• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.44 no.2
• /
• pp.115-123
• /
• 2021

A lot of sensor and control signals is generated by an industrial controller and related internet-of-things in discrete manufacturing system. The acquired signals are such records indicating whether several process operations have been correctly conducted or not in the system, therefore they are usually composed of binary numbers. For example, once a certain sensor turns on, the corresponding value is changed from 0 to 1, and it means the process is finished the previous operation and ready to conduct next operation. If an actuator starts to move, the corresponding value is changed from 0 to 1 and it indicates the corresponding operation is been conducting. Because traditional fault detection approaches are generally conducted with analog sensor signals and the signals show stationary during normal operation states, it is not simple to identify whether the manufacturing process works properly via conventional fault detection methods. However, digital control signals collected from a programmable logic controller continuously vary during normal process operation in order to show inherent sequence information which indicates the conducting operation tasks. Therefore, in this research, it is proposed to a recurrent neural network-based fault detection approach for considering sequential patterns in normal states of the manufacturing process. Using the constructed long short-term memory based fault detection, it is possible to predict the next control signals and detect faulty states by compared the predicted and real control signals in real-time. We validated and verified the proposed fault detection methods using digital control signals which are collected from a laser marking process, and the method provide good detection performance only using binary values.

• The Korean Journal of Archival Studies
• /
• no.17
• /
• pp.247-292
• /
• 2008

Investigations have been started to set the modern history and national spirit to rights after Commissions were established. Those Commissions are established and operated with time limit to finish its own missions. They creates three kinds of records as acquired materials which acquired or are donated for investigation; investigation records as investigation reports; and administrative records that created while supporting organization's operation. The Commissions use more past records to do special tasks asnation's slate clean and uncovering the truth than other agencies. In other words, the commissions take the most advantages of well-managed records, however, their record management environment and operation systems are relatively loose than other permanent machineries. It has three reasons that; first, there is no record management regulations and criteria for machineries that have time limit. This affected each commissions 'systems and 6 Truth Commissions' record management systems are built separately and on the different level; Second, members lack responsibility from frequent sending, reinstatement, change, and restructuring and that makes troubles to produce and manage records; Third, central archives pay less attention to machineries that operated limited period as the truth commissions. The Commissions rather need more systematic control because its records have historical value. To solve these problems, record management regulations have to be prepared first with features of organizations running limited time and commissions' records as acquired materials or investigation records. Furthermore, building up standard record management system for the Commissions, standardizing transfer data, imposing professional record personnel, and setting limits frequent personnel changes would finish practical problems. Besides, those records created to reveal the truth should use for education and research because Truth Commissions are established to set unfortunate history right and not to repeat it again. The records would serve as steppingstone for establishment of the Truth Record Center that does education, information work, publication, and research with the records. The record center would help using the records efficiently and improving knowledge for its people. And, the center should devote people to recognize importance of the records.

• The Korean Journal of Archival Studies
• /
• no.29
• /
• pp.35-78
• /
• 2011

This study is intended to recommend for acquisition methods of the theatre collection. Theatre activities is representative of the performing arts, and the Korea theatre history start from the modern history of Korea. In the meantime, theatre collections has already been lost by a lack of effort and management, and scattered most of the collections. In particular, a one-off nature and volatility of theatrical performances make future generations to enjoy the performances and to study should consult the relevant records. Therefore, collecting records can be very serious mission. In this study, theatre collections of the country which aims to collect and analyze the characteristics and type of theatre collections. Based on this information, collection scope, targets, priorities, acquisition level, method of collecting are proposed the following. First, collection scope is defined for the theatre related collections which was performed nationwide in the 1900s, the times that modern theatre was begun. The object includes related information of planning, administration, drama (script), directing, stage design, public relations, production, evaluation, personal records, biographical data, group data and space data. Second, the theatre collections are divided into records and historical records. Priority of collections object is determined by the historical value and the theatre performed by the support of public organization. Third, the acquisition level is divided into archived, mirrored, web linked and database, which is proposed by the determined levels of mandatory, recommend and discretion according to the characteristic of performance. Fourth, acquisition methods are suggested by the general acquisition methods of transfer, donation and purchase as well as the methods of copy, production, legal deposit, entry and web link etc. The acquisition of theatre collections is executed on digital-based environment, and a centralized authority control should be establishmented. And through the development of network with theatre's stakeholders and the cooperation of related organizations, theatre collections acquisition is feasible.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.12
• /
• pp.141-149
• /
• 2022

In this paper, we propose a design of CCTV enlcosure record management system based on blockchain. Since CCTV video records are transferred to the control center through enclosure, it is very important to manage the enclosure to prevent modulation and damage of the video records. Recently, a smart enclosure monitoring system with real-time remote monitoring and opening and closing state management functions is used to manage CCTV enclosures, but there is a limitation to securing the safety of CCTV video records. The proposed system detect modulated record and recover the record through hash value comparison by distributed stored record in the blockchain. In addition, the integrity verification API is provided to ensure the integrity of enclosure record received by the management server. In order to verify the effectiveness of the system, the integrity verification accuracy and elapsed time were measured through experiments. As a result, the integrity of enclosure record (accuracy: 100%) was confirmed, and it was confirmed that the elapsed time for verification (average: 73 ms) did not affect monitoring.

