• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2013.11a
• /
• pp.98-99
• /
• 2013

Recently, solar control facade systems are highlighted due to its low cost and outstanding applicability for green remodeling. However, it has not been long time since the systems were introduced. Therefore, the application study of the solar control system also has been insufficient. In this study, simulated models were developed and three types of solar control systems(i.e., overhang, blind, and screen)are installed in the models. The efficiency of energy savings and investment payback period according to the application of solar control facade system were analyzed.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.1
• /
• pp.162-167
• /
• 2004

In this research the Co-simulation technique for an electric power steering system with MATLAB/SIMULINK and a full vehicle model with ADAMS has been developed. The dynamic responses of vehicle chassis and steering system are evaluated. Then, a full vehicle model interacted with EPS control is concurrently simulated with an impulsive steering wheel torque input to analyze the stability of 'free control' or hands free motion for Sports Utility Vehicle. This integrated method allows engineers to reduce the prototype testing cost and to shorten the developing period.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.82.6-82
• /
• 2001

This paper presents the control X-Y table being the precise movement by point-to-point in the x-y plane. The dual modulus technique is used for our system to control the frequency of pulse supplied to the motors. Such technique is used to stop motor of both axes accurately as the desired target point in the same period. Both motors are stepping motor. To Improve steps per revolution, we employ ministep form to drive motors. In system, personal computer, using parallel port, is used for computing algorithm in open-loop form to control motors. In experiment, our system applies on the X-Y table for drawing to test system performance.

• Ocean Systems Engineering
• /
• v.9 no.1
• /
• pp.1-19
• /
• 2019

Latching control was applied to a Wave Energy Converter (WEC) buoy with direct linear electric Power Take-Off (PTO) systems oscillating in heave direction in waves. The equation of the motion of the WEC buoy in the time-domain is characterized by the wave exciting, hydrostatic, radiation forces and by several damping forces (PTO, brake, and viscous). By applying numerical schemes, such as the semi-analytical and Newmark ${\beta}$ methods, the time series of the heave motion and velocity, and the corresponding extracted power may be obtained. The numerical prediction with the latching control is in accordance with the experimental results from the systematic 1:10-model test in a wave tank at Seoul National University. It was found that the extraction of wave energy may be improved by applying latching control to the WEC, which particularly affects waves longer than the resonant period.

• Annual Conference of KIPS
• /
• 2010.11a
• /
• pp.1038-1041
• /
• 2010

오늘날 대부분의 네트워크는 수십 Gb/s 를 지원하는 광네트워크다. 이러한 고속 네트워크에서 대부분 TCP 전송 프로토콜을 사용하고 있다. TCP 전송 프로토콜은 AIMD 방식의 특성으로 인해 고속 네트워크에 적합하지 않다. 반면 UDT 는 DAIMD 방식을 사용하기 때문에 고속 네트워크에서 가용대역폭을 충분히 활용 가능하다. 그러나 UDT 는 sync-interval 간격으로 rate control 이 이루어 지기 때문에 sync-interval 동안 가용 대역폭을 충분히 활용하지 못하는 문제점이 발생한다. 본 논문에서는 RTT 예측을 통한 sync-interval 구간에서의 rate control 기법을 제안한다. sync-interval 구간 동안 RTT 예측을 통해 rate control 을 함으로써 기존 UDT에 비해 고속 네트워크 환경에서 보다 빠르게 가용대역폭을 활용할 수 있다. 네트워크 시뮬레이션 결과 기존 UDT 에 비해 throughput 및 안정성이 향상되었다.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.51 no.12
• /
• pp.556-561
• /
• 2002

In this paper, a discrete-time variable structure controller for linear time-varying sampled-data systems with disturbances is proposed. The proposed method guarantees that the system state if globally uniformly ultimately bounded (G.U.U.B), and the ultimate bound is shown to be the order of T, O(T), where T is a sampling period.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.9
• /
• pp.1584-1588
• /
• 2007

This paper proposed the voltage compulsion method that used chopper for light dimming control of fluorescent lamp. During the dimming period, electronic ballasts have the bad characteristics such as low power factor, high THD(Total Harmonic Distortion) and etc. The proposed dimmer improves power factor, THD of electronic ballast and has benefit such as low cost, simple build up.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.2 no.2
• /
• pp.34-41
• /
• 1992

A robust and reliable learning and reasoning mechanism is addressed based upon fuzzy set theory and fuzzy associative memories. The mechanism stores a priori an initial knowledge base via approximate learning and utilizes this information for decision-making systems via fuzzy inferencing. We called this fuzzy computer architecture a 'fuzzy hypercube' processing all the rules in one clock period in parallel. Fuzzy hypercubes can be applied to control of a class of complex and highly nonlinear systems which suffer from vagueness uncertainty. Moreover, evidential aspects of a fuzzy hypercube are treated to assess the degree of certainty or reliability together with parameter sensitivity.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 2006.05a
• /
• pp.164-168
• /
• 2006

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 2006.05a
• /
• pp.160-163
• /
• 2006