• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.1
• /
• pp.199-204
• /
• 2011

This paper evaluates on the feasibility of MIL-STD-188-220 protocol as a medium access protocol over WNW(Wideband Network Waveform) by simulating and comparing with IEEE 802.11e-based protocol. WNW is newly designed waveform for next-generation broadband tactical communication system. This paper shows the feasibility of using the MIL-STD-188-220 protocol that shows better performance than IEEE 802.11e-based protocol on the particular environment.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.16 no.6
• /
• pp.247-251
• /
• 2021

We propose a protocol for Ethernet-based industrial real-time communication networks. In the protocol, the master periodically transmits control frames to all slaves, and the ring-type network topology is selected to achieve high-speed transmission speed. The proposed protocol is implemented in the form of both firmware and Linux kernel modules. To improve the transmission speed, the MAC address table is disabled in the firmware implementation, and the NAPI function of the Ethernet driver is removed in the Linux kernel module implementation. A network experiment environment is built with four ARM processor-based embedded systems and network operation experiments are performed for various frame sizes. From the experimental results, it is verified that the proposed protocol normally operates, and the firmware implementation shows better transmission speed than the Linux kernel module implementation.

• Journal of Communications and Networks
• /
• v.18 no.1
• /
• pp.75-83
• /
• 2016

In this paper, we propose a multi-channel medium access control (MAC) protocol, named underwater multi-channel MAC protocol (UMMAC), for underwater acoustic networks (UANs). UMMAC is a split phase and reservation based multi-channel MAC protocol which enables hosts to utilize multiple channels via a channel allocation and power control algorithm (CAPC). In UMMAC, channel information of neighboring nodes is gathered via exchange of control packets. With such information, UMMAC allows for as many parallel transmissions as possible while avoiding using extra time slot for channel negotiation. By running CAPC algorithm, which aims at maximizing the network's capacity, users can allocate their transmission power and channels in a distributed way. The advantages of the proposed protocol are threefold: 1) Only one transceiver is needed for each node; 2) based on CAPC, hosts are coordinated to negotiate the channels and control power in a distributed way; 3) comparing with existing RTS/CTS MAC protocols, UMMAC do not introduce new overhead for channel negotiation. Simulation results show that UMMAC outperforms Slotted floor acquisition multiple access (FAMA) and multi-channel MAC (MMAC) in terms of network goodput (50% and 17% respectively in a certain scenario). Furthermore, UMMAC can lower the end-to-end delay and achieves a lower energy consumption compared to Slotted FAMA and MMAC.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.4
• /
• pp.618-636
• /
• 1997

DQDB(Distributed Queue Dual Bus) protocol, the IEEE 802.6 standard protocol for metropolitan area networks, does not fully take advantage of the capabilities of dual bus architecture. Although fairness in bandwidth distribution among nodes is improved when using so called the bandwidth balancing mechanism, the protocol requires a considerable amount of time to adjust to changes in the network load. Additionally, the bandwidth balancing mechanism leaves a portion of the available bandwidth unused. In a high-speed backbone network, each node may act as a bridge/ router which connects several LANs as well as hosts. However, Because the existence of high speed LANs becomes commonplace, the congestionmay occur on a node because of the limitation on access rate to the backbone network and on available buffer spaces. to release the congestion, it is desirable to install some congestion control algorithm in the node. In this paper, we propose an efficient congestion control mechanism and fair and waster-free MAC protocol for dual bus network. In this protocol, all the buffers in the network can be shared in such a way that the transmission rate of each node can be set proportional to its load. In other words, a heavily loaded node obtains a larger bandwidth to send the sements so tht the congestion can be avoided while the uncongested nodes slow down their transmission rate and store the incoming segments into thier buffers. this implies that the buffers on the network can be shared dynamically. Simulation results show that the proposed probotol significantly reduces the segment queueing delay of a heavily loaded node and segment loss rate when compared with original DQDB. And it enables an attractive high throughput in the backbone network. Because in the proposed protocol, each node does not send a requet by the segment but send a request one time in the meaning of having segments, the frequency of sending requests is very low in the proposed protocol. so the proposed protocol signigificantly reduces the segment queuing dely. and In the proposed protocol, each node uses bandwidth in proportion to its load. so In case of limitation of available buffer spaces, the proposed protocol reduces segment loss rate of a heavily loaded node. Bandwidth balancing DQDB requires the wastage of bandwidth to be fair bandwidth allocation. But the proposed DQDB MAC protocol enables fair bandwidth without wasting bandwidth by using bandwidth one after another among active nodes.

