• Journal of the Korea Organic Resources Recycling Association
• /
• v.14 no.3
• /
• pp.85-90
• /
• 2006

The purpose of this research is to design an imitation boiler similar to the waste heat boiler installed on a plasma melting furnace in order to acquire a capability of a thermal design as to the circulation of heat and the discharge of noxious gas inside a boiler and to improve the efficiency of a waste heat boiler using the CFD (Computation Fluid Dynamics) program. The position of corrosion and the generation of a clinker inside a boiler due to temperature changes, combustion gas flows, and corrosive gases inside a boiler are examined to design the structure of an efficient boiler and recycle energy. As a result of this research, the boiler installed on a plasma melting furnace met the conditions of design by cooling the combustion gases discharged after the second combustion from an exhaust port, originally at 1,200 degrees Celsius, down to around 450 degrees Celsius. On the other hand, the circulation of corrosive gases (SOx and HCL) may lead to the generation of corrosion or a clinker in the upper and lower parts of an exhaust port more easily than any other parts of a boiler. Accordingly, the corrosion on the inside and outside walls of a boiler may result in a shortened lifespan of a boiler and an inability to recycle waste heat in an efficient manner. A prevention against corrosion at high and low temperatures needs to be considered in detail.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.483-492
• /
• 2017

This study investigated the quality characteristics of cookies made with chestnut inner peel powder and its potential as a food ingredient. Cookies were made with various levels (0, 10, 20, 30, 40%) of chestnut inner peel powder. Dough pieces were baked for 20 minutes at $180^{\circ}C$ in an electrically heated rotary oven for about 10 minutes, and all items were measured after cooling for 24 hours at normal temperature. Quality characteristics were measured by moisture content, leavening rate, loss rate, spread factor, color, texture profile analysis, and sensory evaluations. The moisture content of cookies was significantly affected by increasing chestnut inner peel powder (p<0.001). The spread factor as well as L-value and b-value of cookies significantly decreased with increasing chestnut inner peel powder content (p<0.001). However, hardness and redness (a-value) of cookies significantly increased with increasing chestnut inner peel powder content (p<0.001). The sensory score showed that cookies added with 20% chestnut inner peel powder had higher color, texture, and overall acceptability scores than other samples. As a result, quality of cookies added with 20% chestnut inner peel powder was the most suitable, and we suggest that chestnut inner peel is a good ingredient for increasing the consumer acceptability and functionality of cookies.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.616-622
• /
• 2016

The heating load using solar hot water is lower in summer than in the other seasons. This decreased heating load leads to the overheating solar collectors and related components. To prevent overheating of the solar collectors, air cooling and shading shields were used. On the other hand, it requires additional mechanical components, and reduces the system reliability. The geothermal heat dump system to release the high temperature heat (over $150^{\circ}C$) transferred from the heat pipe solar collectors was investigated in the present study. Research on the heat dump to cool the solar collector is rare. Therefore, the present study was carried out to collect possible data of a geothermal heat dump to cool the solar collector. A helical type geothermal heat exchanger was buried at a 1.2m depth. Experimentally and numerically, the geothermal heat dump was investigated in terms of the effects of parameters, such as the quantity of solar radiation, aperture area of the collector and the mass flow rate. A pipe length of 50m on the geothermal heat exchanger was suitable with a 0.33 kg/s flow rate. The water reservoir was a possible co-operation solution linked to the geothermal heat exchanger.

