and poly(ethylene oxide) (PEO) as the hydrophilic part were synthesized and characterized. Polymeric micelles of the block copolymers (abbreviated GEG) were prepared by a dialysis method. The GEG block copolymers were associated in water to form polymeric micelles, and the critical micelle concentration (CMC) values of the block copolymers decreased with increasing PBLG chain length in the block copolymers. Transmission electron microscopy (TEM) observations revealed polymeric micelles of spherical shapes. From dynamic light scattering (DLS) study, sizes of polymeric micelles of GEG-1, GEG-2, and GEG-3 copolymer were 106.5±59.2 nm, 79.4±46.0 nm, and 37.9±13.3 nm, respectively. The drug loading contents of GEG-1, GEG-2 and GEG-3 polymeric micelles were 12.6, 11.9, and 11.0 wt %, respectively. These results indicated that the drugloading contents were dependent on PBLG chain length in the copolymer; the longer the PBLG chain length, the more the drug-loading contents. Release of norfloxacin (NFX) from the nanoparticles was slower in higher loading contents of NFX than in lower loading contents due to the hydrophobic interaction between PBLG core and NFX.

• Elastomers and Composites
• /
• 제54권1호
• /
• pp.61-69
• /
• 2019

Poly(ethylene-co-vinyl acetate) (EVA) is a copolymer of ethylene and vinyl acetate (VA). It is important to determine the VA content of EVA, since the properties of EVA depend highly on the VA content. EVA copolymers have been used in a wide range of applications appropriate for the different VA contents. IR, NMR, and TGA are generally used for determination of the VA content of EVA copolymers. Of these, TGA is the most reliable method and can be applied to cured EVAs. Analytical methods for determination of the VA content and properties of EVA copolymers via TGA were herein reviewed. Thermal behaviors of EVA copolymers (glass transition temperature ($T_g$), melting point ($T_m$), and crystallization temperature ($T_c$)) determined by DSC were also reviewed. Analysis of the related literature revealed that the $T_g$, $T_m$, and $T_c$ decrease by about 0.46, 1.36, and $2.08^{\circ}C$, respectively, for every 1 wt% in VA content. A method for determining the degree of crosslinking of cured EVA copolymers was also reviewed, and the degree of crosslinking tends to increase with the decrease in the VA content.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.200-200
• /
• 2006

Several polynorbornene or poly(norbornene-7-oxide) based functional block copolymers were synthesized by ring opening metathesis polymerization (ROMP) with good molecular weight and polydispersity control. Some representative functional groups in these polymers are a nitrobenzoyl group or ferrocene. These polymers were subjected to various chemical modification reactions to give other block copolymers that contain novel functionality such as amine, diazonium salt, and diazo groups. The resulting polymers were characterized by various techniques such as GPC, NMR, UV-VIS, AFM, and cyclovotammography (CV).

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1998년도 가을 학술발표회논문집
• /
• pp.199-202
• /
• 1998

Random copolymers are widely used as materials since they afford a convenient possibility of adjusting properties through the compositions of the copolymers. In the case of semicrystalline polymers, the degree of crystallinity generally decreases as the content of the minor component increases, leading often to fully amorphous materials even at low concentrations of the comonomer. (omitted)

• Bulletin of the Korean Chemical Society
• /
• 제24권4호
• /
• pp.441-445
• /
• 2003

We synthesized three copolymers bearing photochromic spiropyran dye and chalcone moiety in the side chain for studying the dynamic properties of their photochromism. They contain methacrylate-spiropyran (MAspiropyran) and methacrylate-chalcone (MA-chalcone) with the different concentration. The photosensitivity of the newly synthesized copolymers was investigated by using UV-Vis absorption spectroscopy. We observed photodimerization and photochromic behavior under UV irradiation at the same time. The effect of photocrosslink on the rate and stability of photochromism in three copolymers was considered in this study. This study might be helpful to design photochromic materials for irreversible optical memory by virtue of photocrosslinking reaction.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.95-96
• /
• 2006

Surface modification of clay minerals has become increasingly important for improving the practical applications of clays such as polymeric nanocomposites. We used the copolymer as modifiers having phenyl components, and successfully developed a route for the preparation of amine functionalized polymer based on oligostyrene and its block copolymers. The oligo(St-co-VBC)s with controlled molecular weight were synthesized via nitroxide mediated polymerization method. We also successfully prepared organophilic layered silicates whose surface is covered with styrenic copolymers. Through the analysis of chemical structure and morphology, we concluded that copolymers were very effective organic modifiers to change the surface characteristics of layered silicates.