• Journal of Life Science
• /
• v.17 no.1 s.81
• /
• pp.1-5
• /
• 2007

The Precesses for leaf development in dicotyledonous plants are surprisingly complex, while the mechanism of controlling and coordinating them is poorly understood. To characterize the fundamental features of the leaf development of Arabidopsis, we first attempted to isolate mutants that alter leaf morphology. Here, leaf morphological mutant of Arabidopsis, lanceolatal (lan1) which has small and narrow leaves have isolated and characterized. To clarify the function of LAN1 in organ development, we characterized lan1-7 mutant using an anatomical and genetic approach. The lan1-7 mutant had reduced size of foliage leaves and reduced dimensions of stems. A reduction both in cell size and in cell number was evident at the cellular level in the lan1 mutant, revealing that LAN1 gene appears to affect cell division at an earlier stage and cell elongation throughout the development of leaf primordia. from the analysis of heterogeneous plant with lan1 mutation and 35S-AG transgenic plant, AG gene is revealed to regulate leaf morphology under the control of 35S promoter. Thus, MADS-box gene was revealed to have some relationship to that of LAN1 gene at certain stage in leaf development processes.

• Journal of the Korean Society of Combustion
• /
• v.20 no.4
• /
• pp.34-41
• /
• 2015

Oxy-methane nonpremixed flames diluted with $CO_2$ were investigated to clarify impact of radiation heat loss and chemical effects of additional $CO_2$ to oxidizer stream on flame extinction. Flame stability maps were presented with functional dependencies of critical diluents mole fraction upon global strain rate at several oxidizer stream temperatures in $CH_4-O_2/N_2$, $CH_4-O_2/CO_2$, and $CH_4-O_2/CO_2/N_2$ counterflow flames. The effects of radiation heat loss on the critical diluent mole fractions for flame extinction are not significant even at low strain rate in nonpremixed $CH_4-O_2/N_2$ diffusion flame, whereas those are significant at low strain rate and are negligible at high strain rate (> $200s^{-1}$) in $CH_4-O_2/CO_2$ and $CH_4-O_2/CO_2/N_2$ counterflow flames. Chemical effects of additional $CO_2$ to oxidizer stream on the flame extinction curves were appreciable in both $CH_4-O_2/CO_2$ and $CH_4-O_2/CO_2/N_2$ flames. A scaling analysis based on asymptotic solution of stretched flame extinction was applied. A specific radical index, which could reflect the OH population in main reaction zone via controlling the mixture composition in the oxidizer stream, was identified to quantify the chemical kinetic contribution to flame extinction. A good correlation of predicted extinction limits to those calculated numerically were obtained via the ratio between radical indices and oxidizer Lewis numbers for the target and baseline flames. This offered an effective approach to estimate extinction strain rate of nonpremixed oxy-methane flames permitting air infiltration when the baseline flame was taken to nonpremixed $CH_4-O_2/N_2$ flame.

• Journal of the Korea Concrete Institute
• /
• v.24 no.2
• /
• pp.111-120
• /
• 2012

This paper is a report about lap splice performance of rebar embedded in the strain-hardening cement-based composites (SHCCs) under monotonic and repeated tension loading. Ten mix proportions of cement-based composites such as SHCCs and normal concrete were investigated. The study parameters are comprised of (1) types of reinforcing fibers (polyethylene and steel fiber), (2) replacement levels of expansive admixture (EXA, 0% and 10%), and (3) compressive strength (30 and 100 MPa) of cement-based composites. Lap splice lengths (ld) of rebars in SHCC materials and normal concrete were 60% and 100% of splice length calculated by code requirements for structural concrete, respectively. Test results indicated that SHCCs materials can lead to enhancements in the lap splice performance of embedded rebar. All of the fiber reinforcement conditions (PE-SHCC and PESF-SHCC) considered in this study produced considerable improvements in the tensile strength, cracking behavior, and bond strength of lap-spliced rebar. Furthermore, adding EXA to SHCC matrix improved the tensile lap splice performance of rebar in SHCC materials. However, for controlling crack behavior, the performance of PE-SHCC was better than that of PESF-SHCC due to its mechanical properties. This study demonstrated an effective approach for reducing required development length of lap spliced rebar by using SHCC materials.

