• Biomedical Science Letters
• /
• v.1 no.1
• /
• pp.19-25
• /
• 1995

Characterization of immune cell subpopulations in the bovine was performed using a direct immunofluorescence technique adaptable for routine and repeated monitoring. This whole blood procedure is faster and requires less volume than conventional density gradient isolation methods. Low inter-and intra-animal variations were seen in hematology parameters and in CD4, CD8 and CD2 lymphocyte subtypes. CD4 values were 30% of lymphocytes in male and 32% in females. Thriteen percent were CD8 in males and 13% in females. CD4: CD8 ratios were approximately two in both sexes. Fiffty three percent were CD2 in males and 54% in females. The mean RBC counts of peripheral blood were 7.20$\times10^6/{mm}^3$ for male cattle and 6.36$\times10^6/{mm}^3$ for females. The mean WBC counts were 8.09$\times10^3/{mm}^3$ for males and 7.09$\times10^3/{mm}^3$ for females. The percent of lymphocytes(63-65%) was higher than the percent of neutrophils(17-18%), the percent of eosinophils(11-15%), te percent of monocytes(4-5%), and percent of basophiles(1%).

• The Korean Journal of Pain
• /
• v.13 no.2
• /
• pp.149-155
• /
• 2000

Background: Pulsed radiofrequency (RF) lesioning is a painless procedure and causes no neurodestruction and neuritis-like reaction are common following conventional RF lesioning. There is little data about the effect of pulsed RF especially with regard to its suitability for the treatment of acute pain. The possibility of a placebo effect cannot be ruled out because a double-blind study was not performed in previous studies. There is also no neuropathologic study about pulsed RF. Methods: The rats were anesthetized with sodium pentobarbital (40 mg/kg, i.p.; supplemented as necessary). The common sciatic nerve was exposed by blunt dissection through biceps femoris. Pulsed RF was administered to the common sciatic nerve using a 30 ms/s pulse with for 120 seconds. The temperature reached was no more than $42^{\circ}C$. Analgesia was determined using hot-plate assay shortly and, 3 days and 1 week before, and 2 weeks after operation. Lesions were examined with LM (light microscope) and EM (electron microscope) 2 weeks later. Results: There were no differences in response latencies between the control and experimental group. There were many vacuoles with hyaline bodies in the Schwann cell cytoplasm rather than axon in LM and larger electron dense bodies. No changes were found in the axon or unmyelinated fibers. Only small changes were found in the sheaths of myelinated fibers and Schwann cells. Conclusions: We therefore do think that any analgesic effect of pulsed RF is not a result of block of neural conduction. But rather than it can be attributed to others factors. It was also ineffective as a treatment for acute pain such as that caused by the hot-plate test.

• International Journal of Highway Engineering
• /
• v.9 no.1 s.31
• /
• pp.57-67
• /
• 2007

Many researches have recently discussed about the film thickness as a good substitute or supplement for VMA or other volumetric criteria in the design procedure. Some researchers have not only proposed the specific number for the recommended film thickness, but also introduced the new calculation procedures or concepts. Each model (index model and the virtual model) has its own advantages and disadvantages in terms of the ability to account for the volumetric properties of the mixture. In this paper, the modified virtual model was proposed to combine advantages from both models. However, it cannot be disregarded the way to determine the appropriate particle shape factors for different sources and sizes of aggregates. In order to evaluate the different calculation methods, mixtures with two aggregate sources and eight gradations were designed based on the dominant aggregate size range (DASR) porosity concept. Superpave indirect tensile test (IDT) and asphalt pavement analyzer (AEA) test were used to describe the performance of mixtures. Test results indicated that the virtual model, which is the same to the modified virtual model for sphere 1:1 case, is better than the conventional standard model to define the range of the film thickness to have better performance of asphalt mixtures.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.4 no.2
• /
• pp.95-102
• /
• 2002

Spatial interpolation has become a common procedure in converting temperature forecasts and observations at irregular points for use in regional scale ecosystem modeling and the model based decision support systems for resource management. Neglection of terrain effects in most spatial interpolations for short term temperatures may cause erroneous results in mountainous regions, where the observation network hardly covers full features of the complicated terrain. A spatial interpolation model for daytime hourly temperature was formulated based on error analysis of unsampled site with respect to the site topography. The model has a solar irradiance correction scheme in addition to the common backbone of the lapse rate - corrected inverse distance weighting. The solar irradiance scheme calculates the direct, diffuse and reflected components of shortwave radiation over any surfaces based on the sun-slope geometry and compares the sum with that over a reference surface. The deviation from the reference radiation is used to calculate the temperature correction term by an empirical conversion formula between the solar energy and the air temperature on any sloped surfaces at an hourly time scale, which can be prepared seasonally for each land cover type. When this model was applied to a 14 km by 22 km mountainous region at a 10 m horizontal resolution, the estimated hourly temperature surfaces showed a better agreement with the observed distribution than those by a conventional method.

