• 한국전자파학회논문지
• /
• 제28권1호
• /
• pp.1-9
• /
• 2017

본 논문에서는 한국전자통신연구원(ETRI)에서 구축한 $0.25{\mu}m$ GaN MMIC 공정 및 소자특성을 소개하고, 이를 이용한 X-대역 3 W GaN 전력증폭기 MMIC 설계 제작 결과를 논의한다. X-대역 동작에 적합한 GaN HEMT 소자를 선정하여 GaN 전력증폭기 MMIC를 1단으로 설계하고 제작하였으며, 이를 통하여 ETRI $0.25{\mu}m$ GaN MMIC 공정 및 특성을 평가하고 분석하였다. X-대역 GaN 전력증폭기 MMIC 제작 결과, 출력전력 3.5 W, 이득 10 dB 및 전력부가효율 35 % 특성을 얻었다.

• 한국산업융합학회 논문집
• /
• 제23권2_2호
• /
• pp.289-299
• /
• 2020

The composition of convergence cross-section of the material is a technique that provides reasonable design and construction of structures. It is frequently used in medium-sized bridges and architectural structures. However, the structural behavioral spare capacity enhancement of the structure by the application of the convergence cross-section is still limited by the expandability due to the limiting state of each material. In order to overcome these limitations, this study reasonably analyzed the construction stages before and after the convergence cross-section constructed and developed a technique for forming multi-point boundary conditions using struts, which are compression members. Based on the existing cases, a reasonable construction step for forming the material composite section of the entire structural system of the structure was derived, and a numerical analysis model for a specific part was constructed to analyze the behavior of the strut application. As a result of this study, the effect of reducing the sectional force of 7.40% in beam-column joint and 6.31% in the center of girder was derived, and the deflection, which is a measure of the serviceability of the structure, improved by 54.41% from the installation and dismantling of strut members at each construction stage.

• 한국전자파학회논문지
• /
• 제27권1호
• /
• pp.76-79
• /
• 2016

본 논문에서는 ETRI에서 개발된 50 W GaN-on-SiC HEMT 소자를 이용하여 X-band에서 동작하는 50 W 펄스 전력증폭기의 개발 결과를 정리하였다. 제작된 50 W GaN HEMT 소자는 $0.25{\mu}m$의 게이트 길이를 갖고, 총 게이트 폭은 12 mm인 소자이다. 펄스 전력증폭기는 9.2~9.5 GHz 주파수 대역에서 50 W의 출력전력과 6 dB의 전력이득 특성을 나타내었다. 전력소자의 전력밀도는 4.16 W/mm이다. 제작된 GaN-on-SiC HEMT 소자와 전력증폭기는 X-대역 레이더 시스템 등 다양한 응용분야에 적용이 가능할 것으로 판단된다.

• ETRI Journal
• /
• 제43권5호
• /
• pp.916-922
• /
• 2021

We calculated the correlation between the doping concentration of the charge layer and the multiplication layer for separate absorption, grading, charge, and multiplication InGaAs/InAlAs avalanche photodiodes (APDs). For this purpose, a predictable program was developed according to the concentration and thickness of the charge layer and the multiplication layer. We also optimized the design, fabrication, and characteristics of an APD for 20 Gbps application. The punch-through voltage and breakdown voltage of the fabricated device were 10 V and 33 V, respectively, and it was confirmed that these almost matched the designed values. The 3-dB bandwidth of the APD was 10.4 GHz, and the bit rate was approximately 20.8 Gbps.

• 한국산업융합학회 논문집
• /
• 제23권2_2호
• /
• pp.361-374
• /
• 2020

Recently, small and medium-sized rahmen-type bridges have been developed as a technology that ensures the stability of structural behavior and the safety of use at the same time by using efficient and economical materials that make up the convergence section of reinforced bar, structural steel and concrete. This study is about a rahmen-type structure applied with the installation and dismantling of the strut. It improves the serviceability of the structure by forming multi-points and efficiently applies the convergence section of structural steel and concrete materials to the structural system changes to induce the displacement improvement effect additionally. By constructing mock-up models for the beam-column joint, the displacement was calculated and compared, and this was compared and analyzed by numerical analysis. The final displacement showed an improvement effect of 13.46% to 36.28% based on the vertical displacement of the existing structure without struts through the experiment of the mock-up models. As a result of analysis by numerical analysis method, the displacement improvement effect of 42.89% could be derived.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.292-292
• /
• 2014

