• 한국전기전자재료학회논문지
• /
• 제21권10호
• /
• pp.881-884
• /
• 2008

In this study, polyvinylidene fluoride-trifluoroethylene (PVDF-TrFE) in the composition from 51/49, was deposited on platinum for a metal-ferroelectric-metal structure. From XRD patterns, the 70 nm- and 140 nm-thick PVDF-TrFE films showed the intensity peak of near $20^{\circ}$ connected to a ferroelectric phase. Moreover, the thicker film indicated the higher intensity than thinner one. The difference of the remanent polarization (2Pr) at 0 V is decreased gradually from 10.19 to $5.7{\mu}C/cm^2$ as the thickness decrease from 140 to 70 nm. However, when the thickness decreased to 50 nm, the 2Pr rapidly drop to $1.6{\mu}C/cm^2$ so the minimum critical thickness might be at least 70 nm for device. Both different thickness films, 70 and 140 nm, indicated that the characteristic of current density-voltage was measured for $10^{-6}{\sim}10^{-7}A/cm^2$ below 15 V and the thicker film maintained relatively lower current density than thinner one. From these results, we can expect that the electrical properties for the devices particularly ferroelectric thin film transistor using PVDF-TrFE copolymer were able to be on the trade-off relationship between the remanent polarization with the bias voltage and the leakage current.

• 폴리머
• /
• 제35권5호
• /
• pp.375-377
• /
• 2011

두 단계 스핀 코팅 방법을 사용하여 세라믹 체적 분율 0.10과 0.13의 $PbTiO_3$/P(VDF/TrFE) 0~3형 복합재료를 제작하고 분석하였다. 0~3형 $PbTiO_3$/P(VDF/TrFE) 복합재료를 SEM 전자현미경 사진으로 성공적으로 확인할 수 있었다. 이러한 전자현미경 사진을 통하여 복합재료의 0~3형 구조를 재확인하였다. 0~3형 $PbTiO_3$/P(VDF/TrFE) 복합재료는 P(VDF/TrFE) 공중합체보다 센서용 전기적 특성이 우수함을 나타내었다. 그러므로 이러한 낮은 유전상수와 높은 초전계수를 나타내는 0~3형 $PbTiO_3$/P(VDF/TrFE) 복합재료는 더 높은 성능을 나타낼 수 있는 새로운 초전형 센서 재료로 사용될 수 있다.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2003년도 somma/kms meeting
• /
• pp.360-360
• /
• 2003

• Journal of Magnetics
• /
• 제15권1호
• /
• pp.12-16
• /
• 2010

Combined study of in-situ stress measurements and atomic force microscopy (AFM) revealed drastic stress relaxation in the CoCrPt and PS(styrene)-PVP(vinyl pyridine) polymer hybrid structure that was closely related to the growth structure of the film. We have observed not only no large initial growth stress at the initial stages of film growth but also twice smaller stress in magnitude with opposite sign in the CoCrPt/PS-PVP/Si sample. The microstructural studies using AFM at the various film growth stages revealed that the film growth structure plays an important role in the stress relaxation mechanism of CoCrPt films on a corrugated polymer surface.

• Bulletin of the Korean Chemical Society
• /
• 제11권1호
• /
• pp.11-15
• /
• 1990

The temperature dependence of electrical conductivities and thermoelectric power of $I_2$-doped poly(1,4-penylene vinylene-co-2,5-dimethoxy-1,4-phenylene vinylene)s [poly(PV-co-DMPV)] and poly(1,4-phenylene vinylene-co-2,5-thienylene vinylene)s [poly(PV-co-TV)] were studied. The former copolymers were also doped with $FeCl_3$. All the samples used were in thin film forms. The temperature dependence of electrical conductivity implies that the variable range hopping conduction mechanism applises to these systems. The activation energy for the electrical conduction in dimethoxy-phenylene vinylene (DMPV) copolymers ranged from about 7 to 30 meV depending on the polymer composition and the nature of the dopant. It was significantly higher for $I_2$-doped thienylene vinylene (TV) copolymers, namely 90-200 meV. The values of the room temperature thermoelectric power were $30-70{\mu}V/K$ for DMPV copolymer and $100-800{\mu}V/K$ for TV copolymers. Anisotropy in the electrical conductivities was also studied for oriented films obtained by uniaxial stretching of the precursor polymer films.

• 반도체디스플레이기술학회지
• /
• 제5권1호
• /
• pp.39-43
• /
• 2006

The polyvinyl series organic films as gate insulators of thin film transistor(TFT) have been processed and characterized on the polyether sulphone (PES) substrates . The poly-4-vinyl phenol(PVP) and polyvinyl toluene (PVT) were used as solutes and propylene glycol monomethyl ether acetate(PGMEA) as a solvent in the formation of organic insulators. The cross-linking of organic insulators was also attempted by adding the thermosetting material, poly (melamine-co-formaldehyde) as a hardener in the compound. The electrical characteristics measured in the metal-insulator-metal (MIM) structures showed that insulating properties of PVP layers were generally superior to those of PVT layers. Among the layers of PVP series; copolymer PVP(10 wt%), 5wt% cross-linked PVP(10 wt%), copolymer PVP(20 wt%), 5 wt% cross-linked PVP(20 wt%) and 10 wt% cross-linked PVP(20 wt%), the 10 wt% cross-linked PVP(20 wt%) layer showed the lowest leakage current of 1.2 pA at ${\pm}10V$. The ms value of surface roughness and the capcitance per unit area are 2.41 and $1.76nF/cm^2$ in the case of 10 wt% cross-linked PVP(20 wt%) layer, respectively.