• Korean Journal of Materials Research
• /
• v.22 no.1
• /
• pp.46-53
• /
• 2012

In this study, mechanical tests and microstructural analyses including TEM analyses with EDX of precipitates in modified 9Cr-1Mo steel were carried out to determine the cause of embrittlement observed after heat-treatment, which limits the usage of the alloy for power plants. Mod. 9Cr-1Mo steel specimens at austenite temperature were quenched to the molten salt baths at $760^{\circ}C$ and $700^{\circ}C$, in which the specimens were kept for 10 min ~ 10 hr with subsequent air-cooling. Impact tests showed that the impact value dropped abruptly when the specimens were kept longer than 30 min at $\sim760^{\circ}C$ reaching to minima in about 1 hr, and then increasing at further retention. The tensile strength of the specimens reached the minimum value without much change afterward, whereas the values of elongation showed the same trend as that of the impact value. The isothermally heat-treated steel at $700^{\circ}C$ also showed a minimum impact value in about 1 hr. These results suggest that the isothermal heattreatment at 760 and $700^{\circ}C$ for about 1 hr induces temporal embrittlement in Mod. 9Cr-1Mo steel. The microstructural examination of all the specimens with extraction replica of the carbides revealed that the specimens with temporal embrittlement had $Cr_2C$, indicating that the cause of the embrittlement was the precipitation of the $Cr_2C$. In addition, TEM/EDX results showed that the Fe/Cr ratio was 0.033 to 0.055 for $Cr_2C$, whereas it was 0.48 to 0.75 for $Cr_{23}C_6$, making the distinction of the $Cr_2C$ and $Cr_{23}C_6$ possible even without direct electron diffraction analyses.

• Journal of Veterinary Clinics
• /
• v.16 no.2
• /
• pp.375-380
• /
• 1999

This study was conducted to develop an intrauterine inseminator (IUI) to deposit of frozen semen into uterus and to evaluate the results obtained after artificial insemination by IUI. Two Japanese spitzs (2 to 4 years of age) were used as semen donors. Semen was collected by manual masturbation into sterile glass collection tubes and separated into 3 fractions with only the sperm-rich fractions retained for further examination. Sperm motility >70%, sperm concentration of 200 to $400{\times}10^6 cells/ml$$\times$g for 5 min and poured out the suspended solution, and then diluted with 2 ml Tris-buffer which was consisted of 2.4 g Tris, 1.4 g citric acid, 0.8 g glucose, 0.1 $\mu\textrm{g}$/ml streptomycin, 100 IU/ml penicillin, 20 ml egg yolk to 100 ml mili-Q water (Ext I) or supplemented with 8 ml glycerol and 1 ml Equex STM paste to 100 rnl (Ext II). The diluted semen was cooled to 5$^{\circ}C$ in cold room, where the temperature in the sample reached 5$^{\circ}C$. Two h after beginning the cooling procedure, 2 ml of Ext II, also at 5$^{\circ}C$, was added and mixed by gently reversing the tubes several times during 1 h. The final sperm concentration for freezing was approximately $50{\times}10^6 cells/ml$. After equilibration, the semen was loaded into 0.5 ml straw and frozen on the liquid nitrogen vapour in styrofoam box. The straws were thawed at 7$0^{\circ}C$ for precisely 6 sec. After thawing of each straw, the frozen semen can survived over 50% motility. All the females were inseminated twice with 1 ml of $25{\times}10^6 cells/ml$

• Korean Journal of Veterinary Research
• /
• v.43 no.1
• /
• pp.31-39
• /
• 2003

We have investigated the effect of extracellular $Mg^{2+}$ ($[Mg^2+]_o$) on action potential duration (APD) in guinea pig papillary muscles by using microelectrodes. Increasing $[Mg^2+]_o$ resulted in progressive negative inotropic effect, progressive ascending depolarization of membrane potential, and increase in intracellular $Mg^{2+}$ concentration. In addition, increase in $[Mg^2+]_o$ from 1.1 to 3, 6, 10, and 20 mM produced a reversible dose-dependent shortening of both APD at 30% ($APD_{30}$) and 90% repolarization ($APD_{90}$), especially showing a tendency towards more remarkable prominent shortening in $APD_{30}$ than $APD_{90}$. Cooling from 37 to 33 and $27^{\circ}C$ diminished the $[Mg^2+]_o$-induced APD shortening. Increase in extracellular $Ca^{2+}$ concentration from 1.8 to 3.6 and 5.4 mM caused a significant depressed effect on the increasing $[Mg^2+]_o$-induced APD shortening. Furthermore, increase in $[Mg^2+]_o$ from 1.1 to 10 and 20 mM produced a significant depressed effect on the APD shortening induced by extracellular $Ca^{2+}$. Pretreatment of verapamil and imipramine significantly attenuated the increasing $[Mg^2+]_o$-induced APD shortening in both $APD_{30}$ and $APD_{90}$, whereas the $[Mg^2+]_o$-induced APD shortening was not affected by strophanthidin, glibenclamide and tetrabutylammonium. These findings suggest that the effects of $[Mg^2+]_o$ on APD are probably due to a decrease in ionic transport across plasma membrane. In conclusion, the present study indicates that $[Mg^2+]_o$ exerts antiarrhythmic activities by antagonistic actions on intracellular $Ca^{2+}$.

