• Journal of Environmental Health Sciences
• /
• v.47 no.5
• /
• pp.432-445
• /
• 2021

Background: The European Centre for Ecotoxicology and Toxicology of Chemicals' Targeted Risk Assessment (ECETOC TRA) tool has been recognized by EU REACH as a preferred approach for calculating worker health risks from chemicals. Objectives: The applicability of the ECETOC TRA to occupational exposure estimation from industrial uses of methanol was studied by inputting surveyed and varied parameters for TRA estimation as well as through comparison with measured data. Methods: Information on uses of methanol was collected from seven working environment monitoring reports along with the measured exposure data. Input parameters for TRA estimation such as operating conditions (OCs), risk management measures (RMMs) and process categories (PROCs) were surveyed. To compare with measured exposures, parameters from the surveyed conditions of ventilation but no use of respiratory protection were applied. Results: PROCs 4, 5, 8a, 10, and 15 were assigned to ten uses of methanol. The uses include as a solvent for manufacturing sun cream, surfactants, dyestuffs, films and adhesives. Methanol was also used as a component in a release agent, hardening media and mold wash for cast products as well as a component of hard-coating solution and a viscosity-controlling agent for manufacturing glass lenses. PROC 8a and PROC 10 of a cast product manufacturer without LEV (local exhaust ventilation) and general ventilation as well as no respiratory protection resulted in the highest exposure to methanol. Assuming the identical worst OCs and RMMs for all uses, exposures from PROC 5, 8a, and 10 were the same and the highest followed by PROC 4 and 15. The estimation resulted in higher exposures in nine uses except one use where measured exposure approximated exposures without RMMs. Conclusions: The role of ECETOC TRA as a conservative exposure assessment tool was confirmed by comparison with measured data. Moreover, it can guide which RMMs should be applied for the safe use of methanol.

• Composites Research
• /
• v.34 no.5
• /
• pp.290-295
• /
• 2021

The application of lightweight structural composites to automobiles as a solution in line with global fuel economy regulations to curb global warming is recognized as a megatrend. This study was conducted to provide a technical approach that can respond to the issue of replacing parts that require conductive properties to maximize the application of thermoplastic carbon fiber reinforced plastics (CFRPs), which are advantageous in terms of repair, disposal and recycling. By utilizing the properties of the low-viscosity polymerizable oligomer matrix, it was possible to prepare a thermoplastic CFRP exhibiting excellent impregnation properties while uniformly mixing the conductive filler. Various carbon-based conductive fillers such as carbon black, carbon nanotubes, graphene nanoplatelets, graphite, and pitch-based carbon fibers were filled up to the maximum content, and electrical and thermal conductive properties of the fabricated composites were compared and studied. It was confirmed that the maximum incorporation of filler was the most important factor to control the conductive properties of the composites rather than the type or shape of the conductive carbon filler. Experimental results were observed in which it might be advantageous to apply a one-dimensional conductive carbon filler to improve electrical conductivity, whereas it might be advantageous to apply a two-dimensional conductive carbon filler to improve thermal conductivity. The results of this study can provide potential insight into the optimization of structural design for controlling the conductive properties of thermoplastic CFRPs.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.256-259
• /
• 2016

The growth of mobile devices in Internet of Things (IoT) leads to a number of intelligent buildings related IoT applications. For instance, home automation controlling system uses client system such web apps on smartphone or web service to access the home server by sending control commands. The home server receives the command, then controls for instance the light system. The gateway based RESTful technology responsible for handling clients' requests attests an internet latency in case a large number of clients' requests submit toward the gateway increases. In this paper, we propose the design tasks of the IoT gateway for handling concurrency events. In the procedure of designing tasks, concurrency is best understood by employing multiple levels of abstraction. The way that is eminently to accomplish concurrency is to build an object-oriented environment with support for messages passing between concurrent objects. We also investigate the performance of event-driven architecture for building IoT gateway using node.js on one side and communication protocol based message-oriented middleware known as XMPP to handle communications of intelligent building control devices connected to the gateway through a centralized hub. The Node.JS is 40% faster than the traditional web server side features thread-based approach. The use of Node.js server-side handles a large number of clients' requests, then therefore, reduces delay in performing predefined actions automatically in intelligent building IoT environment.