• Journal of Korea Trade
• /
• v.23 no.3
• /
• pp.68-83
• /
• 2019

Purpose - The UNCITRAL Model Law on Electronic Transferable Records (Model Law) is based on the principles of non-discrimination against the use of electronic means, functional equivalence, and technology neutrality underpinning all UNCITRAL texts on electronic commerce. Investigating the disagreements between the Model Law and the Koran Commercial Act (KC Act), including the B/L Regulation, and suggesting the revision of the KC Act including the B/L Regulation, could be a valuable study. The purpose of this paper is to contribute to the harmonization of Korean legislation regarding electronic bill of lading in compliance with the Model Law. Design/methodology - The Model Law is flexible to accommodate the use of all technologies and models, such as registries, tokens, and distributed ledgers: that is, blockchain. In 2007, the KC Act was revised to regulate electronic bills of lading to promote the widespread legal use of electronic bills of lading. In addition, The Regulation on Implementation of the Provisions of the Commercial Act Regarding Electronic Bills of Lading (the B/L Regulation) was enacted to regulate the detailed procedures in using electronic bills of lading in 2008. This paper employs a legal analysis by which this paper does find differences between two rules in light of technology neutrality and global standard of electronic bills of lading model. Findings - The main findings are as follows: i) the Korean registry agency has characteristics of a closed system. ii) The KC Act has no provision regarding control. iii) The KC Act discriminates other electronic bills of lading on the ground that it was issued or used abroad. Moreover, this study does comprehensive analysis of Korean Acts in comparison with the Model Law and, in particular, this study analyzes the differences between the KC Act and the Model Law by comparing article by article in view of the harmonization of the two rules. Originality/value - The subject of previous several studies was draft provisions on Electronic Transferable Records before completion of the Model Law; thus, these studies did not take into consideration the character of the Model Law as the Model Law was chosen at the final stage of legislation. This study is aimed at the final version of the Model Law. So, this study is meaningful by finding the suggestion and directions for the Korean government to revise the KC Act and the B/L Regulation in line with the Model Law.

• The Journal of Korean Academy of Prosthodontics
• /
• v.36 no.2
• /
• pp.302-322
• /
• 1998

This study was accompolished to analyze and compare the number and area of the occlusal contact points in healthy volunteers and athletes with normal occlusion. For this study, 15 athletes(13 amles and 2 females with average age 20) and 21 healthy volunteers(14 mles and 7 females with average age 20.09) were selected. The visual display acquired by scanning of occlusal record in maximal intercuspation was converted into 16 gray value image. Then, using computer program(J & Lee Occlusal Analyser), the pixel which was in definite range of the gray value was recognized, and the numbers of recognized pixel were calculated to area. The results were as follows ; 1. The average numbers of total occlusal contact feints were 31.05 in control group, and 34.67 in athlete group. The average area of total occlusal contacts was $100.25mm^2$ in control group, and $127.78mm^2$ in athlete group. 2. In control group, the average numbers of occlusal contact points were revealed in order as follows ; the first molar(8.48), the second molar(8.24), the second premolar(4.71), the lateral incisor(2.90), the first premor(2.43), the central incisor(2.19), and the canine(2.1). The least average in canine(2.1) was similar to the average(2.19) in central incisor and (2.09) in lateral incisor. In athlete group, the average numbers of occlusal contact points were revealed in order as follows ; the first molar(8.97), the second molar(8.47), the second premolar(5.60), the canine(3.80), the lateral incisor(3.33), the first premolar(2.67), and the central incisor(1.93). 3. In control group, the average areas of occlusal contact surface were revealed in order as follows ; the first molar($39.47mm^3$), the second molar($37.54mm^3$), the second premolar($9.54mm^3$) the first premolar($6.18mm^3$), canine($3.49mm^3$), the central incisor($2.76mm^3$), and the lateral incisor($1.28mm^3$). In athlete group, the average areas of occlusal contact surface were revealed in order as follows ; the first molar($44.11mm^3$), the second molar($40.69mm^3$), the second premolar($16.50mm^3$), the first premolar($9.39mm^3$), the canine($5.08mm^3$), the lateral incisor($3.7mm^3$), and the central incisor($2.25mm^3$). 4. With aging in both control and athlete group, there was a decreasing tendancy in average number of occlusal contact point, and was an increasing tendancy in average area of occlusal contact surface. In comparison at each age, both the numbers and area of occlusal contact were greater in athlete group than in control group. It was not significant in the numbers of occlusal contact points beween athlete and control group(p>0.1), but significant in the area of occlusal contact surface(p<0.03). 5. In comparision as to the kind of sports(Gymnastics : 2, Rugby : 3, Soccor : 5, Ice hocky : 5), the numbers of occlusal contact points were the most in ice hocky, and the area of occlusal contact surface was the greatest in gymnastics. With increasing a career in athlete group, there was a decreasing tendancy in average numbers of occlusal contact points and was an increasing tendancy in average area of occlusal contact surface. 6. By T-scan analyzing, the contact numbers on the anterior teeth were greater in control group than in athlete group, and on the posterior teeth were greater in athlete group than in control group. And the results acquired by T-scan were lesser than that caquired by the silicone bite records. It was not significant in the posterior teeth, but significant in the anterior teeth. In T-scan records, the numbers of occlusal contact points on second molar were the greatest, but in the silicone records, the numbers on first molar were the greatest.

