• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.1
• /
• pp.73-81
• /
• 2020

This study analyzed the causes of failure of SCM435 bolts that fix the springs of automobile air brakes that have been fractured during use. The cause of failure was analyzed using SEM, EDS, metallogical microscope and Vickers hardness tester. In the fracture, the ratchet mark began at the outer boundary of crack origin, and the grains at crack origin were found to have clear intergranular corrosion. One SCM435 bolt was subjected to a stress of 398 MPa, it's a stress of about 80% of the fatigue limit. As a result of such a large applied stress, cracks occurred at the corrosion origin and were fractured. In order to prevent the SCM435 bolt from fracture, it is necessary to use the correct composition, the accuracy of heat treatment, preventing damage by external impact, preventing corrosion of the damage part by moisture, and introduction a compressive residual stress by peening.

• Journal of Digital Convergence
• /
• v.13 no.7
• /
• pp.177-182
• /
• 2015

In a MPC(Multi-Pulse Coding) using excitation source of voiced and unvoiced, it would be a distortion of voice waveform. This is caused by normalization of synthesis speech waveform of voiced in the process of restoration. To solve this problem, this paper present APC-MPC of amplitude-position compensation in a multi-pulses each pitch interval in order to reduce distortion of synthesis waveform. Also, I was implemented that the APC-MPC in coding system. And I evaluate the SNRseg of APC-MPC in 8kbps coding condition of convergence system. As a result, SNRseg of APC-MPC was 13.9dB for female voice and 14.3dB for male voice respectively. And so, I expect to be able to this method for cellular phone and smart phone using excitation source of low bit rate.

• Korean Journal of Computational Design and Engineering
• /
• v.19 no.4
• /
• pp.434-442
• /
• 2014

Most manufacturing enterprises create CAD data as a result of the product/part design process; however, the CAD data is being utilized only for production activities. Besides the processes directly related to manufacturing such as design and production, the CAD data is an important resource that can be used in variety of services (e.g., catalog production and production manuals) for manufacturing enterprises. This study proposes a software platform that can support a wide range of services for manufacturing companies in an efficient and productive way. The software platform was designed based on the functions identified by requirement analysis. The platform consists of four layers: data model layer to manage relevant data; library layer and common function layer to configure services; and application layer to install and run the software. Finally, this study evaluates the validity of the proposed platform architecture by applying it to the digital catalog system.

• Carbon letters
• /
• v.16 no.1
• /
• pp.62-66
• /
• 2015

In this study, carbonized fibers were prepared by using acidically cross-linked LDPE fibers. The surface morphologies of the carbonized fibers were observed by SEM. The effects of cross-linking process temperatures were studied using thermal analyses such as DSC and TGA. The melting and heating enthalpy of the fibers decreased as the cross-linking temperature increased. The cross-linked fibers had a carbonization yield of over 50%. From SEM results the highest yield of carbonized LDPE-based fibers was obtained by cross-linking at a sulfate temperature ($170^{\circ}C$). As a result, carbonation yield of the carbonized fibers was found to depend on the functions of the cross-linking ratio of the LDPE precursors.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.22 no.3
• /
• pp.209-215
• /
• 2004

Together with the requirements of tunnels, its construction methods and technologies have been pretty much developed, but frequent accidents happened under the constructions are just one of important problems which should be improved. To detect the potential hazardous factors in or ahead of time, speedy and accurate observation are absolutely required, but currently surveying method using tapes, level and total station, has been generally taken in measuring of tunnel convergence and crown. The purpose of this study is, as using of industrial photogrammetry system which is supplying more accuracy and speedy in the measure of tunnel convergence and crown. From the result of this study, we have got up to 1/20,000 accuracy and totally 6 minutes, from picturing 5 sections by one person to data edition, has been taken except setting targets.

• Journal of Information Technology Services
• /
• v.14 no.3
• /
• pp.85-97
• /
• 2015

The information and communications construction business has the characteristics of an infrastructure industry and responsibility for the construction and maintenance of all ICT infrastructures. With the recent proliferation of the smart convergence of various industries based on ICT infrastructure, the role of the information and communications construction business has been highlighted to accommodate the convergence and implementation environment in construction and medical industries. Therefore, this paper seeks policy measures to establish the new role of the information and communications business under the rapidly developing smart convergence environment and the priorities of policy measures to strengthen the capability of the information and communications business using a quantitative model. The analysis result suggests that the difference in importance of each policy measure should be considered in order to execute effectively the policy of promoting the information and communications construction business. Given the constraint of limited budget, policy priorities include the development of new markets, and establishment of incentive for new technology. This study is significant for its theoretical contribution, being the first quantitative approach to policy priorities for the promotion of information and communications construction business under the smart convertgence environment.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.7
• /
• pp.19-25
• /
• 2014

In the LED lighting applications, because LED packages are the origin of heat generation, there are thermal design problem on heat sinks. In the thermal design, it is important to consider the total volume and the total weight of heat sink simultaneously. In this study, an Al 6063 heat sink was optimized using Computational Fluid Dynamics(CFD) simulation tool for the cooling of 30W LED module, and then the cooling performance and the total weight of heat sinks with Al 6063 and Thermal Conductive Polycarbonate(TCP) were compared under the same conditions. As the result of simulation, an Al 6063 heat sink was optimized with 22 ea. of fins and 1.6 mm of fin thickness. LED Junction Temperature of the TCP Heat Sink was $5.6^{\circ}C$ higher, but total weight of it was 47 % less than the Al 6063.

• Journal of Welding and Joining
• /
• v.34 no.4
• /
• pp.17-22
• /
• 2016

In this study, we compared the physical and chemical properties evaluation for each size in the SUS316L metal powder produced by water atomization and gas atomization. and we analyzed the experimental data in order to find the basis of a suitable metal powder (SUS316L) for DED (Direct Energy Deposition) processing. Also it evaluated the properties of each layered surface and cross section according to the number of deposition and deposition speed. In the result of optical microscopy measurements, the metal powder by water atomization was the crack generated between the deposition layer, the deposition layer was poor quality. However, metal powder by gas atomization was obtained a relatively good deposition results than metal powder by water atomization.

• Design & Manufacturing
• /
• v.13 no.3
• /
• pp.48-52
• /
• 2019

As the consumer market in the mold, automation and aerospace industries grows, the demand for chemical machining using on electrochemical polishing increases. To enhance the surface roughness and gloss of the micro-needle, we have studied for an electrochemical polishing. Electrochemical polishing requires the chemical reaction of solution and material according to the electrolyte and electrode. In this study, sulfuric acid(30%), phosphoric acid(50%), and DI-water(20%)were used as the electrolytic solution, and the electrolytic solution temperature used $58^{\circ}C$. Electrochemical polishing was carried out in experimental conditions, and the micro-needle experiment was carried out from the basic experiment to obtain the experimental conditions. Experimental results show that as the voltage and current increase, the surface roughness improved and the gloss is improved. So, the best result for this experiment was obtained in condition 6, which improved micro-needle.

• Journal of Convergence for Information Technology
• /
• v.9 no.12
• /
• pp.252-263
• /
• 2019

This study attempted to apply flip-learning and to evaluate college students' awareness and academic achievements. Twenty-seven students in single-group dental hygiene were applied to the dental radiology class for four weeks. Data collection was done after the flipped-learning and collected data were analyzed using frequency, average and content analysis using SPSS 18.0. As a result, awareness of overall class was a positive response, and academic achievement evaluation was not statistically significant. It was found to be an effective educational program. However, the academic achievement evaluation was not statistically significant and it was considered that the evaluation system needs to be different according to the learning method.