• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.1
• /
• pp.204-209
• /
• 2010

Idle listening is very critical source of energy dissipation in wireless sensor networks. To reduce idle listening, we propose preamble sampling MAC that is named EESP-MAC. The main idea of EESP-MAC is to add control information into the short preamble frame. So the stream of short preambles is used not only for preamble sampling but also for avoiding overhearing, decreasing control packet overhead and reducing the listening of the redundant message, caused by message-flooding.

• International Journal of Control, Automation, and Systems
• /
• v.4 no.1
• /
• pp.70-76
• /
• 2006

The objective of this paper is to propose a reference model of a fire detection and monitoring system using MS/TP protocol. The reference model is designed to satisfy the requirements of response time and flexibility. The reference model is operated on the basis of BACnet, a standard communication protocol for building automation systems. Validity of the reference model was examined using a simulation model. This study also evaluated the performance of the BACnet-based fire detection and monitoring system in terms of network-induced delay. Simulation results show that the reference model satisfies the requirements of the fire detection and monitoring system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.2 no.3
• /
• pp.325-333
• /
• 1998

In this paper, conventional STM(Synchronous Transfer Mode) supports another traffics by using idle channels. Proposed mobile terminals are distributed independently at the BSA(Basic Service Area). So, MAC(Medium Access Control) specified on the wireless ATM networks, which is managing statistics multiplewing functions, idle channel's ultilization is maximized and multimedia service characteristic for conventional wired networks based fixed assignment scheme(connection-oriented) and random assignment scheme(connection-oriented) improving on dynamic reservation based MAC protocol.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1998.05a
• /
• pp.132-137
• /
• 1998

In this paper, conventional STM(Synchronous Transfer Mode) supports another traffics by using idle channels Proposed mobile terminals are distributed independently at the BSA(Basic Service Area). So, MAC(Medium Access Control) specified on the wireless ATM networks, which is managing statistics multiplexing functions, idle channel's utilization is maximized and multimedia service characteristic for conventional wired networks based fixed assignment scheme(connection-oriented) and random assignment scheme(connectionless) improving on dynamic reservation based MAC protocol.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.04d
• /
• pp.331-333
• /
• 2003

본 논문에서는 802.11을 기반으로 한 무선 링크에서 인터넷 상의 대표적인 전송계층 프로토콜인 TCP(Transmission Control Protocol)와 HDP(User Datagram Protocol)의 성능을 비교한다. 또한 이들 프로토콜이 무선 환경에서 보이는 문제점을 지적하고 원인을 분석한다. 무선 네트워크의 용량은 유선 네트워크와 다르며, 따라서 유선 네트워크 용량을 기반으로 설계된 TCP는 불안정하게 작동한다. 본 논문에서는 주목할만한 전송 프로토콜의 병목현상을 나타내는 원인으로 MAC(Medium Access Control)에 의해 채널을 잡기 위한 경쟁이 심각함과 전송 계층 프로토콜의 네트워크 용량 예측이 올바르지 않음을 지적하고, TCP와 HDP를 비교하여 무선 망에서도 네트워크 상황에 적응하는 기법이 중요함을 확인한다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.9
• /
• pp.1633-1637
• /
• 2008

A protocol is proposed to control the rate of each subcarrier in OFDM-based wireless network systems. The proposed protocol adds an OFDM symbol in CTS frame defined in IEEE 802.11 standard. A receiver determines the rate of its subcarrier after it receives the RTS frame. The determined rate is added to OFDM symbol in CTS frame. In order to synchronize the rate information between the sender and the receiver, error recovery process is proposed. The performance improvement of the proposed method is shown by numerical results.

• Journal of Korea Society of Industrial Information Systems
• /
• v.27 no.6
• /
• pp.41-49
• /
• 2022

The Internet Engineering Task Force (IETF) has standardized RPL (IPv6 Routing Protocol for Low-power Lossy Network) as a routing protocol for Low Power and Lossy Networks (LLNs), a low power loss network environment. RPL creates a route through an Objective Function (OF) suitable for the service required by LLNs and builds a Destination Oriented Directed Acyclic Graph (DODAG). Existing studies check the residual energy of each node and select a parent with the highest residual energy to build a DODAG, but the energy exhaustion of the parent can not avoid the network disconnection of the children nodes. Therefore, this paper proposes EC-RPL (Enhanced Connectivity-RPL), in which ta node leaves DODAG in advance when the remaining energy of the node falls below the specified energy threshold. The proposed protocol is implemented in Contiki, an open-source IoT operating system, and its performance is evaluated in Cooja simulator, and the number of control messages is compared using Foren6. Experimental results show that EC-RPL has 6.9% lower latency and 5.8% fewer control messages than the existing RPL, and the packet delivery rate is 1.7% higher.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.865-870
• /
• 2003

A motion controller has been used variously in industry such as semiconductor manufacture equipment, industrial robot, assembly/conveyor line applications and CNC equipment. There are several types of controller in motion control. One of these is a PC-based motion controller such as PCI or ISA, and another is stand-alone motion controller. The PC bus-based motion controller is popular because of improving bus architectures and GUI (Graphic User Interface) that offer convenience of use to user. There are some problems in this. The PC bus-based solution allows for only one of the form factors, so it has a poor flexibility. The overall system package size is bigger than other motion control system. And also, additional axes of control require additional slot, however the number of slots is limited. Furthermore, unwieldy and many wirings come to connect plants or I/O. The stand-alone motion controller has also this limit of axes of control and wiring problems. To resolve these problems, controller must have capability of operating as stand-alone devices that resides outside the computer and it needs network capability to communicate to each motion device. In this paper, a network-based stand-alone motion system is proposed. This system integrates PC and motion controller into one stand-alone motion system, and uses CAN (Controller Area Network) as network protocol. Single board computer that is type of 3.5" FDD form factor is used to reduce the system size and cost. It works with Windows XP Embedded as operating system. This motion system operates by itself or serves as master motion controller that communicates to slave motion controller. The Slave motion controllers can easily connect to master motion system through CAN-network.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.5
• /
• pp.916-922
• /
• 2001

A medium access control protocol is proposed for integrated voice and data services in the packet CDMA network with a small coverage. Uplink channels are composed of time slots and multiple spreading codes for each slot. This protocol gives higher access priority to the delay-sensitive voice traffic than to the data traffic. During a talkspurt, voice terminals reserve a spreading code to transmit multiple voice packets. On the other hand, whenever generating a data packet, data terminals transmit a packet based on the status Information of spreading codes in the current slot, which is received from base station. In this protocol, voice packet does not come into collision with data packet. Therefore, this protocol can increase the maximum number of voice terminals.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.9
• /
• pp.789-800
• /
• 2014

In this paper, we propose a cooperative protocol of relay-based WUSB/DRD and WLP device in WSS of ship area WiMedia environment. For this purpose, we investigate a RNT table configuration and algorithm of RNS relay node used in relay-based cooperative communication. Then, we describe a device that makes up WLP network and propose a cooperative protocol for WUSB/DRD/WLP device communication. The proposed cooperative protocol can communicate with WUSB/DRD/WLP devices by using standard DRP reservation and WUSB DRP reservation.