• Ocean Systems Engineering
• /
• v.7 no.2
• /
• pp.143-155
• /
• 2017

For complex flexible structures such as nets, the determination of drag forces and its deformation is a challenging task. The accurate prediction of loads on cages is one of the key steps in designing fish farm facilities. The basic physics with a simple cage, can be addressed by the use of experimental studies. However, to design more complex cage system for various environmental conditions, a reliable numerical simulation tool is essential. In this work, the current load on a cage is calculated using a Morison-force model applied at instantaneous positions of equivalent-net modeling. Variations of solidity ratio ($S_n$) of the net and current speed are considered. An equivalent array of cylinders is built to represent the physical netting. Based on the systematic comparisons between the published experimental data for Raschel nets and the current numerical simulations, carried out using the commercial software OrcaFlex, a new formulation for $C_d$ values, used in the equivalent-net model, is presented. The similar approach can also be applied to other netting materials following the same procedure. In case of high solidity ratio and current speed, the hybrid model defines $C_d$ as a function of Re (Reynolds number) and $S_n$ to better represent the corresponding weak diffraction effects. Otherwise, the conventional $C_d$ values depending only on Re can be used with including shielding effects for downstream elements. This new methodology significantly improves the agreement between numerical and experimental data.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.9
• /
• pp.1562-1570
• /
• 2003

The prediction of the inelastic behavior of the structure is an essential part of reliability assessment procedure, because most of the failures are induced by the inelastic deformation, such as creep and plastic deformation. During decades, there has been much progress in understanding of the inelastic behavior of the materials and a lot of inelastic constitutive equations have been developed. The complexity of these constitutive equations generally requires a stable and accurate numerical method. The radial return mapping is one of the most robust integration scheme currently used. Nonlinear kinematic hardening model of Armstrong-Fredrick type has recovery term and the direction of kinematic hardening increment is not parallel to that of plastic strain increment. In this case, The conventional radial return mapping method cannot be applied directly. In this investigation, we expanded the radial return mapping method to consider the nonlinear kinematic hardening model and implemented this integration scheme into ABAQUS by means of UMAT subroutine. The solution of the non-linear system of algebraic equations arising from time discretization with the generalized midpoint rule is determined using Newton method and bisection method. Using dynamic yield condition derived from linearization of flow rule, the integration scheme for elastoplastic and viscoplastic constitutive model was unified. Several numerical examples are considered to demonstrate the efficiency and applicability of the present method.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.5
• /
• pp.457-464
• /
• 2009

The weak classifier of AdaBoost algorithm is a central classification element that uses a single criterion separating positive and negative learning candidates. Finding the best criterion to separate two feature distributions influences learning capacity of the algorithm. A common way to classify the distributions is to use the mean value of the features. However, positive and negative distributions of Haar-like feature as an image descriptor are hard to classify by a single threshold. The poor classification ability of the single threshold also increases the number of boosting operations, and finally results in a poor classifier. This paper proposes a weak classifier that uses multiple criterions by adding a probabilistic criterion of the positive candidate distribution with the conventional mean classifier: the positive distribution has low variation and the values are closer to the mean while the negative distribution has large variation and values are widely spread. The difference in the variance for the positive and negative distributions is used as an additional criterion. In the learning procedure, we use a new classifier that provides a better classifier between them by selective switching between the mean and standard deviation. We call this new type of combined classifier the "Mixed Weak Classifier". The proposed weak classifier is more robust than the mean classifier alone and decreases the number of boosting operations to be converged.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.5
• /
• pp.16-24
• /
• 2007

Wireless mesh network extends the limited coverage of conventional wireless service from one-hop access point to wider area. It is recognized as an important issue to provide seamless handoff in the wide coverage of wireless mesh network. A long handoff delay may cause high packet loss and disconnection of service, degrading the network performance. The handoff delay is mainly introduced from the channel scanning process obtaining information to make handoff decision and the unnecessary handoffs due to inaccurate handoff decision. In this paper, we propose the handoff algorithm based on one-way trip time (OTT) to expedite the handoff procedure. As compared to the handoff algorithm based on the receiving signal power, the proposed algorithm takes advantage of OTT to obtain the necessary handoff information in a relatively shorter time and reduce the unnecessary handoffs. The performance of proposed algorithm is evaluated through the simulations. It is verified that the proposed handoff algorithm can effectively enhance the handoff accuracy, and therefore reduce the handoff delay and unnecessary handoffs.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.6 no.1
• /
• pp.88-97
• /
• 1996

The metallization is the key to determining cell costs, cell performance, and system reliability. Screen printing technology suffers from several limitations affecting mainly the front grid. The buried contact solar cell (BCSC) was specifically desinged to be compatible with low cost, mass production techniques and avoid the conventional metallization problem. By using electroless plating technique, we performed this metallization inexpensively and reliably. This paper presents the details of the optimization procedure of metallization schemes on laser grooved cell surfaces. Commercially available Ni, Cu and Ag plating solutions were applied for the cell metallization. The application of those solutions on the buried contact front metallization has resulted in an cell efficiency of 18.8%. The cell parameters are an open circuit voltage of 651 mV, short circuit current density of 37.1 mA/$\textrm{cm}^2$, and fill factor of 77.8 %. The efficiency of over 18 % was achieved in the above 90% of the batch.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.15 no.2
• /
• pp.1-9
• /
• 2011

An optimal design method for a structural control system considering load variations due to their uncertain characteristics is studied in this paper. The conventional design problem for a control system generally deals with the optimization problem of a structural control system and interaction between the structure and the control device. This study deals with the optimization problem of a load-structure-control system and the more complicated interactions with each other. The problem of finding the load that maximizes the structural responses and the structural control system that minimizes the responses simultaneously is formulated as the min-max problem. In order to effectively obtain the optimal design variables, a co-evolutionary algorithm is adopted and, as a result, an optimal design procedure for the linear structural control system with uncertain dynamic characteristics is proposed. The example design and simulated results of an earthquake excited structure validates the proposed method.

