• The Korean Journal of Emergency Medical Services
• /
• v.21 no.3
• /
• pp.7-16
• /
• 2017

Purpose: The purpose of the study was to investigate the effects of laryngeal mask airway (LMA) insertion from different positions, using different methods, on the quality of the insertion, for identifying a more convenient and effective insertion method. Methods: In a model ambulance, 30 paramedic students performed the LMA insertion procedure, in four different settings, combinations of the rescuer's position (at the head end of the patient, at the side of the patient), and insertion technique (index finger insertion, thumb insertion), in a randomized order. Quality of insertion index and convenience of use were measured. Results: The quality of insertion index (tidal volume, gastric insufflation, airway pressure, airway sealing pressure, midline positions, insertion success grade, and insertion time) were not significantly different among four different settings. However LMA insertion from the anterior (head) end, using the index finger method compared to the thumb method was found to be significantly more convenient. Conclusion: We recommend using the more convenient and familiar LMA insertion method, between index finger insertion and thumb insertion, regardless of rescuer's position.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.6
• /
• pp.1643-1648
• /
• 2010

Adenosine 5'-phosphonates have been reported as potential chain terminators against Hepatitis C virus (HCV); therefore, we developed convenient sequences for synthesis of modified adenosine 5'-phosphonates in which the hydroxyl group at 2' or 3'-position of the sugar moiety is substituted with the azido or amino group and the oxymethyl group at the 4'-position is modified by the ethylene or vinyl group. This synthetic sequence can provide six adenosine 5'-phosphonates via one protocol, and is considered to be very efficient and a convenient route of synthesis. An assay of adenosine 5'-phosphonate analogues (1, 2, 3, 4, 5, and 6) against HCV infection is now in progress.

• The Journal of Korea Robotics Society
• /
• v.2 no.1
• /
• pp.40-47
• /
• 2007

Recently, with the development of service robots and with the new concept of ubiquitous world, the position estimation of mobile objects has been raised to an important problem. As pre-liminary research results, some of the localization schemes are introduced, which provide the absolute location of the moving objects subjected to large errors. To implement a precise and convenient localization system, a new absolute position estimation method for a mobile robot in indoor environment is proposed in this paper. Design and implementation of the localization system comes from the usage of active beacon systems (based upon RFID technology). The active beacon system is composed of an RFID receiver and an ultra-sonic transmitter: 1. The RFID receiver gets the synchronization signal from the mobile robot and 2. The ultra-sonic transmitter sends out the traveling signal to be used for measuring the distance. Position of a mobile robot in a three dimensional space can be calculated basically from the distance information from three beacons and the absolute position information of the beacons themselves. Since it is not easy to install the beacons at a specific position precisely, there exists a large localization error and the installation time takes long. To overcome these problems, and provide a precise and convenient localization system, a new auto calibration algorithm is developed in this paper. Also the extended Kalman filter has been adopted for improving the localization accuracy during the mobile robot navigation. The localization accuracy improvement through the proposed auto calibration algorithm and the extended Kalman filter has been demonstrated by the real experiments.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.28 no.1
• /
• pp.39-44
• /
• 1992

Analog PID controllers have been designed to make good use of position control in industries. Recently, the importance of digital position control is emphasized for the requirements of controller which are not only to control the objects but to include various aspects such as easiness of design and implementation, simple exchange of control program and convenient communications of data between various controllers and a host computer. This study proposes a combined control method which is mixed the vaiable structure control (VSC) with the PI control for minimum time position control of DC servo motor by microcomputer. The results of test by this method show offset-free and minimum time optimal position control which is not affected by the disturbance and the system parameter variations. The validity of the proposed method comparing with the conventional PID control is proved by the response experiments.

• Journal of the Korean Institute of Navigation
• /
• v.24 no.4
• /
• pp.219-226
• /
• 2000

Ship's position data obtaining method is one of the very important factor in navigation. Nowadays, GPS(Global Positioning System) using the earth orbiting satellites are equipped and operated for the position finding. Because it provides more precise position information than other equipments and is very convenient for navigator. In this study, it is designed to develop the GPS simulator for everybody being able to practise the GPS operating skill like as navigation planning, navigation calculating etc. And also, it can be operated with personal computer without real GPS receiver. This simulation system is based on the real GPS receiver and built by the visual basic 5.0 program. And it displays the ship's position and navigating information and plots the ship's moving track on the screen in real time according as initial setup data-main engine's rpm, rudder angle, departure position and waypoint.

• Clinics in Shoulder and Elbow
• /
• v.7 no.1
• /
• pp.51-55
• /
• 2004

Arthroscopic surgery of the shoulder is regarded as a convenient and safe approach, but there is a possibility of complication during procedure. We report an isolated unilateral hypoglossal neurapraxia following combined arthroscopic and open Bankart reconstruction performed in beach-chair position under general anesthesia with orotracheal intubation.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.1088-1094
• /
• 1993

One of the important restraint conditions for determination of rotary tiller parameters is whether the outside of front cutting surface on blade in rotary tiller pushes untilled soil in operation. By theoretical analysis and graphic verification on computer, no sil-push conditions is put forward and formula for calculating the position angle of its bent line derived, as is convenient for selection of rotary tiller parameters and design and drawing of its blade.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.12
• /
• pp.133-142
• /
• 1999

We introduce the algorithms of 2-D and 3-D position estimation using 2-D vision sensors. The sensors used in this research issue red laser slit light to the body. So, it is very convenient to obtain the coordinates of corner point or edge in sensor coordinate. Since the measured points are normally not fixed in the body coordinate, the additional conditions, that corner lines or edges are straight and fixed in the body coordinate, are used to find out the position and orientation of the body. In the case of 2-D motional body, we can find the solution analytically. But in the case of 3-D motional body, linearization technique and least mean squares method are used because of hard nonlinearity.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1998.10b
• /
• pp.65-73
• /
• 1998

Ship's positino data obtaining method is ine of the very important factor innavigation . Nowadays, GPS(Global Positioning System) using the earth orbiting satellites are equipped and operated for the position finding. Because it provides more precise position information than other equipments and is very convenient for navigator. In this study, it is designed to develop the GPS simulator for everybody being able to proactise the GPS operating skill like as navigation planning, navigation calculating etc. And also, it can be operated with personal computer without real GPS receiver. This simulation system is based on the real GPS receiver system and built by the visual basic 5.0 program. And it displays the ship's position and navigating information and plots the ship's moving track on the screen in real time according as initial setup data-main engine's rpm, rudder angle, depature position and waypoint.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.848-851
• /
• 2002

Recently, there are lots of concerning on the integration of robot and virtual reality with the trends of the research of intelligent robot and mined reality. In this paper, a 3D GUI system is proposed based on Internet for remote controlling and monitoring of agent robot working for itself. The proposed system is consists of a manager ordering a new position and displaying the motion of robot, an agent robot moving to the destination according to the indication, a positioning module detecting the current position of robot, and a geographical information module. A user can order the robot agent move to a new position in a virtual space and watch the real images captured from the real sites of the robot. Then, the agent robot moves to the position automatically with avoiding collision by using range finding and a path detection algorithm. We demonstrate the proposed 3D GUI system is supporting a more convenient remote control means far the robots.