• Journal of Korean Library and Information Science Society
• /
• v.46 no.4
• /
• pp.325-354
• /
• 2015

Corporate information has great value, but also poses great risk. Information governance is an organization's coordinated, inter-disciplinary approach to satisfying information compliance requirements and managing information risks while optimizing information value. This study aims to suggest the directions of implementing information governance in business firms based on analyses of Sedona Conference Principles of Information Governance. After analysing and reformulating the principles into control standards, and they are investigated and interpreted in terms of practicing information governance.

• Radiation Oncology Journal
• /
• v.34 no.2
• /
• pp.113-120
• /
• 2016

Purpose: The association between metabolism and cancer has been recently emphasized. This study aimed to find the prognostic significance of obesity in advanced stage rectal cancer patients treated with surgery and radiotherapy (RT). Materials and Methods: We retrospectively reviewed the medical records of 111 patients who were treated with combined surgery and RT for clinical stage 2-3 (T3 or N+) rectal cancer between 2008 and 2014. The prognostic significance of obesity (body mass index [BMI] ${\geq}25kg/m^2$) in local control was evaluated. Results: The median follow-up was 31.2 months (range, 4.1 to 85.7 months). Twenty-five patients (22.5%) were classified as obese. Treatment failure occurred in 33 patients (29.7%), including local failures in 13 patients (11.7%), regional lymph node failures in 5, and distant metastases in 24. The 3-year local control, recurrence-free survival, and overall survival rates were 88.7%, 73.6%, and 87.7%, respectively. Obesity (n = 25) significantly reduced the local control rate (p = 0.045; 3-year local control, 76.2%), especially in women (n = 37, p = 0.021). Segregation of local control was best achieved by BMI of $25.6kg/m^2$ as a cutoff value. Conclusion: Obese rectal cancer patients showed poor local control after combined surgery and RT. More effective local treatment strategies for obese patients are warranted.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.8
• /
• pp.3578-3585
• /
• 2012

The purpose of this study was to establish the critical limit at CCP (Critical Control Point) of HACCP (Hazard Analysis Critical Control Point) system for instant noodle and it was conducted at P company in Ichen(Gyeonggi-do), Korea. According to the CCP, Fried process were experimented to removal and decrease of microbiological and chemical hazards by measuring of each temperature and times. As a result, the standard plate count and pathogenic microorganism were not detected by fried processing (Temperature : $145{\pm}10^{\circ}C$, Time : $75{\pm}30$ sec). The acid value of chemical hazards produced by fried processing was able to manage, showed lower (0.2) than the legal limit (0.6). Air-borne bacterial examination results detected(3 CFU/mL, 3 CFU/mL) in the Frying Room and Steam Room. Therefore, the CCP-BC of fried process would be a great alternative to prevent and remove hazard analysis, such as general and pathogenic microorganism (E. coli O157:H7, B. cereus, Listeria monocytogenes, Salmonella spp, Sthaph. aureus etc), chemical hazard analysis. In conclusion, it suggested that HACCP plan was necessary for management standard and systematic approach in establishement of critical limit, solving the problem, method of verification, education and records management by fried processing.

• Journal of the Korean Society for Library and Information Science
• /
• v.33 no.4
• /
• pp.65-83
• /
• 1999

This study is intended to build a cross-reference system as syndetic device to provide bibliographic relations and to collocate variant access points through references, by developing a reference record format. To this end, the method of this study are as follows: First, the roles of references, which have long been used in traditional records, have been reviewed. Second, ways in which references are depicted not only by current cataloging rules but also by authority control systems are examined. Major characteristics of the reference record are summarized as fellows: 1) If variations either of an author name or of a title are made, or any related works are published, only a single reference record is created. This record uses existing authority records, and instead of adopting authority headings, it will expand the function of the explanatory reference as well as newly implementing a relational reference which can later be used as a reference record. 2) All the variations of identical personal or group names and of lilies are dealt as one access point. In place of current 'see' and 'see also' references, not drawing lines between authority heading(1XX field), 'see'(4XX field) and 'see also' reference(5XX field), all forms of names will be simply applied to record field '1XX'. 3) Any form of data elements, which are used as access points, will be described in '1XX' which has equal value. When a need arises to explain relationships between various access points, it can be met by applying the general explanation reference-name(666 field). Similarly, when there is a need to articulate bibliographic relationships between related works, they will be suggested through the title and relational reference. 4) The title and relational reference regulates related terms that each relation type contains its field, according to each relational type, by reclassifying entire fields in order to provide direct bibliographic relation types on reference records. 5) Pointers which are connected to each access point present reference control numbers.