• 제목/요약/키워드: conventional extraction

검색결과 975건 처리시간 0.029초

Sustainable water extraction of anthocyanins in aronia (Aronia melanocarpa L.) using conventional and ultrasonic-assisted method

  • Jang, Youngbin;Koh, Eunmi
    • 한국식품과학회지
    • /
    • 제53권5호
    • /
    • pp.527-534
    • /
    • 2021
  • The demand for sustainable extraction of bioactive compounds from food matrices has been increasing. Water extraction of anthocyanins in aronia was investigated using conventional and ultrasonic-assisted methods. The optimum extraction conditions for the conventional method included a sample-to-water ratio of 1:40 g/mL, extraction temperature 71℃, and extraction time of 39 min. The optimized conditions for ultrasonic-assisted extraction were a sample-to-water ratio of 1:40 g/mL, extraction temperature 80℃, extraction time of 20 min, and an amplitude of 87.2 ㎛. The anthocyanin contents of the two extracts were 155.32 and 158.02 mg/100 g fresh weight, respectively. The major anthocyanins were cyanidin 3-galactoside (65% of the total) and cyanidin 3-arabinoside (30% of the total). The contents of individual anthocyanins and phenolic acids were not significantly different between the two optimized extracts.

Microwave Energy를 이용한 오염토양에서 Phenol의 추출 (Extraction of Phenol from the Contaminated Soil Using Microwave Energy)

  • 이기환;이태호;김윤아
    • 한국환경과학회지
    • /
    • 제12권4호
    • /
    • pp.447-459
    • /
    • 2003
  • This study was carried out to develop an efficient process far the elimination of phenol pollutant from soils. An microwave-assisted process (MAP) and a conventional Soxhlet extraction method (SEM) were employed to extract phenol from two types of soils. The effects of extraction methods, aged time of the spiked soil samples, extraction solvent and extraction time on the extraction performance were compared. Our results demonstrate that the recoveries from standard soil spiked were at least 10% higher fer MAP than these f3r the conventional Soxhlet. The extraction time by MAP requires significantly shelter time (1 min) than 15 h of the conventional Soxhlet. The recoveries from non-contaminated soil spiked with phenol were also almost identical f3r above results. The reduction of the extraction times with efficiency higher than that afforded by the conventional Soxhlet technique supports the suitability of the MAP method.

바이오매스로부터 파클리탁셀 회수를 위한 전통적 용매 추출, 마이크로웨이브를 이용한 추출, 초음파를 이용한 추출 방법 비교 (Comparison of Conventional Solvent Extraction, Microwave-Assisted Extraction, and Ultrasound-Assisted Extraction Methods for Paclitaxel Recovery from Biomass)

  • 김진현
    • Korean Chemical Engineering Research
    • /
    • 제58권2호
    • /
    • pp.273-279
    • /
    • 2020
  • 본 연구에서는 바이오매스로부터 파클리탁셀 회수를 위한 전통적 용매 추출(conventional solvent extraction, CSE), 마이크로웨이브를 이용한 추출(microwave-assisted extraction, MAE), 초음파를 이용한 추출(ultrasound-assisted extraction, UAE) 방법을 비교하였다. 추출 용매 종류(아세톤, 클로로포름, 에탄올, 메탄올, 메틸렌 클로라이드)에 따른 영향을 조사한 결과, 메탄올이 모든 추출 방법에서 가장 적합하였다. 메탄올을 이용한 MAE와 UAE의 경우, 단 1회의 추출로 대부분의 파클리탁셀 회수(>95%)가 가능하였다. 또한 MAE와 UAE의 경우 추출 온도(25-45 ℃), 마이크로웨이브 파워(50-150 W), 초음파 파워(180-380 W)의 증가에 따라 파클리탁셀 회수율이 증가하였다. 또한 SEM 분석을 통해 바이오매스 표면을 조사한 결과, 표면 구조가 CSE의 경우에는 조금 주름진 형태를 보인 반면 MAE와 UAE의 경우에는 강한 충격으로 매우 거칠고 파괴된 형태를 보였다.