• Proceedings of the KIEE Conference
• /
• 1999.11c
• /
• pp.649-651
• /
• 1999

This paper presents SNMP remote management system for power plants using micro-controller. Control board supporting LAN-based remote monitor and control is produced and MMI program on PC is also constructed. To expand into Internet, SNMP(Simple Network Management Protocol), the standard network management protocol of TCP/IP protocol suite, is ported to this control board consisted of micro-controller, 80c196KC, and LAN controller, Am7990DC. To overcome the constraints of CPU performance and memory capacity, TCP/P protocol suite is simplified and informations needed to management were implemented in accordance with MIB(Management Information Base) specified in RFC. Also monitoring software is constructed by Visual Basic.

• International Journal of Internet, Broadcasting and Communication
• /
• v.8 no.4
• /
• pp.1-10
• /
• 2016

This paper considers WiMedia UWB network based wireless ship area network (WSAN) so as to support high-quality multimedia video data services and important shipboard control data. In this paper, prioritized contention access (PCA) and distributed reservation protocol (DRP) based on WiMedia UWB (ECMA-368) MAC protocols are combined and proposed to support mixed high-quality video traffic and shipboard control data traffic applying varying DRP and PCA data periods according to channel condition and link parameter ptimization. It is shown that the proposed dynmaic channel allocation of WiMedia UWB MAC protocol can provide reliable mixed video and shipboard control data traffic as well.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2619-2621
• /
• 2001

This study proposes a new efficient MAC(media access control) protocol to establish the ultrasonic communication network for under water vehicles, which ensures a certain level of maximum throughput regardless of the propagation delay of ultrasonic and allows fast data transmission through the multiple ultrasonic communication channel. In this study, a media access control protocol for underwater communication network that allows 'peer-to-peer' communication between a surface ship and multiple underwater system is designed, and the proposed control protocol is implementde for its verification.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.88-92
• /
• 1999

This paper aims at developing remote contro system to control and monitor distributed various devices through internet or information communication network. SNMP (Simple Network Management Protocol) and rectifier operated in a row are adopted for network management protocol and applied device, respectively. For controlling and monitoring distributed devices in real-time java-environment software is constructed. Also general-use interface controller between network device and applied device is proposed. Finally, seria communication such as RS-232 and RS-485 is used between controller and applied device.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.05a
• /
• pp.189-194
• /
• 2002

It is thesis that based on for Croup-Transferring a method of Transferring-Control during real-time. By the development of multimedia, spread of high-speed communication network and generalization of various multimedia services, various techniques an studied by requiring application services for multi-users (meeting-service, remote-service, broadcasting-service, education-service and so on). So we focused on the multimedia group transferring techniques except communication network techniques and multimedia processing techniques, and presented algorithms about a mettled of group-management, a method of delay-control-management that analyzed a effective method of Croup-Control and characters of each group network and used RTP(Real-Time Protocol) / RTCP(Real-Time Control Protocol).

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.10
• /
• pp.1018-1023
• /
• 2010

The CAN (Controller Area Network) system is the most dominant protocol for in-vehicle networking system because it provides bounded transmission delay among ECUs (Electronic Control Units) at data rates between 125Kbps and 1Mbps. And, many automotive companies have chosen the CAN protocol for their in-vehicle networking system such as chassis network system because of its excellent communication characteristics. However, the increasing number of ECUs and the need for more intelligent functions such as ADASs (Advanced Driver Assistance Systems) or IVISs (In-Vehicle Information Systems) require a network with more network capacity and the real-time QoS (Quality-of-Service). As one approach to enhancing the network capacity of a CAN system, this paper introduces a CAN system with dual communication channel. And, this paper presents a distributed message allocation method that allocates messages to the more appropriate channel using forecast traffic of each channel. Finally, an experimental testbed using commercial off-the-shelf microcontrollers with two CAN protocol controllers was used to demonstrate the feasibility of the CAN system with dual communication channel using the distributed message allocation method.