• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.04a
• /
• pp.235-240
• /
• 1997

터널발파는 벤치발파와 달리 일반적으로 심발발파, 주변공발파, 조절발파를 적용하는 최외곽공 발파로 나눌 수 있는데, 본 연구에서는 심발공법별 터널발파의 진동특성을 자유면의 수를 고려하여 해석하였다. 또한 터널발파의 발파효율에 가장 큰 영향을 미치는 심발발파 발파공들간의 지연지차를 서로 달리하면서 시험발파를 수행하였다. 국내 고속전철 건설현장의 터널발파시 측정한 진동속도의 파형분석결과 1자유면 발파인 심발발파시 발생하는 발파진동이 2자유면 발파인 주변공 발파시 발생하는 발파진동보다 30% 이상 더 크게 나타났고, 조절발파용 화약을 사용한 최외곽공 발파의 경우는 주변공발파보다 20% 정도 작은 진동속도를 나타내었다. 심발공법별 비교에서는 SUPEX-Cut의 경우가 국내에서 가장 널리 사용되는 V-Cut에 비해 20-30% 정도 더 작은 진동속도를 나타내었다. 또한 심발공들을 동시에 발파한 경우와 각 발파공의 시차를 서로 다르게 한 경우의 심발 시험발파 결과를 분석한 결과, 발파공간의 발파시차를 60msec 이상으로 하였을 때, 각 발파공의 발파시 발생한 진동이 서로 중첩되는 것을 방지할 수 있는 것으로 나타났다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.1229-1234
• /
• 2006

This paper is concerned with the dynamic modeling and controller design for a cylindrical shell equipped with MFC actuators. The dynamic model was derived by using Ravleigh-Ritz method based on Donnel-Mushtari shell theory. The boundary conditions at both ends were assumed to be shear diaphragm. To verify the theoretical results, a cylindrical shell structure made of aluminum was built ana tested by using impact hammer. Experimental results show that there are little discrepancies compared to theoretical results because of the boundary conditions at both ends. The MFC actuators were glued to the cylindrical shell in longitudinal and circumferential directions. The PPF controller were designed for lowest two modes and applied to the MFC actuators. The experimental results show that vibrations can be successfully suppressed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.219-223
• /
• 2006

This paper presents a gantry type 3-axes positioning system, which is useful to test control algorithms for coordinate measuring machines and industrial cranes. The dynamic characteristics of the system have been investigated through a series of finite element analysis and experiments. In order to minimize the residual vibration during movement, this paper implements input shaping algorithms for the system with the information from the dynamic analysis. The results show that the dynamic performance of the system can be significantly improved by the dynamic analysis and implementation of input shaping

• Proceedings of the KIEE Conference
• /
• 1997.07e
• /
• pp.1847-1849
• /
• 1997

This paper describes the analysis of vibration signals of distorted mold transformer. For experiment, the acceleration sensors were adhered on the surface of winding and on the core. The vibration signals measured as variation of control variables were analyzed using data acquisition system. It was shown that the vibration signals of distorted mold transformer were distinguished from those of normal mold transformer.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.142-147
• /
• 2003

This paper is concerned with the experiment of vibration isolation device whit can cope with heave, pitch and roll type vibrations. This new device consists of S-shaped piezoceramic actuators supporting each corner of the plate. Small piezoceramic sensors are located at the middle of each side. This paper also presents the development and the movement of the system. The active control technique was also developed to cope with base excitation. Experimental results show that vibrations can be reduced by the new device in the case of base excitation of harmonic type.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.1000-1004
• /
• 2001

This study explores the free vibrations of tapered column with hinged end restricted by rotational spring. The ordinary differential equation governing the free vibration of such column is derived as nondimensional form in which three kinds of cross-sectional shape are considered. In order to obtain the natural frequencies of column, the governing differential equation is solved by numerical procedures. Numerical results are compared with existing solutions by other methods. It is expected that the results obtained herein can be practically utilized in the structural and the vibration control fields.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.11 s.104
• /
• pp.1241-1247
• /
• 2005

An automation of primary vibration calibration system was developed and tested. Using GPIB interface, the console PC make the control of equipments, signal collecting and save measuring results automatically by the instructions in the program by Visual Basic. Several trials of automatic calibration for the accelerometer(ENDEVCO 2270) using this developed system give the reliable results.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.1
• /
• pp.3-10
• /
• 2008

In this paper, the optimal command input is considered in order to minimize the residual vibrations of a flexible cantilever beam when the beam simply changes its position by translation or rotation. Although a cantilever beam has many modes of vibration, it is shown that the consideration of the first mode is sufficient in this case. Thus, the problem becomes a single-degree-of-freedom system subjected to a ground excitation. Two simple methods are proposed to find the optimal command input based on the shock response spectrum (SRS). The first method is the simplest and can be applied to lightly damped cases, and the second method is applicable to more general problems. The second method gives almost the same results as the input shaping method. However the proposed method gives a easier and clearer control strategy.

• Nano
• /
• v.13 no.10
• /
• pp.1850112.1-1850112.6
• /
• 2018

Optical manipulation on microscale and nanoscale structures opens up new possibilities for assembly and control of microelectromechanical systems and nanoelectromechanical systems. Static optical force induces constant displacement while changing optical force stimulates vibration of a microcantilever/nanocantilever. The vibratory behavior of a single carbon nanocoil cantilever under optical actuation is investigated. A fitting formula to describe the laser-induced vibration characteristics is deduced based on a classical continuum model, by which the resonance frequency of the carbon nanocoil can be determined directly and accurately. This optically actuated vibration method could be widely used in stimulating quasi-1D micro/nanorod-like materials, and has potential applications in micro-/nano-opto-electromechanical systems.

• Korean Journal of Applied Biomechanics
• /
• v.25 no.4
• /
• pp.383-391
• /
• 2015

Objective : The purpose of this study was to investigate the effects of dynamic squats with slope-whole body vibration (WBV) on the trunk and lower limb in muscle activities. Method : 9 healthy women (age: $21.1{\pm}0.6years$, height: $160.5{\pm}1.4cm$, body weight: $50.5{\pm}2.4kg$) were recruited for this study. Muscle activities in the trunk and lower limb muscles, including biceps femoris (BF), rectus femoris (RF), rectus abdominum (RA), gastrocnemius (GCM), iliocostalis lumborum (IL) and tibialis anterior (TA), were recorded using an EMG measurement system. The test was performed by conducting dynamic squats with slope-WBV using frequency (10Hz, 50Hz), amplitude (0.5mm), and degree ($0^{\circ}$, $5^{\circ}$). Experimental method consisted of 2-pre-sessions and 1-test-session for 20 seconds. Results : The results showed that the muscle activities of the trunk and low limb muscles increased significantly with the $5^{\circ}$ slope and lower frequency (10Hz) except for in the TA. From this result, we confirmed that the slope and WBV could efficiently affect stimulation, enhancing muscle activities by facilitating neural control trail and muscle chain tightness. Conclusion : Utilizing the slope-WBV device while squatting could give positive effects on muscle activation in the trunk and lower limb muscles and provide neural stimulation, enhancing muscle chain of control subsystem through TVR (tonic vibration reflex).