• Journal of the Korean Data and Information Science Society
• /
• v.26 no.6
• /
• pp.1317-1325
• /
• 2015

There are two types of clinical research to figure out risk factor for disease using collected data. One is prospective study to approach the subjects from the present time and the other is retrospective study to find the risk factor using the subject's information in the past. Both approached and study design are different but the purpose of the two studies is to identify a significant difference between two groups and to find out what the variables to influence groups. Especially when comparing the two groups in clinical research, we have to look at the difference between the impact clinical variables by group while controlling the influence of the baseline characteristics variables such as age and sex. However, in the retrospective study, the difference of baseline characteristic variables can occur more frequently because the past records did not randomly assign subjects into two groups. In clinical data analysis use covariates to solve this problem. Typically, the analysis method using the analysis of covariance of variance, adjusted model, and propensity score matching method. This study is introduce the way of equality adjustment between groups data analysis using covariates in retrospective clinical studies and apply it to the recurrence of gastric cancer data.

• Clean Technology
• /
• v.20 no.4
• /
• pp.398-405
• /
• 2014

In the treatment of spent high energetic materials, the issues such as environmental pollution, safety as well as working capacity should be carefully considered and well examined. In this regard, incineration has been recommended as one of the most promising processes for the disposal of such explosives. Due to the fact that high energetic materials encompass various types and their different characteristics, the technology development dealing with various materials is not an easy task. In this study, rigorous modeling and dynamic simulation was carried out to predict dynamic physico-chemical phenomena for research department explosive (RDX). Plug flow reactor was employed to describe the incinerator with 263 elementary reactions and 43 chemical species. Simulation results showed that safe operations can be achieved mainly by controlling the reactor temperature. At 1,200 K, only thermal decomposition (combustion) occurred, whereas increasing temperature to 1,300 K, caused the reaction rates to increase drastically, which led to ignition. The temperature further increased to 3,000 K which was the maximum temperature recorded for the entire process. Case studies for different operating temperatures were also executed and it was concluded that the modeling approach and simulation results will serve as a basis for the effective design and operation of RDX incinerator.

• Journal of agricultural medicine and community health
• /
• v.38 no.1
• /
• pp.39-48
• /
• 2013

Objectives: This research was done to identify relationships among job stress, fatigue, job satisfaction, and commitment to organization in customized home health care nurses. Methods: Research participants were 130 nurses who worked in the customized home health care of 20 county in Gyeongnam province. Data collection for this descriptive correlational study was done at August 2010 using self report questionnaires, and analyzed using descriptive statistics, t-test, ANOVA, and we analyzed a four step approach in which several regression analyses were conducted and significance of the coefficients is examined at each step. Results: The results from step 1 showed that, the effect of each job stress was significantly related to job satisfaction. In step 2, the direct effect of commitment to organization on job satisfactions were all significant too. Step 3 analysis showed that the total effect of each job stress on commitment to organization symptoms was significant. Step 4 showed the results of controlling for mediating factor (job satisfaction): job demand and insecurity were significantly associated with commitment to organization(p<0.001), the finding supports that others were fully mediated by each job satisfaction, and, the job demand and insecurity were partially mediated by job satisfaction. Conclusion: Results of this research indicated that job stress in customized home health care nurses was the principal variable affecting job satisfaction and commitment to organization. Appropriate stress management strategies based on assessment of job demand and job security for these nurses lead to development of improved commitment to organization.

• Korean Journal of Environmental Agriculture
• /
• v.30 no.3
• /
• pp.268-274
• /
• 2011

BACKGROUND: A large scale of sediment load delivered from watershed causes substantial waterway damages and water quality degradation. Controlling sediment loading requires the knowledge of the soil erosion and sedimentation. The various factors such as watershed size, slope, climate, land use may affect sediment delivery processes. Traditionally sediment delivery ratio prediction equations have been developed by relating watershed characteristics to measured sediment yield divided by predicted gross erosion. However, sediment prediction equations have been developed for only a few regions because of limited sediment data. Besides, little research has been done on the prediction of sediment delivery ratio for asia monsoon period in mountainous watershed. METHODS AND RESULTS: In this study Tank model was expanded and applied for estimating sediment yield to Oship River of east coast. The rainfall-runoff in 2006 was verified using the Tank model and we derived good result between observed and calculated discharge in 2009 at the same conditions. In relation to sediment yield, the sediment delivery rate of 2006 was very high than 2009 regardless of methods for estimating sediment load. It was thought to be affected by heavy rainfall due to the typhoon. CONCLUSION(s): For estimating sediment volume from watershed, long-term monitoring data on discharge and sediment is needed. This model will be able to apply to predict discharge and sediment yield simultaneously in ungauged area. This approach is more effective and less expensive method than the traditional method which needs a lot of data collection.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.3
• /
• pp.471-479
• /
• 2018

Recently, the spread of smart TV based Android iOS Set Top box has become common. This paper propose a new approach to control the TV using gestures away from the era of controlling the TV using remote control. In this paper, the AdaBoost algorithm is applied to gesture recognition by using a mono camera. First, we use Camshift-based Body tracking and estimation algorithm based on Gaussian background removal for body coordinate extraction. Using global and local feature vectors, we recognized gestures with speed change. By tracking the time interval trajectories of hand and wrist, the AdaBoost algorithm with CART algorithm is used to train and classify gestures. The principal component feature vector with high classification success rate is searched using CART algorithm. As a result, 24 optimal feature vectors were found, which showed lower error rate (3.73%) and higher accuracy rate (95.17%) than the existing algorithm.