• Journal of the HCI Society of Korea
• /
• v.14 no.2
• /
• pp.49-60
• /
• 2019

With the appearance of self-driving cars and electric cars, the automobile industry is rapidly changing. In the midst of these changes, HMI studies are becoming more important as to how the driver obtains safety and convenience with controlling the vehicle. This study sought to understand how automobile manufacturers understand the driving situation, and how they define and limit driver interaction. For this, prior studies about HMI were reviewed and 15 participants performed an on-road study to drive vehicles from five manufacturers with using their interfaces. The results of the study confirmed that buttons and switches that are easily controlled by the user while driving were different from manufacturer to manufacturer. And there are some buttons that are more intensively controlled and others that are difficult to control while driving. It was able to derive 'selection and concentration' from Audi's vehicle, 'optimization of the driving ' from BMW's, 'simple and minimize' from Benz's vehicle, 'remove the manual distraction' from the vehicle of Lexus, and 'visual stability' from KIA's vehicle as the distinctive keywords for the HMI. This shows that each manufacturer has a different definition and interpretation of the driver's driving control area. This study has a distinct value in that it has identified the characteristics of vehicle-specific HMI in actual driving conditions, which is not apparent in appearance. It is expected that this research approach can be useful to see differences in interaction through actual driving despite changes in driving environment such as vehicle platooning and self-driving technology.

• (The)Study of the Eastern Classic
• /
• no.73
• /
• pp.281-302
• /
• 2018

The role of mind is very important in Xunzi's thought. The way is permanent rule of politics that is under the control of mind which is recognizing organ for both thinking and acknowledging things in his thought. Nevertheless the mind in Xunzi's thought has desire as an organ of body to be controlled. On the other hand, the mind has conflicting two fold aspects in the course of its recognition of things like storage and vacancy, movement and calmness, and two kinds of recognizing opinion against one object. And there are various evils in thinking system of mind. In a sense, the mind of human is to be cleaned and cultivated. Xunzi proposed managing energy and cultivating mind as a thinking system. Mengzi proposed to enliven vast-flowing energy and to cultivate mind through shortening desire, while Xunzi did managing energy and caring about mind for controlling other body systems and publicly recognizing things. In Xunzi's idea the mind in the recognition of things is similar to the water in bowl as a mirror for looking at any things, and thus it is imperative for us to sink grounds in mind for becoming good water mirror. In this need the grounds of human mind would be to be sunk and also the cultivation of it would be to be demanded. Ultimately there should need the recognition of mind that is cleaned and cultivated for brightly discovering the great principle and recovering the unchangeable way with a view to preparing the condition for national peace. This thesis, in this context, to approach the meaning of mind, its two fold aspects, and the necessity of it.

• Journal of the Society of Disaster Information
• /
• v.19 no.3
• /
• pp.673-688
• /
• 2023

Purpose: Fires that occur during construction are infrequent, but cause great damage. Recently, with the growth of the logistics and distribution industry, the number of construction sites for new logistics warehouses is increasing, so it was selected as a research subject and research was conducted to reduce accidents at construction sites through the development of a fire risk assessment tool to quantitatively approach fire prevention. Method: A comprehensive fire risk assessment tool was accumulated by classifying the work in progress, classifying combustibles and ignition sources by grade, excluding air (oxygen), which is difficult to control, and additionally substituting evacuation safety. Result: Using the developed and proposed fire risk evaluation tool, excavation work with low fire risk, facility construction with medium fire risk, and finishing work with high fire risk were sampled to derive the result (CGI). Conclusion: In this study, it was possible to establish specific preventive measures and evaluate evacuation safety by controlling physical conditions (combustibles) and energy conditions (ignition sources) according to the risk assessment by developing a tool that can evaluate the risk of 14fire occurrence at construction sites. It is expected that in the future, through the application of the fire risk evaluation tool at construction sites, it will be provided as a criterion for establishing a process plan that can reduce risk and evaluating the adaptability of firefighting equipment.14

• Journal of the Korea Society for Simulation
• /
• v.18 no.3
• /
• pp.13-21
• /
• 2009

The sensor nodes that form a wireless sensor network must perform both routing and sensing roles, since each sensor node always has a regular energy drain. The majority of sensors being used in wireless sensor networks are either unmanned or operated in environments that make them difficult for humans to approach. Furthermore, since many wireless sensor networks contain large numbers of sensors, thus requiring the sensor nodes to be small in size and cheap in price, the amount of power that can be supplied to the nodes and their data processing capacity are both limited. In this paper, we proposes the WSN(Wireless Sensor Network) algorithm which is applied sensor node that has low power consumption and efficiency measurement. Moreover, the efficiency routing protocol is proposed in this paper. The proposed algorithm reduces power consumption of sensor node data communication. It has not researched in LEACH(Low-Energy Adaptive Clustering Hierarchy) routing protocol. As controlling the active/sleep mode based on the measured data by sensor node, the energy consumption is able to be managed. In the event, the data is transferred to the local cluster head already set. The other side, this algorithm send the data as dependent on the information such as initial and present energy, and the number of rounds that are transformed into cluster header and then transferred. In this situation, the assignment of each node to cluster head evenly is very important. We selected cluster head efficiently and uniformly distributed the energy to each cluster node through the proposed algorithm. Consequently, this caused the extension of the WSN life time.

