• Journal of Korean Society of Steel Construction
• /
• v.16 no.4 s.71
• /
• pp.415-423
• /
• 2004

To investigate the long-term corrosion resistance of an uncoated weathering steel, an important outdoor constructional steel material, skyward surfaces of the weathering steel and a control steel initially exposed to rural and industrial atmospheres for 9 years were electrochemically tested in neutral artificial rain in terms of electrochemical potentials, impedances, and anodic potentiodynamic polarization curves. Their results were then discussed. A quite passive and stable rust layer to the artificial rain was well formed on the skyward surface of the weathering steel exposed to the industrial and rural atmospheres, and its corrosion rate in the artificial rain was measured to be about a low $3{{\mu}m}/y$. Continuous immersion of all the weathered surfaces in the artificial rain revealed the gradual degradation of the weathered corrosion layers on the steel, resulting in a cathodically controlled corrosion of the substrate steel by the electrochemical measurements. Alloy components of the weathering steel were found to retard the degradation of the weathered corrosion layers on the steel in the artificial rain. For better corrosion evaluation of the weathering steel, more electrochemical measurements of surfaces that have been exposed for more than 9 years to more closely simulated atmospheric waters are needed. These measurements are almost non-destructive and can provide online and in situ information on the corrosion rate, the development of corrosion and the conditions of rust layers on any interested surface and at any exposure time of the steel, so they can be effectively applicable to the corrosion evaluation of steel structures such as bridges, towers, and architectures by forming an electrochemical cell on an interested structural surface and by using a portable electrochemical instrument.

• Journal of Satellite, Information and Communications
• /
• v.8 no.4
• /
• pp.150-158
• /
• 2013

In Korea, the official monitoring of the atmospheric re-entry of satellites or space debris was initiated by the first operation of a re-entry situation analysis team for the 'Cosmos 1402' of the Soviet Union, which main body re-entered on January 23, 1983 and radio active core re-entered on February 7, 1983. After this incident, a task force team consisting Korea Astronomy and Space Science Institute (KASI), Korea Aerospace Research Institute (KARI) and other related institutes operated a situation monitoring group under the supervision of the Ministry of Science and technology (MOST) for the controlled re-entry of the Russian 'Mir' space station in 2001. The re-entry of the upper atmospheric weather satellite 'UARS' of United States had been monitored and analyzed by KASI on September 24, 2011. As the re-entry of the space object has been frequently occurred, the government officials and the experts from MEST (Ministry of Education, Science and Technology), KASI, KARI had an urgent official meeting to establish a satellite re-entry monitoring room in KASI and to give an operational authority to KASI in September 14, 2011. Under this decision, the satellite re-entry monitoring room in KASI has successfully executed the monitoring, data analyzing, official reporting, media contacting, and public announcing for the German satellite 'Roentgen' in October 2011, Russian space explorer 'Phobos-Grunt' in January 2012, Russian satellite 'Cosmos 1484' in January 2013, and European geodetic satellite 'GOCE' in November 2013 with the support from the Korean Air Force and KARI.

• Journal of the Korean Ceramic Society
• /
• v.34 no.2
• /
• pp.115-122
• /
• 1997

The powder preparation by using emulsion drying method, one of the chemical powder fabrication methods has the advantages; easy to control the chemical stoichiometry and to fabricate homogeneously fine particles. In the present study, the initial morphology and size distribution of the powder fabricated by using emulsion dry-ing method were controlled and were improved the homogeneity. By carefully controlling the mixing ratio of oil phase and aqueous solution and surfactant of preventing emulsion separation, the Bi(Pb)-Sr-Ca-Cu-O su-perconducting powders were prepared. The properties of the superconducting powder fabricated by this method and the microstructures and superconducting properties of the pelletized samples were investigated. The microstructures and electric properties of the tapes prepared by oxide powder-in-tube method were in-vestigated. The fabricated powder was spherical with less than 1$\mu$m but most of them was agglomerated with 2~5$\mu$m in size. The critical temperature of the pelletized sample annealed at 84$0^{\circ}C$ for 72 hours in oxygen par-tial pressure of 1/13atm in Ar atmosphere was 108K. And the critical current of the first and second annealed tapes in air prepared by oxide powder-in-tube process were 0.4A and 1.5A, respectively.