초음파 조사에 의한 토양내 중금속 추출 기작 연구 (Mechanism on Extraction of Heavy Metals from Soil by Ultrasonication)

  • 신연준;이차돌;유종찬;양중석;김호섭;백기태
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제20권1호
    • /
    • pp.28-35
    • /
    • 2015
  • In this study, the mechanisms on ultrasonication enhanced metals extraction were investigated compared with the conventional washing technique. We hypothesized the mechanisms on enhanced extraction of ultrasonication: ultrasonication increased the temperature of soil slurry and decreased average particle size of soil due to breakdown of soil aggregate. Actually, the ultrasonication increased the temperature of soil slurry to $60^{\circ}C$ in this study, and the increase in the temperature enhanced the metal extraction to 15-20% even in the conventional simple mixing. The conventional washing technique decreased average size of soil particles because of breakdown of soil aggregate, and the ultrasonication decreased the size more than that of washing. The breakdown of soil aggregate improved the contact between metals and washing agent, which enhanced the extraction of metals in the ultrasonication. Therefore, we concluded that the main mechanisms of ultrasonication are increase in the temperature and breakdown of the soil aggregate. Finally, the ultrasonicaiton increased the extractability of metals upto 40% compared to conventional washing technique.

A Direction-Based Vascular Pattern Extraction Algorithm for Hand Vascular Pattern Verification

  • Im, Sang-Kyun;Choi, Hwan-Soo;Kim, Soo-Won
    • ETRI Journal
    • /
    • 제25권2호
    • /
    • pp.101-108
    • /
    • 2003
  • This paper proposes an improved vascular pattern extraction algorithm for person verification applications. The proposed direction-based vascular pattern extraction (DBVPE) algorithm is based on the directional information of vascular patterns. It applies two different filters to the input images: row vascular pattern extraction filter (RVPEF) for effective extraction of the abscissa vascular patterns and column vascular pattern extraction filter (CVPEF) for effective extraction of the ordinate vascular patterns. We use the combined output of both filters to obtain the final hand vascular patterns. Unlike the conventional hand vascular pattern extraction algorithm, the directional extraction approach prevents loss of the vascular pattern connectivity. To validate the DBVPE algorithm, we used a prototype system with a DSP processor. The prototype system shows approximately a three-times better false acceptance rate (FAR) than the conventional single filter algorithm.

  • PDF

가변 분할을 적용한 유한 요소법에 의한 3차원 모형의 효율적인 커패시턴스 추출 방법 (An Efficient Three-Dimensional Capacitance Extraction Based on finite Element Method Adopting Variable Division)

  • 김정학;김준희;김석윤
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제52권3호
    • /
    • pp.116-122
    • /
    • 2003
  • This paper proposes an efficient method for computing the 3-dimensional capacitance of complex structures. The proposed method Is based on Finite Element Method(FEM) and expands the conventional FEM by adopting variable division. This method improves the extraction efficiency 50 times when compared to the conventional FEM with equal division. The proposed method can be used efficiently to extract electrical parameters of on/off-chip interconnects in VLSI systems.

Application of the Microwave-assisted Process to the Fast Extraction of Isoflavone from the Waste Residue of the Soybeans

  • Hua, Li;Guoqin, Hu;Dan, Li
    • Bulletin of the Korean Chemical Society
    • /
    • 제30권11호
    • /
    • pp.2687-2690
    • /
    • 2009
  • Due to the importance of isoflavone content in soybean extracts, the microwave-assisted process (MAP) was compared to the conventional extraction methods. For comparison of the three methods, all extraction parameters (solvent, sample to solvent ratio, temperature, etc.) were kept the same; the microwave extractor was operated at 187.5 W with an emission frequency of 2450 MHz under atmospheric pressure conditions and the extractions were carried out at 75 ${^{\circ}C}$ for 3 min while the conventional reflux was at 75 ${^{\circ}C}$ for 3 h. Total yield and crude isoflavone content were determined by ultraviolet spectrophotometric and compared with the three methods. Results indicated that the MAP was comparable to the conventional method in its capability to extract target compounds without causing any degradation; in addition it dramatically reduced the extraction time from 3 h to a few minutes, suggesting that it can be an alternative technique to the time-consuming conventional reflux method.

