• Journal of Korea Multimedia Society
• /
• v.20 no.2
• /
• pp.254-260
• /
• 2017

Data packets from sensor nodes scattered over measuring fields are generally forwarding to the sink node, which may be connected to the wired networks, in a wireless sensor network. So many data packets are gathered near the sink node, resulting in significant data packet collisions and severe transmission latency. In an event detection application such as object tracking and military, bursty data is generated when an event occurs. So many data packet should be transmitted in a limited time to the sink node. In this paper, we present a delay efficient and bursty traffic friendly MAC protocol called DEBF-MAC protocol for wireless sensor networks. The DEBF-MAC uses a slot-reserved mechanism and sleep period control method to send multiple data packets efficiently in an operational cycle time. Our simulation results show that DEBF-MAC outperforms DW-MAC and SR-MAC in terms of energy consumption and transmission delay.

• ETRI Journal
• /
• v.29 no.1
• /
• pp.116-119
• /
• 2007

In this letter, we design a collision resolution protocol for optical burst switching ring networks to avoid burst collision. We define the offset time condition for no burst transmission collision and manage the free time list of nodes for no burst reception collision. In order to improve the throughput, we use a fiber delay line, void-filling, and void-compression. This protocol does not require any additional procedures for bandwidth reservation such as centralized assignment of bandwidth, lightpath setup of WDM ring networks, or token capturing for the burst transmission. The simulation results show that the proposed protocol can achieve high throughput while saving 70% of wavelengths when compared to round robin with random selection, round robin with persistent, and round robin with non-persistent with only destination delay.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.231-234
• /
• 2003

In this paper, we propose the enhanced CSMA/CA MAC protocol fir mobile multi-hop wireless Ad-hoc networks. In the conventional wireless Ad-hoc network such as WLAN using CSMA/CA MAC protocol, communications between terminals that fn connected within multi-hop node may degrade the transmission efficiencies as increasing the multi-hop nodes because of RTS-CTS-DATA-ACK message exchange between terminals. In this raper, we apply the ACK/RTS control message into multi-hop transmission between terminals for wireless ad-hoc networks and improve the data traffic transmission efficiencies compared with conventional CSMA/CA MAC protocol used in WLAN.

• Journal of information and communication convergence engineering
• /
• v.5 no.3
• /
• pp.181-184
• /
• 2007

In this paper, a CSSMA/AI MAC protocol in packet CDMA network is presented. The main features of this protocol are the code status sensing and reservation for reducing the packet collision. The base station broadcasts the code status on a frame-by-frame basis just before the beginning of each preamble transmission, and the mobile station transmits a preamble for reserving a code based on the received code status. After having transmitted the preamble, the mobile station listens to the downlink of the selected code and waits the base station reply. If this reply indicates that the code has been correctly acquired, it continues the packet transmission for the rest of the frame. If there are other packets waiting for transmission, the base station broadcasts the status of the code as reserved, and the mobile station transmits a packet on a reserved code for the successive frames.

• Journal of Digital Contents Society
• /
• v.4 no.2
• /
• pp.203-210
• /
• 2003

In this paper we proposed a new MAC protocol to improve QoS(Quality of Service) for real-time traffic in wireless Ad Hoc networks. NMAC protocol have a contention period reservation scheme and a priority control scheme to provide fairness of nodes and QoS. Through simulation, the NMAC protocol compared with existing CSMA MAC protocols shows improvement in performance.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.1
• /
• pp.39-47
• /
• 2016

In this paper, we propose vehicle SoC fault diagnosis platform using FlexRay protocol in order to detect the faults of semiconductor control chip even after vehicle production. Before FlexRay protocol by sending NFI (Null Frame Indicator) bit among the header segment and a specific identifier in the payload segment of FlexRay frame, this technique can be distinguishable from normal mode and test mode. By using this technique, it is possible to detect the faults such as performance degradation of vehicle network system caused by the aging or several problems of vehicle semiconductor chip. Also high reliability and safety of vehicle can be maintained by using structural test for vehicle SoC fault detection.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.57.6-57
• /
• 2001

Jitter occurring during data communication creates difficulties in integrating a system. Such problems arise from using an event triggered communication protocol such as CAN(Controller Area Network) because it cannot be determined when a specific message will be transmitted. In order to avoid this problem, several time triggered communication protocols have been developed orare under development. Those protocols include TTP(TTTech) and TTCAN(BOSCH). But a time triggered communication protocol needs more hardware than an event triggered protocol and has more complicated software algorithm because data and time information goes through the existing data line ...

• Journal of Advanced Information Technology and Convergence
• /
• v.10 no.2
• /
• pp.83-90
• /
• 2020

A protocol HMNR, was proposed to utilize control information of every other process piggybacked on each sent message for minimizing the number of forced checkpoints. Then, an improved protocol, called Lazy-HMNR, was presented to lower the possibility of taking forced checkpoints incurred by the asymmetry between checkpointing frequencies of processes. Despite these two different minimization techniques, if the high message interaction traffic occurs, Lazy-HMNR may considerably lower the probability of knowing whether there occurs no Z-cycle due to its shortcomings. Also, we recognize that no previous work has smart procedures to be able to utilize network infrastructures for highly decreasing the number of forced checkpoints with dependency information carried on every application message. We introduce a novel Lazy-HMNR protocol for group communication-based distributed computing systems to cut back the number of forced checkpoints in a more effective manner. Our simulation outcomes showed that the proposed protocol may highly lessen the frequency of forced checkpoints by comparison to Lazy-HMNR.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.4
• /
• pp.313-319
• /
• 2000

As the interest of flexible manufacturing systems and computer integrated manufacturing systems increase, the distribution of centralized control systems using industrial control networks is getting more attention. In this paper, we investigate the rate-based traffic control of industrial control networks to improve the performance regarding the throughput, fairness, and error rates. Especially, we consider the protocol of Lon-$Works^{(TM)}$ which consists of all OSI 7-layers and supports various communication media at a low cost. Basically, the proposed rate-based traffic control system is closed loop by utilizing the feedback channel errors, which shows improved performance when compared with other industrial control networks commonly operated in open loop. To this end, an additional network node called monitoring node is introduced to check the channel status without increasing the channel load. The Proposed control loop is in effect whenever the feedback channel error becomes greater than an admittable value. We demonstrate the improved performance of the controlled network system in view of throughput and fairness measures by implementing the lab-scale network system based on LonWorks and through the experimentation upon it.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.695-698
• /
• 2007

The control of electrical appliances residing in the home network can be accomplished via Internet with the UPnP expansion without modifying an existing UPnP. In this paper, we propose the Internet Gateway that consists of an UPnP IGD(Internet Gateway Device) DCP(Device Control Protocol) and an UPnP Bridge as a system to control electrical appliances of home network. UPnP IGD DCP is to enable the configurable initiation and sharing of Internet connections as well as assuring advanced connection-management features and management of host configuration service. It also supports transparent Internet access by non-UPnP-certified devices. UPnP Bridge searches for local home network devices by sending control messages, while control point of UPnP Bridge looks up devices of interest on the Internet, subsequently furnishing the inter-networking controlling among devices which belong to different home network systems. With our approach, devices on one home network can control home electrical appliances on the other hone network via Internet through IGD DCP with control commands of UPnP.