Wide band gap semiconductors, such as III-nitrides (GaN, AlN, InN, and their alloys), SiC, and diamond are expected to play an important role in the next-generation electronic devices. Specifically, GaN-based high electron mobility transistors (HEMTs) have been targeted for high power, high frequency, and high temperature operation electronic devices for mobile communication systems, radars, and power electronics because of their high critical breakdown fields, high saturation velocities, and high thermal conductivities. For the stable operation, high power, high frequency and high breakdown voltage and high current density, the fabrication methods have to be optimized with considerable attention. In this study, low ohmic contact resistance and smooth surface morphology to AlGaN/GaN on 2 inch c-plane sapphire substrate has been obtained with stepwise annealing at three different temperatures. The metallization was performed under deposition of a composite metal layer of Ti/Al/Ni/Au with thickness. After multi-layer metal stacking, rapid thermal annealing (RTA) process was applied with stepwise annealing temperature program profile. As results, we obtained a minimum specific contact resistance of $1.6{\times}10^{-7}{\Omega}cm2$.

• Journal of Welding and Joining
• /
• 제35권3호
• /
• pp.28-34
• /
• 2017

The authors derived the criteria on the process parameters of laser depositions with metal powers(SUS316L & IN718) by evaluating the surface and cross-section properties of the deposition layers. The surface characteristics of the deposition layer are investigated through optical microscopy by controlling the process parameters of laser output, powder feeding rate and gas feeding rate. The cross-section characteristics were also analyzed after polishing and chemical etching process. As the gas feeding rate increased, the amount of powder loss increased and the difference in the dilution ratio and heat affected zone depending on laser outputs was observed. In addition, the powder feeding rate used in the experiment did not interfere with the energy absorption of the base material.

• 한국멀티미디어학회논문지
• /
• 제18권12호
• /
• pp.1432-1438
• /
• 2015

We present a methodology to detect moving shadows in video sequences, which is considered as a challenging and critical problem in the most visual surveillance systems since 1980s. While most previous moving shadow detection methods used hand-crafted features such as chromaticity, physical properties, geometry, or combination thereof, our method can automatically learn features to classify whether image segments are shadow or foreground by using a deep learning architecture. Furthermore, applying Markov Random Field enables our system to refine our shadow detection results to improve its performance. Our algorithm is applied to five different challenging datasets of moving shadow detection, and its performance is comparable to that of state-of-the-art approaches.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2013년도 춘계학술대회
• /
• pp.201-203
• /
• 2013

삼면이 바다로 이루어진 우리나라의 특징상 다른 나라로의 이동은 하늘길과 바닷길로만 가능하다. 외국과의 다양한 교류로 인해 비행기와 배를 이용한 승객 및 물류가 증대하면서 항공 교통량과 해상 교통량은 급속도로 증가하는 추세이다. 항공관제는 해상관제와는 서로 다르면서도 비슷한 측면이 존재하므로 항공관제 시스템을 분석함으로써 향후 해상교통관제의 발전 방향을 살펴보는데 의미가 있다. 본 논문에서는 항공관제와 해상관제와의 차이점, 항공관제 시스템의 구성과 해상교통관제 시스템의 구성을 비교하고, 이를 통해 항공관제 시스템에서 해상교통관제 시스템에 적용할 수 있는 기능을 도출한다.

• 대한조선학회논문집
• /
• 제58권6호
• /
• pp.358-365
• /
• 2021

Crabbing motion is a pure sway motion with only sway velocity. The ship's crabbing motion is essential for an ideal berthing/unberthing process. The unberthing situation proceeds in sequential order such as crabbing motion section, pivoting section, and outer port section. For the berthing situation, the sequence has a reverse order: the inner port section, pivoting section, and crabbing motion section. In this paper, the berthing/unberthing data of the reference ship, Pukyong National University research ship "NARA", was analyzed to develop a sway velocity reference model. Several constraints were defined to derive the crabbing motion section during berthing/unberthing. The sway velocity reference model for the auto-berthing/unberthing was developed using the estimated sway velocity. A reproduction simulation of the ship was performed to compare the designed reference model and the reference ship data.