홍화색소의 일반추출과 셀룰라아제추출의 비교연구 (Comparison Studies between Conventional Hot Water and Cellulase Extraction for Safflower Dyestuff)

  • 신인수;홍경옥;오태광
    • 대한가정학회지
    • /
    • 제39권4호
    • /
    • pp.49-59
    • /
    • 2001
  • Natural red and yellow dyestuff was extracted from safflower (Carthamus tinctorius Linnaeus) by a new process of cellulase extraction compared with the conventional hot water extraction. Dyestuffs were extracted from safflower easily and repeatedly by means of cellulose as safflower cell wall destroyer. It means that new dyestuff extraction by cellulase improves not only yields of dyestuff from safflower successfully but also the rate of repetition of extraction. From the above experiments, the conclusions of this study were summarized as follows. 1. The optimum conditions of dyestuff extraction from safflower by general extraction method were that the solvent was the water of pH 6.0 on yellow dyestuff and 3% $K_2CO_3$ solution on red dyestuff, extraction temperature was $55^{\circ}C$, and extraction time was 30 min. 2. Among various cellulase, the NOVO cellulase was the best cell wall destroyer of safflower and finally produced the largest amount of dyestuff from safflower by cellulase extraction method. 3. The optimum conditions of dyestuff extraction by cellulase extraction method were conducted on 10 unit of cellulase per gram of safflower at $100m{\ell}$ water of pH 5.0 at $50^{\circ}C$ for 30 min.

  • PDF

해수로부터 용존 윤기물의 Solid Phase Extraction을 위한 다수 시료 처리 장치 (Multisample Extraction system for Solid Phase Extraction of Dissolved Organic Compounds from Sea Water)

  • 조기웅;정경화;신종헌;김석현;홍기훈
    • 한국해양환경ㆍ에너지학회지
    • /
    • 제3권3호
    • /
    • pp.34-40
    • /
    • 2000
  • 지용성 용존 유기물을 해수로부터 효율적으로 추출할 수 있는 고체상 추출 (solid phase extraction)장치를 새로이 고안하였다. 본 장치는 octadecyl silane (ODS) cartridge와 압력 평형 마개, 96 multifolder, 아스피레타 형 진공 펌프로 구성하였다. 본 장치는 기존의 액체-액체 추출법보다 회수 효율은 1.4 배 이상 증대시켰으며, 최소 시료량을 8 배 이상 감소 시켰다. 따라서 용매의 사용을 5 배 이상 감소시킬 수가 있으므로 나중에 사용된 용매를 제거하는 노력도 크게 감소시켰다. 뿐만 아니라 96 개의 시료(각 1ℓ)를 동시에 처리할 수 있으므로 지용성 용존 유기물의 추출 과정을 반자동화시킨 획기적인 장치이다. 본 장치를 통하여 황해 해수 시료에서 추출된 용존 탄화수소의 정성 및 정량 분석 결과 본 장치가 효율성과 신뢰성에서 기존의 액체-액체 추출법을 대체할 수 있을 것으로 사료된다.

  • PDF

개선된 세포 외곽선 추출 알고리즘의 병렬화 (Improved Parallelization of Cell Contour Extraction Algorithm)

  • 유숙현;조우현;권희용
    • 한국멀티미디어학회논문지
    • /
    • 제20권5호
    • /
    • pp.740-747
    • /
    • 2017
  • A fast cell contour extraction method using CUDA parallel processing technique is presented. The cell contour extraction is one of important processes to analyze cell information in pathology. However, conventional sequential contour extraction methods are slow for a huge high-resolution medical image, so they are not adequate to use in the field. We developed a parallel morphology operation algorithm to extract cell contour more quickly. The algorithm can create an inner contour and fail to extract the contour from the concave part of the cell. We solved these problems by subdividing the contour extraction process into four steps: morphology operation, labeling, positioning and contour extraction. Experimental results show that the proposed method is four times faster than the conventional one.