• Korean Journal of Oriental Medicine
• /
• v.18 no.2
• /
• pp.1-16
• /
• 2012

Objectives : The 10th Conference of the Parties to the Convention on Biological Diversity (COP 10) was held in Nagoya, Japan in October 2010, during which an international convention on access to genetic resources and conventional knowledge and sharing of benefits thereof was adopted. The Oriental Medicine field uses medicinal herbs based on genetic resources, as well as traditional knowledge about genetic resources. As such, if Korea, China and Japan compete over the ownership of such traditional knowledge, it will almost certainly trigger disputes over the payment of royalties among other problems. Notably, since the traditional medicine industry is closely related with China, it is highly likely this will adversely affect Korea's production of medicines using natural materials, including Korean herbal doctors' prescription, formulation and preparation of medicinal herbs. Methods : This study also analyzed the recent situation in Japan, which is the chair nation of the Nagoya Protocol and a member nation like Korea. It analyzed the Japanese people's awareness of the Nagoya Protocol and its strategies in the two years since its adoption, as well as the Guidelines for Genetic Resources, which were newly revised in 2012. Conclusions : The Nagoya Protocol requires the preparation of legislative and administrative measures and policies in order to pave the way for sharing the benefits deriving from the use of genetic resources and the relevant traditional knowledge with the providers of such resources. Thus, corresponding domestic legal measures need to be taken. Such measures include the refining of the procedure of accessing genetic resources, the designation of liaison offices, a competent agency and a supervisory agency, and the building of a system designed to issue internationally acknowledged certificates. It is also important to operate related professional consulting offices, as is the case in Japan. In addition, in the case of genetic resources, there is a need to seek multinational and bilateral cooperation including free trade agreements. Regarding traditional knowledge about genetic resources, measures need to be prepared to enable the three East Asian countries, namely, Korea, China and Japan, to commonly use ancient literature on Oriental medicine and to claim exclusive rights to such intellectual properties. Notably, with China now moving to expand the scope of traditional knowledge through the WIPO, Korea needs to prepare response measures.

• The KIPS Transactions:PartD
• /
• v.8D no.4
• /
• pp.313-326
• /
• 2001

The XML that was proposed as a next-generation standard for describing Web documents is widely used in various Web-based applications. In addition, XML documents on the Web link each other by hyperlinks. The current works on XML focus on the XML storage system that can efficiently store, manage, and retrieve XML documents. However, the research on the query language that supports the XML links and on the XML retrieval systems to process the XML links, is little conducted until now. In this paper, we propose an extension of an XML query language for expressing the XML link query and its processing scheme. A link query is to retrieve contents from an XML document (a query document) and from the XML documents (referenced documents) that are referred to by the links in the query document. As far as retrieving from the referenced documents is concerned, the current practice is to manually generate queries to get the partial results, and to repeat such a procedure. The purpose of link query processing in this paper is to eliminate the manual work altogether in getting the complete query result. The performance analysis shows that our link query processing strategy outperforms the conventional approach including the manual tasks. The more links to the referenced documents and the more referenced documents there are in the site storing the query document, the more query processing time decreases.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.2
• /
• pp.175-183
• /
• 2016

The endurance reliability assessment of a highly complex mechanism is generally predicted by the fatigue life based on simple stress analysis. This study discusses various fatigue life assessment techniques for an automobile clutch snap ring. Finite element analyses were conducted to determine the structural stress on the snap ring. Structural stress that is insensitive in regards to the mesh size and type definition is presented in this study. The structural stress definition is consistent with elementary structural mechanics theory and provides an effective measure of a stress state that pertains to fatigue behavior of welded joints in the form of both membrane and bending components. Numerical procedures for both solid models and shell or plate element models are presented to demonstrate the mesh-size insensitivity when extracting the structural stress parameters. Conventional finite element models can be used with the structural stress calculations as a post-processing procedure. The two major implications from this research were: (a) structural stresses pertaining to fatigue behavior can be consistently calculated in a mesh-insensitive manner regardless of the types of finite element models; and (b) by comparing with the clutch snap-ring fatigue test data, we should predict the fatigue fractures of an automobile clutch snap ring using this method.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.4
• /
• pp.238-246
• /
• 2005

