In this study, the contamination level was measured using an ATP meter using adenosine triphosphate bioluminescent material to find effective infection control to compensate for the disadvantages of the microbial culture method used for hygiene control of ultrasound probe. The convex probes were selected from six ultrasound probe in the hospital, and the samples were taken in real time before and after cleaning to check the contamination of the probe. In order to classify the pollution degree using the APT meter was classified by category. A total of 78 samples were collected from the ultrasound probe. When the pollution levels before and after cleaning were classified by category, 76.6% of the samples were classified into category 3·4 before cleaning, but they decreased to 23.3% after cleaning. 13.3% before cleaning was in category 1, but increased to 43.3% after cleaning. By classifying the pollution level, it was confirmed that the pollution level was significantly reduced by category. Until now, there was no suitable criterion for determining the contamination level by using ATP meter in medical machines where sample area is small and reused. In this study, criteria for each category were set to measure the contamination level of ATP meter suitable for small sample area such as ultrasound probe, so that contamination level could be determined in real time at the site. Therefore, it is considered that hygiene management for ultrasound probe can be more actively performed.
The setting parameters of ultrasound scanner give influences to change of image. Sonographers have used a Matlab program to make Low Contrast Sensitivity(LCS) value and compared original images in order to evaluate the use of the supersonic diagnosis machinery. We confirmed the change of image in Grayscale values using Photoshop program. Experiment equipment of our research used A Medison Accuvix V10, A Multi-Tissue Ultrasound Phantom(040 GSE) of CHRIS Company, A Adobe Photoshop CS4 Program, A Convex Probe, A USB memory stick, A Probe Fixation Equipment. The method used Gain, Dynamic Range(DR) of the setting parameters of ultrasound scanner and researched Gain and DR was set to 10 dB. We changed the different settings to see the changes of images using Grayscale values of a Photoshop program about tissue images of a phantom. This study evaluated DR and Gain whether it is an image controller to get the optimum contrast to produce an image to see the how effect on the images. We did not use Gateway in supersonic diagnosis machinery. We can easily open to open the files through Photoshop program before we get Digital Imaging and Communications in Medicine(DICOM) files use USB memory stick in supersonic diagnosis machinery. When we diagnosed the lesion of the patient with ultrasound, the contrast and the Gray scale value of image are very important. In this research, we determined the optimum setting parameters that provided useful information to diagnose disease and evaluated the change of improved images.
트래픽 분류는 트래픽 관리하는데 중요한 역할을 차지하고 있다. 전통적인 방법은 P2P와 암호화 트래픽을 제대로 분류할 수 없는 문제가 있다. 서포트 벡터 머신은 기존의 문제를 해결할 수 있고 병목 현상을 극복할 수 있는 유용한 분류 도구이다. 하지만 서포트 벡터 머신의 주요 장점은 이차 프로그래밍(QP)문제 때문에 큰 데이터 집단을 훈련하는데 시간을 소모한다. 그러나 유용한 서포트 벡터는 전체 데이터에서 극히 일부분이다. 만약 우리가 훈련전에 쓸모없는 벡터들을 삭제할 수 있다면, 시간을 절약하고 정확도를 유지할 수 있다. 이 논문에서 우리는 대규모 데이터를 다룰 때 훈련 속도를 빠르게 하기위해 순차적인 방법을 통해 쓸모없는 벡터들을 제거하기 위한 가능성을 논의하였다.
Wind tunnel testing technique has been established as a powerful experimental method for predicting wind-induced loads on high-rise buildings. Accurate assessment of the design wind load combinations for tall buildings on the basis of wind tunnel tests is an extremely important and complicated issue. The traditional design practice for determining wind load combinations relies partly on subjective judgments and lacks a systematic and reliable method of evaluating critical load cases. This paper presents a novel optimization-based framework for determining wind tunnel derived load cases for the structural design of wind sensitive tall buildings. The peak factor is used to predict the expected maximum resultant responses from the correlated three-dimensional wind loads measured at each wind angle. An optimized convex hull is further developed to serve as the design envelope in which the peak values of the resultant responses at any azimuth angle are enclosed to represent the critical wind load cases. Furthermore, the appropriate number of load cases used for design purposes can be predicted based on a set of Pareto solutions. One 30-story building example is used to illustrate the effectiveness and practical application of the proposed optimization-based technique for the evaluation of peak resultant wind-induced load cases.