• Journal of Food Hygiene and Safety
• /
• v.26 no.4
• /
• pp.342-348
• /
• 2011

The quality properties of peeled ginger (PG) were investigated during CA storage at different $CO_2$ concentrations. $O_2$ concentration was kept constant at 5% while $CO_2$ of 6%, 14%, 22% and 30% were used. It was found that the weight loss rate tended to decrease with an increase of $CO_2$. In the case of fixed $10^{\circ}C$ storage, the L-value and a-value of the exterior color in treatment increased more than that of control with respect to time, while the b-value of the exterior color and the cutting plane color showed no significant difference. In the exterior color, the results of PG-$25^{\circ}C$ showed similar with PG-$10^{\circ}C$ except b-value of the exterior color which showed not a little change. The cutting plane color did not showed significantly difference in the PG samples between $25^{\circ}C$ and $10^{\circ}C$. Hardness of the PG during storage was found to decrease most severely at 6% of $CO_2$ concentration regardless of storage temperature. The growth of microorganisms during storage of the PG tended to be restrained as $CO_2$ concentration increased. However, microorganisms, when maintained at $25^{\circ}C$ storage, multiplied rapidly to $10^8$ CFU/g within 4 days regardless of concentration.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.4
• /
• pp.596-601
• /
• 2020

Silicon carbide is considered a potentially useful material for high-temperature electronic devices because of its large band gap energy and p-type or n-type conduction that can be controlled by impurity doping. Accordingly, the thermoelectric properties of -SiC powder prepared by refined diatomite were investigated for high value-added applications of natural diatomite. -SiC powder was synthesized by a carbothermal reduction of the SiO₂ in refined diatomite using carbon black. An acid-treatment process was then performed to eliminate the remaining impurities (Fe, Ca, etc.). n-Type semiconductors were fabricated by sintering the pressed powder at 2000℃ for 1~5h in an N2 atmosphere. The electrical conductivity increased with increasing sintering time, which might be due to an increase in carrier concentration and improvement in grain-to-grain connectivity. The carrier compensation effect caused by the remaining acceptor impurities (Al, etc.) in the obtained -SiC had a deleterious influence on the electrical conductivity. The absolute value of the Seebeck coefficient increased with increasing sintering time, which might be due to a decrease in the stacking fault density accompanied by grain or crystallite growth. On the other hand, the power factor, which reflects the thermoelectric conversion efficiency of the present work, was slightly lower than that of the porous SiC semiconductors fabricated by conventional high-purity -SiC powder, it can be stated that the thermoelectric properties could be improved further by precise control of an acid-treatment process.

• The Korean Journal of Food And Nutrition
• /
• v.26 no.1
• /
• pp.60-65
• /
• 2013

This study investigated the quality changes of French fries when cooked under a lower pressure than the ambient atmosphere. This was derived from the concept of boiling point depression of water under reduced pressure. The pressure during the frying process was controlled at measures of 760 mmHg, 560 mmHg, 360 mmHg, or 160 mmHg. The frying apparatus was manufactured to cook foods up to $200^{\circ}C$ and to have a valve to control the pressure. French fries were cooked at $180^{\circ}C$ for 4 minutes. After each pressure level was achieved, the French fries were dipped into a frying oil bath and cooked for 4 minutes. The quality changes, including moisture content, starch gelatinization, textural and sensory properties of the French fries were measured. The moisture contents were decreased at all 4 pressure levels after frying. Starch gelatinization was not significantly different among the samples. The hardness of French fries cooked at 160 mmHg was the best. In addition, the sensory properties including brown color, taste, and crispiness of French fries cooked at 160 mmHg was the best. The overall preference was higher when the frying pressure was lower.

• Korean Journal of Remote Sensing
• /
• v.34 no.2_2
• /
• pp.419-429
• /
• 2018

An unmanned autonomous maritime surface system can move the vehicle to the areas for observing the ocean accidents, disasters, and severe weather conditions. Detection and monitoring technologies have been developed by the converging of the regional and local surveillance system. Wave Glider, one of the autonomous maritime surface systems, is ocean-wave propelled autonomous surface vehicle and controlled using Iridium satellite communication. In this study, we carried out two-time Wave Glider observations for 2016 and 2017 summer in the East China Sea that the area was influenced by low-salinity water. We observed the sea surface warming effect due to the low-salinity water using the regional (satellite) and local (Wave Glider) surveillance system. We also monitored the effect of the typhoon and understood the change of the ocean-atmosphere environments in real-time. New unmanned surface system with autonomous system and high endurance structure can measure comprehensively and usefully a long observation in complicated ocean environments because of connecting with other surveillance systems.