• Computational Structural Engineering
• /
• v.9 no.2
• /
• pp.103-113
• /
• 1996

This paper presents practical notional-load plastic-hinge method for a two-dimensional steel structure design. The proposed method incorporates the refined plastic-hinge concept for spread of plasticity together with a practical notional-load approach. The proposed method can assess realistically both strength and behavior of a structural system and its individual members in a direct manner. As a result, the method can be used for design without tedious separate member capacity checks, including the calculation of K-factor. The strengths predicted by the proposed method are then compared with those predicted by the exact plastic-zone analysis as well as by the conventional LRFD procedure. A good agreement is generally observed. The displacement predictions are compared with the plastic-zone solutions. Analysis and design guidelines in using the proporsed method are given in detail. Analysis and design procedures are recommended. Member sizes determined by the proposed method are compared with those determined by the LRFD method. It is concluded that the procedures are suitable for adoption in practice.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.1
• /
• pp.113-124
• /
• 2008

Distributed operation of overall structural design process, by which product optimization and process parallelization are simultaneously implemented, is presented in this paper. The database-interacted hybrid method, which selectively takes the accustomed procedure of the conventional method in the framework of the optimal design, is utilized here. The staged application of design constraints reduces the computational burden for large complex optimization problems. Two kinds of numeric and graphic processes are simultaneously implemented by concurrent engineering approach in the distributed environment of PC networks. The former is based on finite element optimization method and the latter is represented by AutoCAD using AutoLISP programming language. Numerical computation and database interaction on servers and graphic works on independent clients are communicated through message passing. The numerical experiments for some steel truss models show the validity and usability of the method. This study has sufficient adaptability and expandability, in that it is based on general methodologies and industry standard platforms.

• Clinical and Experimental Reproductive Medicine
• /
• v.21 no.3
• /
• pp.247-252
• /
• 1994

Intracytoplasmic sperm injection(ICSI) was known as effective method in treatments of couples who unable to be helped by conventional in vitro fertilization. In 78 treatment cycles of 78 infertile couples using ICSI performed at our infertility clinic between May and August 1994 were analyzed. These patients were classified two groups, andrological factor(AF) and non-andrological factor(non-AF) group. The AF group, which had abnormal sperm physiology, included oligozoospermia, asthenozoospermia, oligoasthenoteratozoospermia(OATS) and microsurgical epididymal sperm aspiration(MESA) patients. The non-AF group, which had abnormal oocyte physiology, included abnormal zona pellucida, poor quality of oocyte and immune factor infertile patients. A single spermatozoon was injected into the ooplasm of 776 metaphase II oocytes. The fertilization rate was 44.6%(346/776) and 319 embryos were transferred. After 73 embryo transfers(93.6% of treatment cycles) 23 pregnancies were estabilshed, i. e. pregnancy rate of 29.4% per started cycle and 31.5% per embryo transfer. Fertilization rate of AF and non-AF group was 46.2% and 35.8%, pregnancy rate was 34.5%(20/58) and 20.0%(3/15), respectively. In order to increase the pregnancy rate, assisted hatching(AHA) has done after lCSl in 47 treatment cycles. Pregnancy rate of ICSI with AHA and without AHA group was 34. 0% (16/47) and 26.9%(7/26), respectively. ICSI was more effective in andrological factor infertility and the pregnancy rate was increased by ICSI with AHA procedure.

• Clinical and Experimental Reproductive Medicine
• /
• v.21 no.3
• /
• pp.267-272
• /
• 1994

We studied the role of assisted fertilization(subzonal insemination, intracytoplasmic sperm injection) in enhancing fertilization and pregnancy rate in obstructive azoospermia. MESA was performed in the patients with congenital absence of the vas deferens and unreconstructable obstructive azoospermia. Sperm were aspirated microsurgically from various sites along the epididymal stump. Sperm were then washed on a mini-PercoH gradient or swim-up method and treated by 2-deoxyadenosine and pentoxifylline. Conventional IVF(group I, 14 cycles), SUZI(group II, 13 cycles) and ICSI(gruop III, 28 cycles) were carried out in 55 treatment cycles. The clinical results are as follows: 1. Fertilization rates for group I, II and III were 16.1 %,31.4% and 48.6%, retrospectively (p<0.05). 2. Clinical pregnancy rates for group I, II and III were 7.1 %,7.7%, and 32.1 'Yo, retrospectively. 3. In 5 of MESA-ICSI cycles, epididymal sperm from alloplastic spermatocele were used and 2 clinical pregnancies (40%) were obtained. According to our results the combined MESA-ICSI procedure is highly effcient in improving fertilization and pregnancy rate in congenital absence of the vas deferens and unreconstructable obstructive azoospermia.