블록체인의 확장성 문제를 해결하기 위한 이더리움 샤드 시스템은 부하 균형 문제가 존재하며 이는 그래프 분할 문제로 모델링된다. 본 논문에서는 게임 이론의 협상 해법을 사용하여 이더리움 샤드 시스템의 상반된 효용에 대한 협상이 가능한 적응적 온라인 가중그래프 분할 알고리즘을 제안한다. 게임 이론의 협상 해법은 상반된 효용의 협상점을 공정하게 결정할 수 있는 공리적 해법이다. 제안 알고리즘은 기존 온라인 그래프 분할 알고리즘을 가중그래프에 적용할 수 있도록 개선하였으며 대표적인 교섭 해법인 내쉬 협상 해법을 확장한 확장 내쉬 협상 해법을 사용하여 이더리움 시스템 상황을 고려한 설계를 통해 효과적으로 부하 균형을 수행하였다. 실험 결과, 대표적인 온라인, 오프라인 그래프 분할 알고리즘에 비해 최대 37% 우수한 성능을 보였다.
Sparse unmixing has been proven to be an effective method for hyperspectral unmixing. Hyperspectral images contain rich spectral and spatial information. The means to make full use of spectral information, spatial information, and enhanced sparsity constraints are the main research directions to improve the accuracy of sparse unmixing. However, many algorithms only focus on one or two of these factors, because it is difficult to construct an unmixing model that considers all three factors. To address this issue, a novel algorithm called multiview-based spectral weighted and low-rank row-sparsity unmixing is proposed. A multiview data set is generated through spectral partitioning, and then spectral weighting is imposed on it to exploit the abundant spectral information. The row-sparsity approach, which controls the sparsity by the l2,0 norm, outperforms the single-sparsity approach in many scenarios. Many algorithms use convex relaxation methods to solve the l2,0 norm to avoid the NP-hard problem, but this will reduce sparsity and unmixing accuracy. In this paper, a row-hard-threshold function is introduced to solve the l2,0 norm directly, which guarantees the sparsity of the results. The high spatial correlation of hyperspectral images is associated with low column rank; therefore, the low-rank constraint is adopted to utilize spatial information. Experiments with simulated and real data prove that the proposed algorithm can obtain better unmixing results.
