• Journal of Radiation Protection and Research
• /
• v.46 no.3
• /
• pp.120-126
• /
• 2021

Background: This paper aims to evaluate the clinical utility and radiation dosimetry, for the mobile X-ray imaging of patients with known or suspected infectious diseases, through the window of an isolation room. The suitability of this technique for imaging coronavirus disease 2019 (COVID-19) patients is of particular focus here, although it is expected to have equal relevance to many infectious respiratory disease outbreaks. Materials and Methods: Two exposure levels were examined, a "typical" mobile exposure of 100 kVp/1.6 mAs and a "high" exposure of 120 kVp/5 mAs. Exposures of an anthropomorphic phantom were made, with and without a glass window present in the beam. The resultant phantom images were provided to experienced radiographers for image quality evaluation, using a Likert scale to rate the anatomical structure visibility. Results and Discussion: The incident air kerma doubled using the high exposure technique, from 29.47 µGy to 67.82 µGy and scattered radiation inside and outside the room increased. Despite an increase in beam energy, high exposure technique images received higher image quality scores than images acquired using lower exposure settings. Conclusion: Increased scattered radiation was very low and can be further mitigated by ensuring surrounding staff are appropriately distanced from both the patient and X-ray tube. Although an increase in incident air kerma was observed, practical advantages in infection control and personal protective equipment conservation were identified. Sites are encouraged to consider the use of this technique where appropriate, following the completion of standard justification practices.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.12
• /
• pp.80-86
• /
• 2020

With the exception of welding activities, it is forbidden to use electricity in shipyards, owing to safety concerns such as the possibility of fire, explosions, and short circuits. In this paper, an automatic chamfering machine using pneumatics is proposed for use in such environments. Customers specify their requirements and the machine derives the corresponding theoretical design conditions. The proposed machine was used to perform 3D modeling, and its suitability and performance were confirmed via cutting experiments of the manufactured device. Two types of sensors may be used in this system: contact and non-contact. In the case of the contact type, an end-stop switch that can recognize the end of the material is installed, and when the machine reaches the end of the material, the end-stop switch is operated to cut off the air pressure. In the non-contact type, four sensors were used: photonic, ultrasonic, metal detection, and encoder. The use of the four sensors was repeated 30 times, and the average error determined. Thus, the optimum sensor was identified.

• Journal of Microbiology and Biotechnology
• /
• v.32 no.11
• /
• pp.1479-1484
• /
• 2022

Bacterial cellulose (BC) is gaining attention as a carbon-neutral alternative to plant cellulose, and as a means to prevent deforestation and achieve a carbon-neutral society. However, the high cost of fermentation media for BC production is a barrier to its industrialization. In this study, chestnut shell (CS) hydrolysates were used as a carbon source for the BC-producing bacteria strain, Gluconacetobacter xylinus ATCC 53524. To evaluate the suitability of the CS hydrolysates, major inhibitors in the hydrolysates were analyzed, and BC production was profiled during fermentation. CS hydrolysates (40 g glucose/l) contained 1.9 g/l acetic acid when applied directly to the main medium. As a result, the BC concentration at 96 h using the control group and CS hydrolysates was 12.5 g/l and 16.7 g/l, respectively (1.3-fold improved). In addition, the surface morphology of BC derived from CS hydrolysates revealed more densely packed nanofibrils than the control group. In the microbial BC production using CS, the hydrolysate had no inhibitory effect during fermentation, suggesting it is a suitable feedstock for a sustainable and eco-friendly biorefinery. To the best of our knowledge, this is the first study to valorize CS by utilizing it in BC production.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.3
• /
• pp.335-342
• /
• 2021

In this study, we identify the suitability of monitoring the hygiene control of meals using ATP bioluminescence assay in children's foodservice facilities. Most ATP measured value by measurement area in childcare centers were lower in the second round than in the first round, and most hygiene control suitable rate by measurement area in childcare centers and kindergartens was higher in the second round. Also, in childcare centers, there was a positive correlation between the number of ATP measurement and the average score. In conclusion, ATP bioluminescence assay could be available as a monitoring tool for meal hygiene control in children's foodservice facilities, especially in childcare centers.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.755-761
• /
• 2017

This study was conducted to establish an analytical method using an HPLC system equipped with a photodiode array (PDA) detector for the quality control of raw materials and cosmeceuticals containing fucoxanthin as an active ingredient. The column was octadecyl-functionalized silica gel and the measurement wavelength of the PDA was set to 499 nm. To validate the analytical method, the linearity of the calibration curve, detection limit, reproducibility and recovery rate were investigated and good results were obtained. The correlation coefficient of the calibration curve was 1.000 and the linearity was good in the concentration range of 0.5 ~ 100 ppm. Moreover, the limit of detection (LOD) was 0.1 ppm and the limit of quantification (LOQ) was 0.5 ppm. The results of the peak reproducibility test used for evaluating the system suitability showed that the RSD (n = 5) of the peak area was 2.0% and that of the retention time was 0.09%. In the spiking test, the recovery rate was $101.6{\pm}0.77%$. The fucoxanthin contents of the two kinds of fucoxanthin-containing raw materials were $49.6{\pm}3.3%$ and $1.03{\pm}0.016%$, respectively. In addition, the fucoxanthin content in the test product, which was intended to be 150 ppm, was $156.7{\pm}4.7ppm$. From the above results, it was concluded that this method could be applied to the quantitative analysis of fucoxanthin in cosmeceuticals.