• 한국노년학
• /
• v.31 no.4
• /
• pp.939-967
• /
• 2011

This study observed elderly women's adaptation process on separation by death in rural areas through grounded theory approach and developed its entity theory. Participants for this study were 14 elderly women who have lost their husbands in the last 12 months. The study was conducted for 8 months starting January 2010. Each interview per session took 40 to 90 minutes, study notes were taken on site, and recorded contents were transcribed by the researcher which was myself. The research data were collected by in-depth interview and with help of local community's nurses who were in charge of taking care of the participants. The collected data were analyzed by applying Strauss & Corbin's grounded theory (1998). As a result of study, 80 concepts, 28 subcategories, and 12 categories were deducted during open coding process. Adaptation process on separation by death was process of 'finding a way to live alone' which used strategy of 'attempting a make changes in life', and 'embracing the situation' which were influenced by conciliatory conditions of 'degree on economic condition', 'change in health', and 'supporting system' which focuses on phenomenon of 'bearing life alone' which is influenced by context condition of 'marital chemistry of couples during lifetime', and 'the couple's leadership during lifetime' together with casual conditions of 'the fall of wall'. The adaptation process accordance to time flow were divided into 4 steps which were step of 'shock and release of emotions', step of 'longing and resentment', step of 'resignation and acceptance', and step of 'life's restructure'. Above results suggest right directions for welfare for the aged and process of 'finding a way to live alone' for participants by controlling several factors and using intervention strategy, and provided basic data required for developing and applying practical welfare mediation.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.267-267
• /
• 2022

Glutinous rice is a key grain quality trait occupying an important part during rice processing in most rice growing areas. Amylose content (AC) of rice determine eating quality which is one of the major traits in rice breeding program. In this study, a gene pyramiding approach was used to introduce two dull genes, responsible for low amylose contents, for glutinous rice breeding using marker assisted selection (MAS). Two dull genes were located on chromosome 6 (wx-mq, AC: 12.7 %) and chromosome 10 (du1, AC: 10.3%), respectively. To test whether these two dull genes have an epistatic interaction, we developed an F₂ population by crossing two nearly isogenic lines(NILs) harboring wx-mq and du1. Gene based marker and KASP marker were used to select NILs(NIL-nor, NIL-wxmq, NIL-du1, and NIL-wxmq/du1) from the F2 population. A two-way ANOVA revealed an epistatic interaction between the two genes in the F2 population. The mean of Amylose contents for NIL-nor, NIL-wxwq, NIL-(du1, and NIL-wxmq/du1 were 17.3%, 12.5%, 9.7%, and 7.2%, respectively. This interaction was confirmed by an analysis of NILs indicating that both genes are involved in the same genetic mechanism controlling amylose contents. This result will be useful for rice breeding related to amylose content.

• Journal of the Korean Institute of Gas
• /
• v.27 no.3
• /
• pp.59-71
• /
• 2023

Carbon capture, and storage (CCS) is important for the reduction of greenhouse gases and achieving carbon neutrality. CCS focuses on storing captured CO₂ permanently in underground reservoirs. CO₂-enhanced oil recovery (CO₂-EOR) is one form of CCS, where CO₂ is injected into the underground to enhance oil recovery. CO₂-EOR not only aids in the extraction of residual oil but also contributes to carbon neutrality by storing CO₂ underground continuously. CO₂-EOR can be classified into miscible and immiscible methods, with the CO₂-water alternating gas (CO₂-WAG) technique being a representative approach within the miscible method. In CO₂-WAG, water and CO₂ are alternately injected into the reservoir, enabling oil production and CO₂ storage. The WAG method allows for controlling the breakthrough of injection fluids, providing advantages in oil recovery. It also induces hysteresis in relative permeability during the injection and production process, expanding the amount of trapped CO₂. In this study, the effects of enhancing oil recovery and storing CO₂ underground during CO₂-EOR were presented. Additionally, cases of CO₂-EOR application in relation to CCS were introduced.