• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.43 no.3 s.309
• /
• pp.54-60
• /
• 2006

This paper presents an effective algorithm for transcoding between the Enhanced Variable Rate Codec(EVRC) and G.729A. The simplest way to communicate between heterogeneous speech networks is the cascade connection of two different codecs, called tandem coding. However, tandem coding not only produces high computational loads, but also makes long delay, These problems can be solved by using the transcoding algorithm. The proposed algorithm consists of LSP (Line Spectral Pair) conversion, pitch delay conversion and algorithm for reduction of delay. Experimental results show the proposed algorithm produces lower computational complexity, shorter algorithm delay, and similar speech quality when compared with the tandem algorithm.

• Korean Journal of Computational Design and Engineering
• /
• v.5 no.3
• /
• pp.276-284
• /
• 2000

Usual practice of the transformation of a B-spline curve into a set of piecewise polynomial curves in a power form is done by either a knot refinement followed by basis conversions or applying a Taylor expansion on the B-spline curve for each knot span. Presented in this paper is a new algorithm, called a direct expansion algorithm, for the problem. The algorithm first locates the coefficients of all the linear terms that make up the basis functions in a knot span, and then the algorithm directly obtains the power form representation of basis functions by expanding the summation of products of appropriate linear terms. Then, a polynomial segment of a knot span can be easily obtained by the summation of products of the basis functions within the knot span with corresponding control points. Repeating this operation for each knot span, all of the polynomials of the B-spline curve can be transformed into a power form. The algorithm has been applied to both static and dynamic curves. It turns out that the proposed algorithm outperforms the existing algorithms for the conversion for both types of curves. Especially, the proposed algorithm shows significantly fast performance for the dynamic curves.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2126-2130
• /
• 2003

In the integrated systems, that is integrated digital TV(DTV) internet and home automation, like home server, is needed integration of digital TV video signal and computer graphic signal. The graphic signal is operating at the high speed and has time-divide-stream. So the re-request of data is not easy at the time of error detection. therefore EDAC algorithm is efficient. In this paper, we show a scheme, that is integration of graphic and dtv format signal for DTV monitor display. This paper also presents the efficiency error detection auto correction(EDAC) for conversion of graphics signal to DTV video signal. A presented EDAC algorithms use the modified hamming code for enhancing video quality and reliability. A EDAC algorithm of this paper can detect single error, double error, triple error and more error for preventing from incorrect correction. And it is not necessary an additional memory. In this paper The comparison between digital TV video signal and graphic signal, a EDAC algorithm and a design of conversion graphic signal to DTV signal with EDAC function in DTV system is described.

• Management Science and Financial Engineering
• /
• v.11 no.2
• /
• pp.85-103
• /
• 2005

In this paper, we consider the routing and wavelength assignment problem in survivable WDM transport network without wavelength conversion. We assume the single-link failure and a path protection scheme in optical layer. When a physical network and a set of working paths are given, the problem is to select a link-disjoint protection path for each working path and assign a wavelength for each working and protection path. We give an integer programming formulation of the problem and propose an algorithm to solve it. Though the formulation has exponentially many variables, we solve the linear programming relaxation of it by using column generation technique. We devise a branch-and price algorithm to solve the column generation problem. After solving the linear programming relaxation, we apply a variable fixing procedure combined with the column generation to get an integral solution. We test the proposed algorithm on some randomly generated data and test results show that the algorithm gives very good solutions.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1986.10a
• /
• pp.56-58
• /
• 1986

This paper propose a conversion method to reduce prediction error produced when PRA(Pel Recursive Algorithm) motion estimation method is used in real image. The method is th get a spatial difference image from a given raw image and then to apply any PRA method to the difference image. The algorithm proposed in this paper is compared with several algorithm including the ubiquitious Netravali and Robbins` based on the performance and the hardware complexity. Computer simulation shows that the difference image conversion method is about 4.5dB better than the other algorithm with regard to prediction error power.

• ETRI Journal
• /
• v.24 no.2
• /
• pp.131-141
• /
• 2002

This paper considers a routing and wavelength assignment problem (RWAP) for the implementation of efficient Wavelength Division Multiplexing all-optical mesh networks without wavelength conversion. For a given physical network and required connections, the solution to the RWAP consists in how to select a suitable path and wavelength among the many possible choices for each connection so that no two paths using the same wavelength pass through the same link, while minimizing the number of required wavelengths. We introduce an integer programming formulation of the RWAP, which has an exponential number of variables, and propose an algorithm to solve it based on the column generation technique. The proposed algorithm can yield high quality solutions and tight lower bounds at the same time. Though the proposed algorithm cannot guarantee optimal solutions, computational results show that the algorithm yields provably good solutions within a reasonable time.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.12
• /
• pp.1009-1014
• /
• 2001

The ladder diagram (LD) for programmable logic controllers (PLCs) ar responsible for much important roles in advance industrial automation. As automated systems become more complex the design procedures of the system become more difficult as well. Hence. the design automation issues based on discrete event models(DEMs) are receiving more attention. One of the popular ways of tackling these problems is employing Petri nets. In this paper, we use the modified automation Petri net(MAPN) to model the manufacturing system and the modified token passing logic (MTPL) method conversion (ECC) algorithm based on the MAPN and the MTPL Finally, an example of the manufacturing system is provided to illustrate the proposed ECC algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.8C
• /
• pp.729-737
• /
• 2007

The H.264/AVC video coding standard provides higher coding efficiency compared to the conventional MPEG-2 standard. Since a lot of videos have been encoded using MPEG-2, the format conversion from MPEG-2 to H.264 is essential. In this paper, we propose an efficient method for the conversion of DCT coefficients to H.264/AVC transform coefficients. This conversion is essential, since $8{\times}8$ DCT and $4{\times}4$ integer transform are used in MPEG-2 and H.264/AVC, respectively. The mathematical analysis and computer simulation show that the computational complexity of the proposed algorithm is reduced compared to the conventional algorithm, while the loss caused by the conversion is negligible.

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.429-432
• /
• 2000

We propose a new frame rate up-conversion algorithm for high quality video. In the proposed scheme bidirectional motion estimation (ME) is performed to construct the motion vector. (MV) field for the frame to be interpolated. Unlike conventional motion-compensated interpolation (MCI) algorithms, the proposed technique does not produce any overlapped pixel and hole region in the interpolated frame, and thus can utilize the overlapped block motion compensation technique to reduce the blocking artifacts. The proposed algoritm is very simple to implement on consumer products when compared to conventional MCI methods. Computer simulation shows a high visual performance of the proposed frame rate up-conversion algorithm.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.2
• /
• pp.529-538
• /
• 2015

Due to the high efficiency and compact mechanical structure, direct drive variable speed generators are used for power conversion in wind turbines. The wind energy conversion system (WECS) considered in this paper consists of a permanent magnet synchronous generator (PMSG), uncontrolled rectifier, dc-dc boost converter controlled with maximum power point tracking (MPPT) and adaptive hysteresis controlled voltage source inverter (VSI). For high utilization of the converter's power capability and stabilizing voltage and power flow, constant DC-link voltage is essential. Step and search MPPT algorithm which senses the rectified voltage ($V_{DC}$) alone and controls the same is used to effectively maximize the output power. The adaptive hysteresis band current control is characterized by fast dynamic response and constant switching frequency. With MPPT and adaptive hysteresis band current control in VSI, the DC link voltage is maintained constant under variable wind speeds and transient grid currents respectively.