• Journal of Agricultural Extension & Community Development
• /
• v.22 no.1
• /
• pp.43-54
• /
• 2015

This study explored the effects of adoption of innovation and resistant attitude on farmers' perspectives and also was deigned for developing prompt spread of ICT and facilitating stronghold support center in the convergence agricultural field. To closely examine the variation for exploitation intent of stronghold support center in the ICT convergence agriculture, 110 farmers who had experienced introduction for ICT hybrid environmental control system were participated in the study using the questionnaire. The results revealed the several findings. Firstly, there was no significant differences between the self-efficacy such as confidence of application technology for farmers and adoption of innovative technique (p=.075). Secondly, suitability of using ICT hybrid environmental control system showed a significant difference in the adoption of innovation (p=2.750) while complexity of using ICT hybrid environmental control system indicated the negative effects on the adoption of innovation (p=3.591). Thirdly, introduction cost of ICT hybrid environmental control system showed the negative effects in the adoption of innovation (p=2.278), whereas adoption of innovation indicated a significant difference in the stronghold support center in the convergence agricultural field (p=5.500). Finally, resistance of ICT adoption of innovative technique revealed the negative effects on the stronghold support center in the ICT convergence agriculture. This study, therefore, demonstrated that educational assistance for acquiring ICT technique, suggestion of influences for productivity, and development for skills were needed to extend ICT convergence technology. Additionally, the study indicated the strategies related with promotion as well as ways of minimizing introduction cost.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.15 no.5
• /
• pp.31-48
• /
• 2012

The purpose of this study is to select indicators by a methodical approach and to establish a functional assessment system as a basic study for planning and constructing green space of forest. The types of green space were divided into 6 classes based on theoretical reviews of literature and the functions of green space were restricted to 'nature-ecological function', 'environment-control function' and 'usage function'. As a result of the selection of indicators, 35 indicators were initially selected by theoretical review and these indicators were reduced to 29 through brainstorming. Also, these indicators were classified into three functions such as 12 indicators (nature-ecological function), 8 indicators (environment-control function), 6 indicators (usage function) by analysis of suitability. According to the result of selection of the optimum indicators using MCB (Multiple Comparisons with the Best treatment) analysis, the optimum indicators of 7, 5, and 4 respectively by each function were selected for forest green space. The results of AHP (Analytic Hierarchy Process) for the establishment of the assessment system in forest, the weight of nature-ecological function was evaluated highest at 0.558, while the weight of environment-control and usage function were calculated at each 0.277, 0.165. 'Naturality (0.189)', 'Carbon sink (0.235)', and 'Accessibility (0.354)' among indicators showed highest by each function. The weight of indicator and assessment system may be used as a valuable guideline in case of assessing synthetically green space within urban planning.

• Journal of the Korean Geosynthetics Society
• /
• v.14 no.4
• /
• pp.45-58
• /
• 2015

Even though the plate bearing test (PBT) to evaluate the load baring capacity and the field density test to evaluate the relative density are mainly used for quality control of soil compaction in Korea, use of the dynamic cone penetrometer test (DCPT) and the dynamic plate bearing test (DPBT) considering economic feasibility, rapidity, and suitability for field conditions increase to use for quality control of soil compaction. In this study, bearing capacity and relative density of subgrade with thickness of 20 cm, 30 cm, and 40 cm are estimated using PBT, DCPT, DPBT and field density test in three field compaction tests, and the relationship among various compaction evaluation methods is analyzed and discussed.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.2
• /
• pp.173-180
• /
• 2014

In this paper, the instrument flight certification process and flight test results of Korean Utility Helicopter (KUH) are presented. For the instrument flight certification, the suitability of installed equipments and instruments have been reviewed and verified by ground and flight tests. Next, static and dynamic stability test are conducted in accordance with FAR-29 Appendix B. The static stability is determined by the change of speed and attitude according to control inputs. The dynamic stability is evaluated by how quickly the response of the helicopter due to long and short period control inputs are decreased. The pilot workload evaluation are also carried out by simulated IMC flight tests. This paper presents the workload assessment results when some failures are occurred at cockpit instruments, engine or flight control systems as well as the normal situation. After the simulated IMC flight test is completed, actual instrument flight test are conducted in a real IMC environment according to the air traffic controls.