• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.3
• /
• pp.31-39
• /
• 2012

In this paper, we propose an energy-aware source routing protocol for maximizing a network lifetime in mobile ad hoc network environments. The proposed routing protocol is based on the source routing and chooses a path that maximize the path lifetime, by considering both transmit/receive power consumption and residual battery power in the mobile nodes from the perspective of source-destination end-to-end. This paper proposes a new routing cost and designs a new routing protocol for minimizing the control packet overhead occurred during the route discovery. Simulation results show that the proposed scheme has similar performances to the conventional routing schemes in terms of the number of transmission hops, transmission rate and total energy consumption, but achieves the performance improvement of 20 percent with respect to the lifetime.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.3
• /
• pp.586-597
• /
• 2004

MAC (Medium Access Control) protocol is necessary for a OLT (Optical Line Termination) to allocate bandwidth to ONUs (Optical Network Units) dynamically in ATM PON (Passive Optical Network) operated in a kind of optical subscriber network having tree topology. The OLT collect information about ONUs and provide all permission with each ONU effectively by means of MAC protocol. Major functions of MAC protocol are composed of the algorism for distributing permission demanded by a ONU dynamically and allocation all permission used in APON properly. Sometimes MAC get to be a element of limiting the whole operation speed and occupy a most frequent operation part of the TC (Transmission Convergence) function module so it have to be designed to guarantee the best quality for each traffic. This paper introduce the way of implementation of a algorism which satisfy all of the upper renditions. This MAC algorism allocate bandwidth according to a number of working ONU and the information of the queue length dynamically and distribute permission for same interval to minimize delay variation of each ONU cell. MAC scheduler for the dynamic bandwidth allocation which is introduced in this paper has look-up table structure that makes programming possible. This structure is very suitable for implementation and operated in high speed because it require very simple and small chip size.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.9
• /
• pp.638-643
• /
• 2004

Middleware enables different networking devices and protocols to inter-operate in ubiquitous home network environments. The UPnP(Universal Plug and Play) middleware, which runs on a PC and is based on the IPv4 protocol, has attracted much interest in the field of home network research since it has versatility The UPnP, however, cannot be easily accessed via the public Internet since the UPnP devices that provide services and the Control Points that control the devices are configured with non-routable local private or Auto IP networks. The critical question is how to access UPnP network via the public Internet. The purpose of this paper is to deal with the non-routability problem in local private and Auto IP networks by improving the conventional Control Point used in UPnP middleware-based home networks. For this purpose, this paper proposes an improved Control Point for accessing and controlling the home network from remote sites via the public Internet, by adding a web server to the conventional Control Point. The improved Control Point is implemented in an embedded GNU/Linux system running on an ARM9 platform. Also this paper implements the security of the home network system based on the UPnP (Universal Plug and Play), adding VPN (Virtual Private Network) router that uses the IPsec to the home network system which is consisted of the ARM9 and the Embedded Linux.

• Proceedings of the IEEK Conference
• /
• 2000.07b
• /
• pp.600-603
• /
• 2000

In this paper, we propose the design method of distributed control system using Controller Area Network (CAN). CAN is an advanced serial communication protocol for distributed real-time control systems. It is a contention-based multi-master network whose timeliness properties come from its collision resolution algorithm which gives a high schedulable utilization and guaranteed bus access latency. With proposed method using CAN, we apply to robot controller. The effectiveness of proposed method is demonstrated by the simulation and experiment.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.7
• /
• pp.26-40
• /
• 2010

We propose a new routing protocol, MCQosR, that is based on bandwidth estimation, admission control, and a routing metric, MCCR - suitable for wireless ad-hoc networks with multiple radios and channels. To use the full capacity of a wireless link, we assume a node with multiple radios for full duplex operation, and a radio using multiple channels to exclude route-intra interference. This makes it possible to use the capacity of a wireless link. Then, to provide bandwidth and delay guarantee, we have a radio with a fixed channel for layer-3 data reception at each node, used to estimate the available bandwidth and expected delay of a wireless link. Based on the estimate of available bandwidth and delay, we apply the call admission control to a new call requiring bandwidth and delay guarantee. New calls with traffic that will overflow link or network capacity are rejected so the accepted calls can use the required bandwidth and delay. Finally, we propose a routing metric, MCCR, which considers the channel contentions and collisions of a wireless link operating in CSMA/CA. MCCR is useful for finding a route with less traffic and distributing traffic over the network to prevent network congestion as much as possible. The simulation of the MCQosR protocol and the MCCR metric shows traffic is distributed and guaranteed service is provided for accepted calls.