• Korean Security Journal
• /
• no.32
• /
• pp.123-150
• /
• 2012

The purpose of this study was to seek practical intelligences for certain persons who wish to be a guard by studying for what practical public guards' recognition of organization and vocation is. The results of this study were as follows. First, Six study participants presented 'Respect within members', 'Atmosphere like family', 'Premium members', and 'Economic compensation & wealth of budget' as essential requirements for the best guard organization. Second, they also presented 'Systematic daily task & training', 'Exact selection system', and 'Strong cohesion & teamwork' as strong points of their organization. Third, they mentioned 'Internal evaluation system', 'Lack of education contents', and 'Limited position circulation' as weak points of their organization. Fourth, they mentioned that they feel encouraged itself as they work in the best guard organization, while they were skeptical when the citizens did not cooperate with them and they were not fully rewarded for their injury. Fifth, they expressed 'Difficulty of business cooperation', 'Unstable living patterns', 'Inconsistent assessment', and 'Continuing tension' as difficulties for performing the duties and stress causes. Lastly, they recognized of job security and self-esteem as they work in the best guard organization as advantages of a job, while they recognized of controlled life, low salaries and welfare level compared to duty importance and risks as disadvantages of a job. Consequently, students who wish to be a guard should consider job and organization attributes and set their career goals refer to these results.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.29 no.4
• /
• pp.464-476
• /
• 2019

Objectives: This study aimed to assess the exposure levels of tollbooth workers to diesel particulate matter using black carbon (BC) and to find the correlations among variables associated with BC using the motor vehicle management act regulated by the Ministry of Land, Infrastructure and Transport. Methods: This study was performed over 14 days at a university in Seoul. BC levels were monitored using an aethalometer and were conducted around the breathing zones of the workers. There were three sampling locations: inside the tollbooth (front gate and rear gate) and an office as a control group. T-test, correlation, and multiple linear regression analysis were performed using SPSS. Results: The geometric mean (GM) of BC_30min concentrations in the exposure group was 2.44 ㎍/㎥, approximately 1.4 times higher than the control group (1.75 ㎍/㎥). The GM of BC_30min concentrations was 2.75 ㎍/㎥ during the heavy traffic time (9-10 am) and 2.30 ㎍/㎥ during non-heavy traffic times (p<0.001). The multiple linear regression analysis shows that the number of all types of vehicles and PM_2.5 concentrations in the atmosphere were factors increasing the GM of BC(ln(BC_30min)) concentrations (adjusted R²=0.42, p<0.001). The workers were constantly exposed to low concentrations (GM of BC_30min=2.44 ㎍/㎥), but they were exposed to peak concentrations instantly (BC_10sec=3545.04 ㎍/㎥). When the GM of BC_30min concentrations was momentarily represented as high, it was identified that a vehicle mainly using diesel fuel or an aging vehicle had passed. Conclusions: A ventilation system should be installed in the closed tollbooth or aging vehicles should be controlled so as not to pass tollbooths.

• Journal of the Korean institute of surface engineering
• /
• v.12 no.3
• /
• pp.207-216
• /
• 1979

Environmental pollution or contaminations caused by various kinds of pollutants have become one of most serious problems of our time. Environ mental pollution is the unfavoralble alteration of our surroundings, through direct or indirect effects of changes in energy patterns, rediation levels, chemical and physical constitution and abundances of organisms. These changes may affect humans directly or through their supplies of water and of agicultural and other biological products, their physical objects or possessions, or their opportunities for recreation and appreciation of nature. Pollutants that meet the criteria of this definition of environmental pollution are numerous: gases (such as sulfur dioxide and nitrogen oxides) and paniculate matter (such as smoke particles, lead aerosols, and asbestos) in the atmosphere; pesticides and radioactive isotopes in the atmosphee and in waterways; sewage, organic. chemicals, and phosphates in water; solid wastes on land; excessive heating (thermal pollution) of rivers and lakes; and many others. Some of these pollutants are introduced into the environment naturally, others by human actions, and most in both ways. Our major concer is with environmental pollution resulting wholly or largely as a by-product of human activities, because these can be controlled most readily. Environmental pollution cannot be solved by science and technology alone. It should be handled by an interdisciplinary approach with combined methods of science and technology as wen as social science disciplines for the better solution of this critical problem. In this respect, introducing "Environmental Science," a new scientific approach for the solution of environmental problems, which is now widely accepted by most developed countries of the world will be very helpful for systematization of theoretical basis for a new scientific approach to environmental pollution. Environmental science is "the study of all systems of air, land, water, energy, and life that surround Man. It includes all sciences directed to the system-level of understanding of the environment, drawing especially upon such disciplines as meteorology, geophysics, oceanography, and ecology, and utilizing to the fullest knowledge and techniques developed in such fields as physics, chemistry, biology, mathematics and engineering as well as many social science disciplines, such as economics, such as economics, law, political science and public administration." The components of this discipline are not new, for they are drawn from existing areas of science within biology chemistry, physics, and geoscience. What is really new about environmental science, however, is it siewpoint - its orientation to global problems, its conception of the earth as a set of interlocking, interacting systems, and its interest in Man as a part of these systems.