• 산업경영시스템학회지
• /
• 제44권2호
• /
• pp.132-139
• /
• 2021

The purpose of this study is to investigate the effect of organizational safety and health management activities on safety and health performance by using the results of safety activity level evaluation of public organizations. To this end, a research model was established by using three fields as independent variables among the four areas of the safety activity level evaluation index: safety and health system, safety and health activity plan, and safety and health activity level, and the safety and health activity performance field as a dependent variable. Correlation analysis and regression analysis between major variables were performed. As a result of the correlation analysis, the safety and health activity performance had a significant positive (+) correlation with all of the safety and health system, safety and health activity plan, and safety and health activity level. The safety and health system had a significant positive (+) correlation with the safety and health activity plan and safety and health activity level, and the safety and health activity plan had a significant positive (+) correlation with the safety and health activity level. And as a result of the regression analysis, it was found that the organization's safety and health system, safety and health activity plan, and safety and health activity level all had a significant positive (+) effect on safety and health activity performance.

• 반도체디스플레이기술학회지
• /
• 제21권4호
• /
• pp.81-85
• /
• 2022

Mist-CVD is known to have advantages of low cost and high productivity method since the precursor solution is misting with an ultrasonic generator and reacted on the substrate under vacuum-free conditions of atmospheric pressure. However, since the deposition distribution is not uniform, various efforts have been made to derive optimal conditions by changing the angle of the substrate and the position of the outlet to improve the result of the preceding study. Therefore, in this study, a deposition distribution uniformity model was derived through the shape and position of the substrate support and the conditions of inlet flow rate using the particle tracking method of computational fluid dynamics (CFD). The results of analysis were compared with the previous studies through experiment. It was confirmed that the rate of deposition area was improved from 38.7% to 100%, and the rate of deposition uniformity was 79.07% which was higher than the predicted result of simulation. Particle tracking method can reduce trial and error in experiments and can be considered as a reliable prediction method.

• ETRI Journal
• /
• 제37권2호
• /
• pp.212-221
• /
• 2015

As the amount of re-sequencing genome data grows, minimizing the execution time of an analysis is required. For this purpose, recent computing systems have been adopting both high-performance coprocessors and host processors. However, there are few applications that efficiently utilize these heterogeneous computing resources. This problem equally refers to the work of single nucleotide polymorphism (SNP) detection, which is one of the bottlenecks in genome data processing. In this paper, we propose a method for speeding up an SNP detection by enhancing the utilization of heterogeneous computing resources often used in recent high-performance computing systems. Through the measurement of workload in the detection procedure, we divide the SNP detection into several task groups suitable for each computing resource. These task groups are scheduled using a window overlapping method. As a result, we improved upon the speedup achieved by previous open source applications by a magnitude of 10.

• 한국융합학회논문지
• /
• 제6권1호
• /
• pp.93-101
• /
• 2015

철도차량에서의 축은 안전한 운행을 하기 위해서는 중요한 역할을 함으로서 그 강도 및 내충격성, 재질, 안전계수, 응력 및 변형이 고려되어야 한다. 본 연구에서는 Model 1과 Model 2의 시뮬레이션 모델들이 있다. 이 모델들은 CATIA와 ANSYS로 설계, 구조 및 피로 해석을 통한 융합 기술을 수행함으로서 연구된다. Model A의 최대 변형량과 최대 등가응력이 Model B보다 더 작음으로서 Model A가 Model B보다 내구성을 더 가지고 있다. 본 연구 결과를 철도 차량의 부품 설계에 응용함으로서 파손을 방지하기 위한 내구성이 고찰될 수 있다. 그리고 디자인 면에서의 융합 기술로의 접목도 가능하여 미적인 감각을 나타낼 수 있다.

• 대한산업공학회지
• /
• 제41권3호
• /
• pp.305-323
• /
• 2015

Since various R&D projects about technology convergence was conducted by the government of Korea, the lack of liaisons among the projects has been accepted as serious issues related on the duplicated funding. In this article, we propose a research framework to analyze the relationship among national R&D projects about technology convergence. In detail, the projects have been sorted and categorized with the data collected from National Science and Technology Information Service (NTIS) in order to analyze the current state of national R&D projects. The linkages among projects are then established using the results of analysis on national R&D projects. Finally, the relationship maps have been developed. It is expected that the result could be applied to identify the relations among projects and handle problems on the duplicated funding.