Rice yield and protein content have been shown to be highly variable across paddy fields. In order to characterize this spatial variability of rice within a field, two-year experiments were conducted in 2002 and 2003 in a large-scale rice field of $6,600m^2$ In year 2004, an experiment was conducted to know if variable rate treatment (VRT) of N fertilizer, that was prescribed for site-specific management at panicle initiation stage, could reduce spatial variation in yield and protein content of rice while increasing yield compared to conventional uniform N topdressing (UN, 33kg N/ha at PIS) method. VRT nitrogen prescription for each grid was calculated based on the nitrogen (N) uptake (from panicle initiation to harvest) required for target rice protein content of $6.8\%$, natural soil N supply, and recovery of top-dressed N fertilizer. The required N uptake for target rice protein content was calculated from the equations to predict rice yield and protein content from plant growth parameters at panicle initiation stage (PIS) and N uptake from PIS to harvest. This model· equations were developed from the data obtained from the previous two-year experiments. The plant growth parameters for the calculation of the required N were predicted non-destructively by canopy reflectance measurement. Soil N supply for each grid was obtained from the experiment of year 2003, and N recovery was assumed to be $60\%$ according to the previous reports. The prescribed VRT N ranged from 0 to 110kg N/ha with an average of 57kg/ha that was higher than 33 kg/ha of UN. The results showed that VRT application successfully worked not only to reduce spatial variability of rice yield and protein content but also to increase rough rice yield by 960kg/ha. The coefficient of variation (CV) for rice yield and protein content was reduced significantly to $8.1\%$ and $7.1\%$ in VRT from $14.6\%$ and $13.0\%$ in UN, respectively. And also the average protein content of milled rice in VRT showed very similar value of target protein content of $6.8\%$. In conclusion the procedure used in this paper was believed to be reliable and promising method for reducing within-field spatial variability of rice yield and protein content. However, inexpensive, reliable, and fast estimation methods of natural N supply and plant growth and nutrition status should be prepared before this method could be practically used for site-specific crop management in large-scale rice field.

• Journal of Biomedical Engineering Research
• /
• v.19 no.6
• /
• pp.571-575
• /
• 1998

One of the most significant features of diagnostic ultrasonic instruments is to provide real time information of the soft tissues movements. Echocardiogram has been widely used for diagnosis of heart diseases since it is able to show real time images of heart valves and walls. However, the currently used ultrasonic images are deteriorated due to presence of speckle noises and image dropout. Therefore, it is very important to develop a new technique which can enhance ultrasonic images. In this study, a technique which extracts enhanced binary images in echocardiograms was proposed. For this purpose, a digital moving image file was made from analog echocardiogram, then it was stored as 8-bit gray-level for each frame. For an efficient image processing, the region containing the heat septum and tricuspid valve was selected as the region of interest(ROI). Image enhancement filters and morphology filters were used to reduce speckle noises in the images. The proposed procedure in this paper resulted in binary images with enhanced contour compared to those form the conventional threshold technique and original image processing technique which can be further implemented for the quantitative analysis of the left ventricular wall motion in echocardiogram by easy detection of the heart wall contours.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.2
• /
• pp.469-475
• /
• 2010

The railway signalling system plays an essential role in the safe and efficient train operation as serving control functions of train operation intervals and train routes. The reliability and safety of the system are very important because the failure of the railway signalling system can lead to train collision or derailment as well as train operation stop. Until now, in railway signalling system the conventional wayside signal mode has been used generally. There are, however, the risk of accidents such as human mistakes caused by that the driver identifies the signal lamp status and controls train speed with the naked eye. It is also necessary to refurbish the obsolete system. Thereby, It is being effective that the onboard signal mode has been recently introduced and applied in order to transmit the speed control information to train by using the computer and communication equipment. It is necessary to switch over the system in a way while providing passengers with an operation service to replace the obsolete signal system. In this paper, we verify the cases through trial assessment which are solved by the way of adding specific functionalities in the problems of interference among the procedure of switch-over processes and a serial of processes for system verification while a train is operated in the new system in parallel to the existing system.