• The KIPS Transactions:PartC
• /
• v.9C no.2
• /
• pp.197-212
• /
• 2002

Transmission Control Protocol (TCP) [1] has been tuned as a reliable transfer protocol for traditional networks comprising wired links and stationary hosts with same link characteristics. TCP assumes that congestion in the network be a primary cause for packet losses and unusual delays. TCP performs welt over such networks adapting to end-to-end delays and congestion losses, by standard congestion control mechanisms, such as slow-start, congestion avoidance, fast retransmit and recovery. However, networks with wireless and other lossy links suffer from significant losses due to bit errors and handoffs. An asymmetry network such as ADSL has different bandwidth for both directions. As a result, TCP's standard mechanisms incur end-to-end performance degradation in various links. In this paper, we analyze the TCP problems in wireless, satellite, and asymmetry links, and measure the new TCP mechanisms that are recommended by IETF Performance Implications of Link Characteristics (PILC) WG[2], by using Network Simulator 2 (NS-2).

• Journal of Electrical Engineering and Technology
• /
• v.3 no.2
• /
• pp.285-291
• /
• 2008

Active Queue Management(AQM) has been widely used for congestion avoidance in Transmission Control Protocol(TCP) networks. Although numerous AQM schemes have been proposed to regulate a queue size close to a reference level, most of them are incapable of adequately adapting to TCP network dynamics due to TCP's non-linearity and time-varying stochastic properties. To alleviate these problems, we introduce an AQM technique based on a dynamic neural network using the Back-Propagation(BP) algorithm. The dynamic neural network is designed to perform as a robust adaptive feedback controller for TCP dynamics after an adequate training period. We evaluate the performances of the proposed neural network AQM approach using simulation experiments. The proposed approach yields superior performance with faster transient time, larger throughput, and higher link utilization compared to two existing schemes: Random Early Detection(RED) and Proportional-Integral(PI)-based AQM. The neural AQM outperformed PI control and RED, especially in transient state and TCP dynamics variation.

• Proceedings of the IEEK Conference
• /
• 2000.06c
• /
• pp.149-152
• /
• 2000

In the Internet, multimedia data transfer is hard to guarantee the characteristics of the Real-Time because of the Best-Effort of the nature of IP, then additional mechanism is applied to multimedia application for real-time data. In this paper, we introduce the nature of multimedia and the necessary facility for real-time protocol. We propose protocol layer, which has necessary function above mentioned and offer the end-to-end transfer far real-time data. Also, the proposed protocol perform a next low operation: 1) a required information for QoS control by using Feedback mechanism is obtained from sender, 2) divided a transferred packet by delay and loss priority. 3) recognized the low service models, and 4) decided a bandwidth and QoS according to a network state

• Convergence Security Journal
• /
• v.2 no.2
• /
• pp.1-8
• /
• 2002

Real-Time Protocol (RTP) is used for multimedia information transmission and RTP payload must be encrypted for providing multimedia information security. Encryption/decryption delay is minimized, because there are constraints in transporting a multimedia data through the Internet. Therefore, encryption algorithm is changed with considering network traffic and load. Doting many users participate in the same multimedia service, an user who already left the service can receive and decrypt the RTP payload because of knowing the encryption key. In this paper, Security Control Protocol for RTP is designed and implemented for changing the encryption algorithm and the key.

• Convergence Security Journal
• /
• v.2 no.1
• /
• pp.49-57
• /
• 2002

Real-Time Protocol (RTP) is used for multimedia information transmission and RTP payload must be encrypted for providing multimedia information security. Encryption/decryption delay is minimized, because there are constraints in transporting a multimedia data through the Internet. Therefore, encryption algorithm is changed with considering network traffic and load. During many users participate in the same multimedia service, an user who already left the service can receive and decrypt the RTP payload because of knowing the encryption key. In this paper, Security Control Protocol for RTP is designed and implemented for changing the encryption algorithm and the key.