연조직 측모는 교정치료와 진단에 있어서 중요한 부분이며, 안모 심미성에 대한 개념은 긴 역사를 가지고 변천하여 왔으며 지역이나 문화, 성별, 인종, 관습 등에 따라서 그 심미관이 상이하다. 본 연구에서는 대중들의 연조직측모 선호도를 조사하기 위하여 교정환자들의 주 연령층인 사춘기성장가속기 전의 초등학생, 사춘기 연령의 학생, 20대의 대학생들과 보호자의 주연령층인 40-50대 층을 대상으로 설문조사를 시행하였다. 설문지의 제작을 위해 기존의 심미적인 안면의 경, 연조직 형태에 관한 연구에서 얻은 연조직 평균계측치에 가까운 연조직 측모를 가진 20대 여성 한 명을 선정한 후 측모천연색 사진을 촬영하여 표준측모로 사용하였다 전체 설문지는 7 set로 이루어져 있으며, 각 set는 측모에 영향을 줄 수 있는 입술의 돌출도, 코, 이부의 높이와 Sn point를 표준측모에서 변화시킨 천연색 측모형들을 포함하고 있다. 가장 좋다고 생각되는 안모는 1점, 가장 좋지 않다고 생각되는 안모를 5점의 순서로 통계처리를 하여 각 응답자군들의 연조직측모 선호도를 알아보았으며, 성별, 연령에 따른 선호도의 차이를 조사하였다. 또한 대중들이 선호하는 안모와 선호하지 않는 안모와 하안면 측모의 심미적 평가를 위해 기존에 사용되는 기준선들간의 신뢰성을 평가하여 다음의 결과를 얻을 수 있었다. 1.응답자의 신뢰도를 평가시 유년기에서 다른 group들에 비해 낮은 값을 나타내었다. 이는 유년기에서는 아직은 측모선호도에 대한 관심이 없는 것으로 평가하였다. 2. 측모 선호도의 연령, 성별 차이는 뚜렷하지 않은 것으로 나타났다. 3. 가장 선호하는 측모보다 가장 선호하지 않는 측모에 대한 선택의 일치도가 더 높았다. 4.응답자의 group별로 순위의 일치성을 나타내는 Kendall의 일치계수(W)는 20대에서 가장 높게 나타났다 이는 다른 연령에 비해 측모에 대한 선호성에 대한 기준이 명확한 것을 나타낸다. 5. 응답자들이 가장 선호하는 측모의 구순돌출도는 심미적인 안모에 대한 이전 연구에서의 Ricketts의 nose tip-Pog line(E-line), Burstone의 Sn-Pog line(B-line)에 대한 평균치에 가까운 값을 나타내었다 이는 이들 기준선들이 임상적으로 유용하게 사용할 수 있음을 의미한다. 6. 응답자들이 가장 선호하지 않는 측모는 E-line과 B-line에 대해 구순이 너무 돌출되거나 후퇴된 경우였다. 7. 응답자들의 측모 선호도는 straight, concave, convex profile순으로 나타났다.
본 연구는 공간구문론(Space syntax)을 이용하여 조선 후기에 제작된 <동궐도(東闕圖)>의 판장의 설치에 따른 주요 권역별 공간변화를 비교하여 판장의 공간분할 기능과 역할을 재해석하였다. 연구방법으로는 <동궐도>의 공간을 단위 공간으로 분해하기 위한 설정 기준을 마련하였고, 판장의 설치 전·후에 따라 2개의 볼록공간도를 작성해 공간구문변수인 연결도, 통제도, 통합도 값을 산출하여 비교분석하였다. 연구의 결과는 다음과 같다. 첫째, <동궐도> 내 가림시설은 전각공간에 대한 변수의 평균값을 비교하였을 때, 동궐의 전체적인 배치에서 통제와 연결은 영향이 크지 않았다. 다만 특정 권역 내 공간의 접근성 측면에서 영향을 주었다. 가림시설이 집중적으로 설치된 내전과 동궁 그리고 후원으로 이동할 수 있는 공간을 중심으로 이동과 접근에 제한을 주었다. 둘째, 판장은 내전과 동궁에 집중적으로 분포되어 공간의 활용방식에 적극적으로 이용된 시설로 판장의 설치에 따른 공간의 특성이 뚜렷하게 나타났으며 기능에서도 차이가 확인되었다. 내전의 수정전 권역과 희정당 권역 그리고 동궁의 성정각 권역에 판장을 설치함으로써 개방적이고 통제성이 높았던 공간이 통제성이 낮은 폐쇄적인 공간으로 변모하였고 사적인 공간이 조성되었다. 동궁의 완영당 권역은 판장을 여러 방향으로 설치함으로써 공간의 깊이를 증가시켰다. 이는 거쳐서 오는 공간의 수가 증가됨으로써 자유롭고 은신이 가능한 공간이 조성되었다. 셋째, 판장은 기존 선행연구에서 밝혔던 '시선차단·공간분리·동선조절'의 기능 이외에 '접근통제가 용이한 공간'을 조성하였다. 일정한 공간으로 유도함과 동시에 동선이 집중됨에 따라 접근 통제가 가능한 공간이 되었으며, 판장의 개수와 배치에 따라 집중형 통제공간과 분산형 통제공간을 조성하였다. 본 연구는 그 간 가림시설의 기능과 역할에 대한 연구 외에 판장에 대한 기능을 수학적 모델로 분석하여 특정 공간속에서 판장이 어떠한 양상으로 공간을 통제하였는지 수치적으로 확인하였고, 공간의 통제와 연결, 은신과 개방성 등의 해석으로 연구의 방법을 확장한 것에 의의가 있다. 또한 연구의 방법론이었던 공간구문론을 <동궐도>에 적용하기 위해 궁궐의 건축 및 조경요소의 단위공간 분할 및 연결 유형에 따른 기준을 마련함으로써 궁궐과 유사한 전통주거단지에서도 적용이 가능한 분석툴을 마련하였다는 점에서 가치가 있다. 그러나 공간구문론의 분석을 통해 결과적으로 제공되는 것은 공간조직이 가지는 구성적 특질을 표현하는 숫자들로 제한된 체계 내에서만 의미를 가진다는 한계가 있다.
