• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.922-929
• /
• 2006

In this study, flow characteristics of the FPN (Fountain Pen Nano-Lithography) using active membrane pumping are investigated. This FPN has integrated chamber, micro channel, and high capacity reservoir for continuous ink feed. The most important aspect in this probe provided control of fluid injection using active membrane pumping in chamber. The flow rates in channel by capillary force are theoretically analyzed, including the control of mass flow rates by deflection of membrane. The above results are compared with numerical simulations that calculated by commercial code, FLUENT. The velocity of fluid in micro channel shows linear behaviors. And the mass flows are proportional to the second order function of pumping pressure that is imposed to membrane.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.384-387
• /
• 2006

Vertical L/UL (Load/Unload) velocity is very important parameter to determine the L/UL performance, and the vertical velocity is determined by the actuator velocity and the ramp profile. However, it is not easy to precisely control the actuator rotating velocity during the L/UL process. Especially in emergency parking, servo system doesn't operate, it is impossible to control an actuator velocity. Then, the vertical unloading velocity depends on only ramp profile. The ramp height and the sliding length for L/UL process in SFF (Small Form Factor) HDD are restricted due to slimness and small media. For these reasons, it is very difficult to design the ramp profile in SFF HDD. Therefore, this study analyzes the unloading dynamic characteristics for various ramp profiles and makes the thesis for ramp profile design.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.8
• /
• pp.525-531
• /
• 2015

Driving sound is an effective element to promote the product identity of a vehicle by providing customers with attractive sound which reflects the concept of a vehicle. Recently, major automakers are focusing on the target sound setting so that the sound can represent the brand image as well as the unique concept of a vehicle. In this study, a new method of target setting for the driving sound will be introduced based on using formant filter and musical harmonics characteristics. In addition, a target sound suggested from this method will be realized and verified by using active noise control in vehicle.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.337-343
• /
• 2012

NREL(National Renewable Energy Laboratory) Baseline controller conduct using method proposed RISO National Laboratory in Region 3. which designed the blade-pitch control system using a single degree-of-freedom model of the wind turbine. Idealized PID-Controlled rotor-speed error will respond as a second-order system with the natural frequency and damping ratio. RISO proposed specific natural frequency(=0.6 rad/s) and damping ratio(=0.7). If specific Eigen value apply to NREL 5 MW wind turbine, differ with pitch respond for simulation results of RISO report. Variation of specific eigen value investigate performance of NREL 5 MW wind turbine.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2123-2125
• /
• 2002

This paper presents the use of piezoelectric ceramics for sensing and actuation purposes for vibration control. The PZT sensors and actuators are designed and fabricated. The transfer function of the beam is obtained via the Lagrangian method.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.969-974
• /
• 2008

As the railway becomes higher, the reliable stability and riding comfort of higher railway are required. To improve the riding comfort of high-speed trains, it is very helpful to use active suspension system for railway. In Japan, the high-speed train, Shinkansen has adopted semi-active suspension system and now it is running in the main trunk. In this paper, the authors introduce several technical trends of vibration control methods of Japanese Shinkansen. And the installation of semi-active suspension to HSR 350x and the test result of test run on the Kyoung-Bu high speed ling are also explained. After development of HSR 350x, new R&D national project of high speed train is progressed by Ministry of Land, Transport, and Maritime Affairs. This project is the development of Electric Multiple Unit of high speed train with 400km/h of maximum test speed. These result would be helpful to progress next generation high speed project.

• The Journal of the Acoustical Society of Korea
• /
• v.7 no.2
• /
• pp.5-19
• /
• 1988

The feedback controllers for the active vibration control of elastic systems are developed using optimal regulator, optimal tracking, time optimal and noise observer algorithms. Using the modal analysis of the elastic systems, the effects of the actuator positions, the input weighting factor and the magnitude of the constraint of the actuator force are investigated.

• Computational Structural Engineering
• /
• v.4 no.4
• /
• pp.10-13
• /
• 1991

현대의 건물은 초고층화 되어가기 때문에 바람이나 지진에 의한 건물의 과다진동이 일어나며 이것은 기초분리(base isolation) 방법 또는 제진장치를 설치함으로써 해결할 수가 있다. 기초분리 방법은 지진 다발 지역에서 지진에 의한 피해를 감소시키기 위하여 주로 이용되며 제진장치는 지진은 물론 바람을 받는 고층건물, 타워, 다리 등의 대형 구조물의 제진에 사용이 되며 병원, 컴퓨터센터, 그리고 반도체 공장 등 정밀한 작업이 이루어지는 곳에서의 국부적인 제진에 적용이 되고 있다. 제진장치는 수동제진장치와 능동제진장치로 대별이 되며 원리는 질량을 이용한 건물의 감쇠력을 증대시키는 데 있다. 능동제진장치를 이용한 시스템은 과다한 설치비와 운영비 뿐만 아니라 강한 바람이나 지진이 왔을 때 전력 중단이 되어 작동이 되지 않을 때가 있으므로 현재로서는 수동제진장치가 많이 이용이 되고 있다. 따라서 현재 강한 바람이나 지진에 대한 건물전체의 거동은 수동제진장치에 의하여 대처하고 약한 바람과 지진 등에 대한 국부적인 제진에는 능동제진장치를 이용하는 복합제진시스템(hybrid vibration control system)이 제시되고 있다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.9 s.90
• /
• pp.827-836
• /
• 2004

In this paper, we design a robust multi-objective track-following controller that satisfies transient response specifications and diminishes the influence of sinusoidal disturbance. To this end, a robust control problem with the multiple constraints is considered. We show that a sufficient condition satisfying the robust control problem can be expressed by linear matrix inequalities. Finally, the robust track-following controller can be designed by solving an LMI optimization problem. The effectiveness of the proposed controller design method is verified though experiments.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.876-881
• /
• 2003

This study focused on to design and toanalysis of a myoelectronic hand. We considered a low frequency factor in human life and to quantify low frequency which a human body responded to using a 1-axis ant a 3-axis accelerometer. The dynamic myoelectronic hand are important for tasks such a continuous prosthetic control and a EMG signal recognition, which have not been successfully mastered by the most neural approached To control myoelectronic hand, classifying myoelectronic patterns are also important. Experimental results of FEM are 110㎫ on Thumb, 200㎫ on Index finger, 220㎫ on Middle finger 260㎫ on Ring finger and 270㎫ on Little finger. Experimental results of accelerometer are 1.4-0.4(m/s2) ,(5-20(〔Hz〕) in Feeding activity and 0.4-0(m/s2) (0-10〔Hz〕) in Lifting activity. Considering these facts, we suggest a new type myoelectronic hand.