• ETRI Journal
• /
• 제27권2호
• /
• pp.181-187
• /
• 2005

Alkoxy-substituted poly(spirobifluorene)s and their copolymers with a triphenylamine derivative have been synthesized by Ni(0)-mediated polymerization. The polymers were well soluble in common organic solvents. Pure blue-light emissions without the long wavelength emission of poly(fluorene)s have been observed in the fluorescence spectra of polymer thin films. The light emitting diodes with a device configuration of ITO/PEDT:PSS(30 nm)/polymer(60 nm)/LiF(1 nm)/Al(100 nm) have been fabricated. The electroluminescence spectra showed the blue emissions without the long wavelength emission as observed in the fluorescence spectra. The relatively poor electroluminescence quantum yield of the homopolymer (0.017% @ 20 $mA/cm^{2}$) with color coordinates of (0.16, 0.07) has been improved by the introduction of triphenylamine moiety, and the copolymer with derivative exhibited an electroluminescence quantum yield of 0.15 % at 20 $mA/cm^{2}$ with color coordinates of (0.16, 0.08). Moreover, the introduction of polar side chains to the spirobifluorene moiety enhanced the device performance and led to the quantum yields of 0.6 to 0.7 % at 20 $mA/cm^{2}$, although there was some expense of color purities.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.1631-1633
• /
• 2000

A study was carried out on the effect of VDF mol%, on the phase transition presented by P(VDF/TrFE) copolymer cast from dimethylformamide(DMF) solution with molar ratios 70/30 and 80/20. The results from dielectric spectrum and differential scanning calorimetry(DSC) showed that the phase transitions from ferroelectric to paraelectric phase(Curie transition) were observed The Curie point slightly has shifted to high temperature with increasing in VDF mol%, however, the melting point has shifted to low temperature.

• Macromolecular Research
• /
• 제16권3호
• /
• pp.247-252
• /
• 2008

Lithium gel electrolytes based on a mixed polymer matrix consisting of poly(vinylidenefluoride-hexafluoropropylene) (PVDF-HFP) and cyanoresin type M (CRM) were prepared using an in situ blending process. The CRM used in this study was a copolymer of cyanoethyl pullulan and cyanoethyl poly(vinyl alcohol) (PVA) with a mole ratio of 1:1. The mixed plasticizer was ethylene carbonate (EC) and propylene carbonate (PC) with a volume ratio of 1:1. In this study, the presence of PVDF in the electrolytes helps to form a dimensionally stable film over a broad composition range, and decreases the viscosity. In addition, it provides better rheological properties that are suitable for the extrusion of thin films. However, the presence of HFP has a positive effect on generating an amorphous domain in a crystalline PVDF structure. The ionic conductivity of the polymer electrolytes was investigated in the range 298-333 K. The introduction of CRM into the PVDF-HFP/$LiPF_6$, complex produced a PVDF-HFP/CRM/$LiPF_6$ complex with a higher ionic conductivity and improved thermal stability and dynamic mechanical properties than a simple PVDF-HFP/$LiPF_6$, complex.

• 공업화학
• /
• 제10권7호
• /
• pp.1014-1019
• /
• 1999

Dianhydride로서 1,2,4,5-benzenetetracarboxylic dianhydried(PMDA)와 2,2'-bis(3,4-dicarboxyphenyl) hexafluoropropane dianhydride(6FDA)를, diamine으로서 1,4-phenylenediamine(PDA)을 사용하여 homopolyimides인 PMDA-PDA, 6FDA-PDA와 다른 당량비의 copolyimides를 각각의 ploy(amic acid)로부터 제조하였다. 이들 박막에 대하여, thin film stress analyzer(TFSA)를 이용하여 공중합체 폴리이미드 박막의 잔류 응력거동을 공정온도 ($25{\sim}400^{\circ}C$)하에서 전구체의 열적 이미드화에 따라 in-situ로 측정하였고, WAXD분석을 통해 모폴로지 변화를 알아보았다. 다른 단량비로 이루어진 공중합체 폴리이미드 박막의 잔류 응력 결과는 PMDA 분율이 증가함에 따라 잔류 응력이 큰 폭으로 감소하였고 순수 PMDA-PDA 폴리이미드에서는 압축모드로 5 MPa로 나타났다. 본 연구에서는 PMDA-PDA의 높은 $T_g$로 인한 공정상의 어려움과 6FDA-PDA의 상대적으로 높은 응력을 서로 보완해 기계적 물성이 좋은 저응력의 폴리이미드를 만들 수 있음을 보였다. 즉, random한 PMDA/6FDA-PDA 공중합체 폴리이미드 합성을 이용하여 사슬 내에 벌키한 di(trifluoromethyl)기와 같은 관절기로 인한 상대적으로 높은 응력을 보이는 6FDA-PDA 폴리이미드 사슬 내에 강직한 사슬 구조를 가진 PMDA-PDA 폴리이미드의 사슬 구조를 적당량 첨가함으로써 우수한 기계적 물성을 갖는 저응력 폴리이미드를 만들 수 있었다. 특히, PMDA/6FDA-PDA (0.9:0.1:1.0) 폴리이미드가 저유전 상수 층간 절연막으로서의 우수한 기계적 물성과 낮은 응력 수준을 보여주고 있다.