난대림에 서식하는 노루(Capreolus pygargus)의 생태 연구 일환으로 제주도에 위치한 국립산림과학원 난대·아열대산림연구소 제주시험림에서 실시하였다. 노루의 행동권과 서식환경을 파악하기 위해 2012년 4월 24일부터 수컷 3마리, 암컷 3마리의 노루를 포획한 후 GPS-CDMA 기반 추적기를 목에 부착하여 방사하였다. 암컷 중 2마리는 임신한 상태였으며 서귀포시 남원읍 한남리에 위치한 시험림에서 포획 및 관찰하였다. 암노루의 위치 추적을 통해 출산 전에는 불규칙인 이동이 관찰되다가 출산 후 일정한 지점으로 되돌아오는 규칙성을 보인다는 것을 확인할 수 있었다. 행동권 분석은 ESRI ArcView GIS 3.2a의 MCP(minimum convex polygon)와 Kernel Method를 사용하였다. 5월 9일에 포획한 암노루는 MCP=67ha, Kernel 95%=0.5ha이고 7월 12일에 포획한 암노루는 MCP=82ha, Kernel 95%=0.9ha로 확인되었다. 행동권 면적 변화를 살펴보면, 출산직후 새끼노루와 암노루는 위험노출을 줄이기 위해 타 동물들처럼 즉시 이동할 수 있음에도 대단히 좁은 지역에서 한동안 머물다 시간이 경과함에 따라 점차 행동권을 점차 넓혀가는 경향을 보였다. 암노루는 사람출입이 잦은 탐방로의 반대방향으로 주로 이동하였다. 암노루가 출산한 지역은 40년생 삼나무가 식재된 인공림으로 2010년 숲가꾸기를 통해 삼나무를 제외한 하층식생이 제거되었다가 현재는 먹이자원이 되는 새로운 관목이 우거진 곳이었다. 이러한 결과는 산림시업이 노루의 출산과 어린새끼의 생존에 긍정적인 영향을 미칠 수 있다는 의미이다. 난대림에서 암노루의 출산 시기는 제주도 내 높은 고도에서보다 다소 빨랐으며 행동권 면적은 다른 국가의 선행연구에 비해 좁게 나타났고 새끼를 숨기는 은신처의 서식환경은 다른 나라에서 연구된 보고와 비슷하였다.
시공이음부 발생에 따른 초고성능 콘크리트의 일체성을 확보하기 위해서는 그 특성을 수반함과 동시에 전단부착성능에 대한 정량적인 계면처리방법이 필요할 것으로 판단된다. 이에, 본 연구는 초고성능 콘크리트 타설 시, 발생하는 시공이음부의 부착성능을 확보하기 위한 일환으로서 시공이음부 계면처리방법에 따른 전단부착성능 평가를 통하여 재료적인 측면에서의 합리적인 계면처리방법을 도출하고자 한다. 초고성능 콘크리트 배합은 180MPa의 배합강도를 사용하였으며, 계면처리방법으로는 MN, AC, GR-10-0, GR-20-0, GR-30-0, SH-30-5, SH-30-10으로써 총 7수준으로 설정하였다. 실험체는 $150{\times}150{\times}150mm$의 Size로 제작 후, 전단부착강도 평가를 위하여 Direct shear test를 실시하였다. 실험결과, 시공이음부 접합면에 대해 계면처리를 실시한 경우 부착성능이 향상되는 것을 확인하였으며, 접합부 단면적이 증가할수록 초고성능 콘크리트의 일체성 확보에 유리할 것으로 판단된다. 또한 콘크리트의 일체성을 확보하기 위해서는 접합면 단면적의 비율 및 요철의 깊이, 개수 등이 적절히 고려되어야 할 것으로 판단된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.