• Journal of Veterinary Clinics
• /
• v.33 no.2
• /
• pp.107-112
• /
• 2016

The objective of this study was to determine potential contributing factors associated with biosecurity level of farrow-to-finish pig farms and to develop a classification tree model to explore how these factors related to each other based on prediction model. To this end, the author analyzed data (n = 193) extracted from a cross-sectional study of 344 farrow-to-finish farms which was conducted between March and September 2014 aimed to explore swine disease status at farm level. Standardized questionnaires with information about basic demographical data and management practices were collected in each farm by on-site visit of trained veterinarians. For the classification of the data sets regarding biosecurity level as a dependent variable and predictor variables, Chi-squared Automatic Interaction Detection (CHAID) algorithm was applied for modeling classification tree. The statistics of misclassification risk was used to evaluate the fitness of the model in terms of prediction results. Categorical multivariate input data (40 variables) was used to construct a classification tree, and the target variable was biosecurity level dichotomized into low versus high. In general, the level of biosecurity was lower in the majority of farms studied, mainly due to the limited implementation of on-farm basic biosecurity measures aimed at controlling the potential introduction and transmission of swine diseases. The CHAID model illustrated the relative importance of significant predictors in explaining the level of biosecurity; maintenance of medical records of treatment and vaccination, use of dedicated clothing to enter the farm, installing fence surrounding the farm perimeter, and periodic monitoring of the herd using written biosecurity plan in place. The misclassification risk estimate of the prediction model was 0.145 with the standard error of 0.025, indicating that 85.5% of the cases could be classified correctly by using the decision rule based on the current tree. Although CHAID approach could provide detailed information and insight about interactions among factors associated with biosecurity level, further evaluation of potential bias intervened in the course of data collection should be included in future studies. In addition, there is still need to validate findings through the external dataset with larger sample size to improve the external validity of the current model.

• Korea journal of population studies
• /
• v.11 no.1
• /
• pp.14-31
• /
• 1988

The national family planning program in Korea, which was instituted as an integral part of the nation's economic development plans since 1962, has contributed greatly to a reduction in the fertility and population growth rate. The total fertility rate dipped from 6.0 births per women in 1960 to 2.0 in 1985, and the population growth rate rom 2.84 percent per year to 1.25 percent during the same period, while the contraceptive practice rate for the 15-44 married women increased from 9 percent in 1965 to 70 percent in 1985. Study findings indicate that the fertility reduction in the past 26 years is largely attributed to the virgorous implementation of the national family planning program, rising age at marriage, wide-spread use of induced abortion, and the changes in attitude regarding the value of children that came into being in the wake of the rapid socio-economic development over the period. Among the strengths of the national family planning program are the following : 1) a pluralistic system of program manageent with active participation of various government and voluntary organizations, 2) utilization of a large corps of family planning field workers to conduct face-to-face communication and motivation activities, 3) use of private physicians with government support to provide contraceptive services, 4) a systematic program management system including program planning of traget allocation, evaluation, and supervision with a broad MIS and award system, 5) numerous incentive and disincentive schemes for stimulating the small family norm and contraceptive use, and 6) strong commitments to the family planning program by political leaders. The new demographic targets during the Sixth Five-Year Economic and Social Development plan period(1987-91) have been set for a further reduction in the population growth rate to 1.0 percent by 1993, assuming that the TFR will decline to 1.75 level in 1995. This target is, however, not easy to achieve due to anticipated unfavorable factors like the strong boy preference, high discontinuation rates of reversible contraceptive methods, fertility termination-oriented contraceptive use, a plateau level of contraceptive practice rate that has mostly accounted for a sterilization, shortened length of birth intervals, and the changing patterns of contraceptive mix. The recent changes in contraceptive and fertility behaviors clearly indicate that the past quantity-oriented management system of the national program should be redirected toward a quality-oriented approach. Particularly, program efforts should be expanded to recruit new contraceptive users in the 20s of younger age groups, both for birth spacing and controlling their fertility since the women aged 20 to 29 account for more than 80 percent of the total annual births in recent years. In addition, the current contraceptive fee system of the national family planning program should be gradually shifted from free contraceptive services to a acceptor's charge system, and the provision of contraceptive services through the medical insurance system, which will cover the entire population by 1989, should be accelerated as a means of integration of family planning program with other health programs.