• The Journal of the Petrological Society of Korea
• /
• v.16 no.3
• /
• pp.101-115
• /
• 2007

The CHIME (chemical Th-U-total Pb isochron method) dating on monazite was carried out for two foliated granites from a dextral ductile shear zone in the vicinity of Gangjin area, which is considered to be a southern extension of Sunchang shear zone. The result gives emplacement age of the medium-grained biotite granite and the coarse-grained biotite granite as $183.6{\pm}2.2Ma$(MSWD=0.21) and $171.7{\pm}4.0Ma$(MSWD=0.57), respectively. Microtextures of quartz and feldspar observed in the foliated granite are almost identical with those reported in Jurassic (ca 180 Ma) foliated granites from the Imsil-Namwon area of the Sunchang shear zone, and they constraint that the ductile deformation took place at temperature condition of $300{\sim}550^{\circ}C$. Assuming cooling curves of the foliated granites in this study are similar with those of Jurassic foliated granites from Imsil-Namwon area, dextral ductile shear in the Gangjin area would take place between 172 Ma and 150 Ma, about 10 Ma later than the previous estimation based on CHIME monazite ages.

• The Korean Journal of Malacology
• /
• v.30 no.1
• /
• pp.1-8
• /
• 2014

Oxygen isotope analysis was carried out on a oyster (Crassostrea gigas) from the neolithic age Gagok-ri shell midden site, Dangjin, Korea to determine the seasonality of shellfish gathering and site occupation. Isotope samples were taken from the hinge section of the left valve of the oyster. The isotope values of the shell range from -2.02‰ to -6.05‰ vs PDB. The isotope profile shows a seasonal temperature cycle, providing information related to seasonality of shellfish gathering. The isotope values towards the edge of the hinge are gradually increasing, suggesting progressively cooling and a fall period of shell gathering and site occupation. The result shows that the oxygen isotope analysis using oyster shell hinges can be used for archaeological seasonality studies.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.2
• /
• pp.102-102
• /
• 2014

The NISS (Near-infrared Imaging Spectrometer for Star formation history) onboard NEXTSat-1 is the near-infrared instrument onboard NEXTSat-1 which is being developed by KASI. The main scientific targets are nearby galaxies, galaxy clusters, star-forming regions and low background regions in order to study the cosmic star formation history in local and distant universe. After the Preliminary Design Review, we have fixed major specifications of the NISS. The off-axis optical design with 15cm apertureis optimized to obtain a wide field of view ($2deg.{\times}2deg.$), while minimizing the sensitivity loss. The opto-mechanical structure of the NISS was designed to be safe enough to endure in the launching condition as well as the space environment. The tolerance analysis was performed to cover the wide wavelength range from 0.95 to $3.8{\mu}m$ and to reduce the degradation of optical performance due to thermal variation at the target temperature, 200K. The $1k{\times}1k$ infrared sensor is operated in the dewar at 80K stage. We confirmed that the NISS can be cooled down to below 200K in the nominal orbit through a radiative cooling. Here, we report the preliminary design of the NISS.

• Journal of the Korea Concrete Institute
• /
• v.26 no.3
• /
• pp.315-321
• /
• 2014

Concrete as a construction material is widely used in nuclear vessel and plant for excellent radiation shielding. However the isolation characteristics in concrete may affect adversely in the case of fire and melt-down in nuclear vessel since temperature cooling down is very difficult from outside. This study is for development of high thermal conductive concrete, and its mechanical and thermal properties are evaluated. Magnetite aggregates with volume ratio of 42.3% (maximum) and steel powder of 1.5% are replaced with normal aggregates and thermal properties are evaluated. Thermal conductivity little increases by 30% addition of magnetite but rapidly increases afterwards. Finally thermal conductivity is magnified to 2.5 times in the case of 42.3% addition of magnetite. Steel powder has a positive effect on high thermal conduction to 106~113%. Several models for thermal conduction like ACI, DEMM, and MEM are compared with test results and they are verified to reasonably predict the thermal conductivity with increasing addition of magnetite aggregates and steel powder.