• 한국산업융합학회 논문집
• /
• 제23권2_2호
• /
• pp.361-374
• /
• 2020

Recently, small and medium-sized rahmen-type bridges have been developed as a technology that ensures the stability of structural behavior and the safety of use at the same time by using efficient and economical materials that make up the convergence section of reinforced bar, structural steel and concrete. This study is about a rahmen-type structure applied with the installation and dismantling of the strut. It improves the serviceability of the structure by forming multi-points and efficiently applies the convergence section of structural steel and concrete materials to the structural system changes to induce the displacement improvement effect additionally. By constructing mock-up models for the beam-column joint, the displacement was calculated and compared, and this was compared and analyzed by numerical analysis. The final displacement showed an improvement effect of 13.46% to 36.28% based on the vertical displacement of the existing structure without struts through the experiment of the mock-up models. As a result of analysis by numerical analysis method, the displacement improvement effect of 42.89% could be derived.

• 한국산업융합학회 논문집
• /
• 제23권2_2호
• /
• pp.289-299
• /
• 2020

The composition of convergence cross-section of the material is a technique that provides reasonable design and construction of structures. It is frequently used in medium-sized bridges and architectural structures. However, the structural behavioral spare capacity enhancement of the structure by the application of the convergence cross-section is still limited by the expandability due to the limiting state of each material. In order to overcome these limitations, this study reasonably analyzed the construction stages before and after the convergence cross-section constructed and developed a technique for forming multi-point boundary conditions using struts, which are compression members. Based on the existing cases, a reasonable construction step for forming the material composite section of the entire structural system of the structure was derived, and a numerical analysis model for a specific part was constructed to analyze the behavior of the strut application. As a result of this study, the effect of reducing the sectional force of 7.40% in beam-column joint and 6.31% in the center of girder was derived, and the deflection, which is a measure of the serviceability of the structure, improved by 54.41% from the installation and dismantling of strut members at each construction stage.

• 지식경영연구
• /
• 제10권2호
• /
• pp.15-33
• /
• 2009

Telecommunications-broadcasting convergence in the domain of IT is a representative phenomenon that is expected to provide the saturated existing markets with a new source of profit. Especially, T-Commerce combines familiarity of TV and immediacy of the Internet which are expected to cover all the users familiar with each media and expand the existing commercial transactions. Telecommunications-broadcasting convergence in Korea, however, is focusing on technical and regulatory aspects so that research on the real users is not up to the mark yet. This is the most fundamental problem in hampering growth in the corresponding service and market. Thus, we are proposing an adoption model on T-Commerce to rapidly expand the convergence service through understanding the potential users. Perceived utilitarian and hedonic values, perceived interactivity, media substitution and personal innovativeness have been examined as the factors influencing the users' intention to adopt a new convergence service. As a result of empirical analysis, it is verified that perceived utilitarian and hedonic values and personal innovativeness directly influenced the users' intention to adopt whereas perceived interactivity had indirect affect on them. T-Commerce service providers should not only emphasize on the benefit that the older media could not provide the users with, but also provide them with more pleasure and entertaining experience during the course of satisfying the users' needs to distinguish T-Commerce from the other existing media.

• Carbon letters
• /
• 제14권4호
• /
• pp.251-254
• /
• 2013

In this study, poly(amic acid) was prepared via a polycondensation reaction of 3,3'-dihydroxybenzidine and pyromellitic dianhydride in an N-methyl-2-pyrrolidone solution; reduced graphene oxide/polybenzoxazole (r-GO/PBO) composite films, which significantly increased the electrical conductivity, were successfully fabricated. GO was prepared from graphite using Brodie's method. The GO was used as nanofillers for the preparation of r-GO/PBO composites through an in situ polymerization. The addition of 50 wt% GO led to a significant increase in the electrical conductivity of the composite films by more than sixteen orders of magnitude compared with that of pure PBO films as a result of the electrical percolation networks in the r-GO during the thermal treatment at various temperatures within the films.

• 공학교육연구
• /
• 제23권4호
• /
• pp.3-13
• /
• 2020

The purpose of this study is to analyze the differences in the perception and education requirements between industry and engineering students on engineering convergence competency, and to suggest implications for fostering engineers suitable to industry demand and direction of focus improvement in the current engineering education field. To this end, 73 industrial representatives and 104 engineering students are surveyed the engineering convergence competency and educational needs. The results of this analysis are as follows: first, the difference in engineering convergence competency by background variable was significantly different in gender of engineering students. Second, it is found that there is a significant difference between the current level and the required level of engineering convergence competency from an industry perspective. In the IPA results, it shows that new knowledge generation and future-oriented vision skills are urgently needed to be improved. And it is showed that the creative thinking, knowledge utilization, communication, and cooperation capabilities skills need to be maintained continuously. Third, as a result of the analysis of the differences in recognition of the current competency levels between industry and engineering students, there is statistically significant differences in systemic thinking, communication and cooperation, understanding of other academic fields, humanities, and future-oriented perspectives. Therefore, it is necessary to specific plans and efforts to reduce this perception gap should be prepared at the university.