• Journal of KIISE
• /
• v.41 no.10
• /
• pp.824-831
• /
• 2014

HTTP (Hypertext Transfer Protocol) Adaptive Streaming is gaining attention because it changes bitrates to adapt changing network conditions. Since HAS (HTTP Adaptive Streaming) client downloads the video data based on TCP (Transmission Control Protocol), it estimates incorrectly the available bandwidth and leads to an unnecessary video quality change in long-delay networks. In this paper, we propose a buffer-based quality control scheme in order to improve the service quality and smooth playback in the HAS. The proposed scheme estimates accurately the available bandwidth based on a modified streaming model that considers network delay. It also calculates the sustainability of the video quality to prevent an unnecessary quality change and determines the inter-request time on the basis of the buffer status. Through the simulation, we prove that our scheme improves the QoS (Quality of Service) of the HAS service and controls the video quality smoothly in long-delay networks.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2169-2171
• /
• 2001

The vacuum gauge control system has been designed and implemented using multi-serial communication controllers (MSCC) for the 2.5 Gev storage ring at the Pohang Accelerator Laboratory (PAL). There are 20 Balzers vacuum gauges and 17 Granville-Phillips vacuum gauges at the storage ring. A MSCC have two RS485 (max speed 460.8Kbps) field network port, 8 channel serial communication ports (max speed 460.8Kbps) connected to gauge controller for serial communication control. 12 MSCCs are connected to a personal computer (PC) through the RS485 field network. The PC can automatically control the MSCCs by sending set of commands through the network. The commands specify the duration of the MODBUS protocol. Upon receiving a command from a PC running under Windows2000 through the network, the MSCC communicate through the serial output ports to gauge controller. In this paper, we describe control structure and scheme of the vacuum gauge control system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.10B
• /
• pp.955-963
• /
• 2009

In this paper, we propose a medium access control(MAC) protocol for reducing the energy efficiency and for improving the transmission efficiency in underwater acoustic sensor networks. In underwater environment, the transmission delay is longer and bandwidth is smaller than terrestrial environment. Considering these points, we propose a new MAC protocol to enhance throughput and to manage efficiently the energy of nodes. The proposed protocol operates as a channel reservation scheme to decrease data collisions, and uses a mechanism to control the hidden node problem and the exposed node problem occurred in ad hoc networks. The proposed protocol consists of the slotted based transmission frame and reduces data collisions between nodes by putting separately the reservation period in the transmission frame. In addition, it is able to solve the hidden node problem and the exposed node problem by reservation information between nodes. We carry out the simulation to evaluate the proposed protocol in terms of the average energy consumption, the ratio of collision, throughput, and the average transmission delay, and compare the proposed protocol to a traditional MAC protocol in the underwater environment. The simulation results show that the proposed protocol outperforms the traditional protocol under a various of network parameters.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.7
• /
• pp.1547-1568
• /
• 2013

Wireless body area network (WBAN) is an emerging short-range wireless communication network with sensor nodes located on, in or around the human body for healthcare, entertainment and ubiquitous computing. In WBANs, energy is severely constrained which is the prime consideration in the medium access control (MAC) protocol design. In this paper, we propose a novel MAC protocol named Energy-efficient Relay MAC with dynamic Power Control (ERPC-MAC) to save energy consumption. Without relying on the additional devices, ERPC-MAC employs relaying nodes to provide relay service for nodes which consume energy fast. Accordingly the superframe adjustment is performed and then the network topology can be smoothly switched from single-hop to multi-hop. Moreover, for further energy saving and reliability improvement, the dynamic power control is introduced to adjust the power level whenever a node transmits its packets to the coordinator or the relaying node. To the best of the authors' knowledge, this is the first effort to integrate relay, topology adjustment and power control to improve the network performance in a WBAN. Comprehensive simulations are conducted to evaluate the performance. The results show that the ERPC-MAC is more superior to the existing standard and significantly prolongs the network lifetime.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.746-748
• /
• 2011

MANET(Mobile Ad-hoc Network) is a self-configuration network or wireless multi-hop network based on inference topology. The proposed ATICC(Adaptive Time Interval Clustering Control) algorithm for hierarchical cluster based MANET. The proposed ATICC algorithm is time interval control technique for node management considering the attribute of node and network traffic. ATICC could be made low the network traffic. Also it could be improving the network life time by using timing control method.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.7
• /
• pp.655-660
• /
• 2010

As increasing the number of Electronic Control Units in a vehicle, the proportion for reliability and stability of the software is going increasingly. Accordingly, the traditional CAN network has occurred the situation that the requirement of developing vehicle software is not sufficient. To solve these problems, the FlexRay network which is ensured the high bandwidth and real-time is generated. However it is difficult to implement FlexRay based application software because of complex protocol than traditional CAN network. Accordingly the system for analysis and verification of network state is needed. Also vehicle vendor develops application software using Matlab/Simulink in order to increase productivity. But this development method is hard to solve the network problem of node to node. Therefore this paper implements Matlab/Simulink based FlexRay network system and verifies it through comparing with existing embedded system.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.5
• /
• pp.40-52
• /
• 2010

A mobile ad hoc network is instant and heuristic, and it is also vulnerable and volatile. Since topology and route changes are frequent, no single routing protocol designed for a conventional network performs well. Some protocols suffer from significant performance degradation when the number of nodes increases, or when nodes become highly mobile. In this paper we investigate a way to adaptively select a routing protocol that fits to the real-time network conditions. The first phase of our study is to analyze the performances of two classes of routing protocols under various network scenarios. The second phase consists of constructing a routing protocol selection reference. All nodes continue to monitor the status of neighbor nodes and control packets exchanged. Then, the aggregated information is periodically compared against the protocol selection reference. The selected routing protocol is maintained throughout the network until the network property changes substantially. The performance of the proposed algorithm is verified by a set of computer simulations using the OPNET modeler. The experimental results show that selectively changing routing protocol adaptive to the network conditions greatly improves the efficacy of bandwidth utilization.

• Journal of Information Processing Systems
• /
• v.2 no.1
• /
• pp.39-43
• /
• 2006

In this paper, we proposed TASL-MAC, a medium-access control (MAC) protocol for wireless sensor networks. In wireless sensor networks, sensor nodes are usually deployed in a special environment, are assigned with long-term work, and are supported by a limited battery. As such, reducing the energy consumption becomes the primary concern with regard to wireless sensor networks. At the same time, reducing the latency in multi-hop data transmission is also very important. In the existing research, sensor nodes are expected to be switched to the sleep mode in order to reduce energy consumption. However, the existing proposals tended to assign the sensors with a fixed Sleep/Listening schedule, which causes unnecessary idle listening problems and conspicuous transmission latency due to the diversity of the traffic-load in the network. TASL-MAC is designed to dynamically adjust the duty listening time based on traffic load. This protocol enables the node with a proper data transfer rate to satisfy the application's requirements. Meanwhile, it can lead to much greater power efficiency by prolonging the nodes' sleeping time when the traffic. We evaluate our implementation of TASL-MAC in NS-2. The evaluation result indicates that our proposal could explicitly reduce packet delivery latency, and that it could also significantly prolong the lifetime of the entire network when traffic is low.

• Journal of Industrial Technology
• /
• v.21 no.A
• /
• pp.189-198
• /
• 2001

In recent years, the predominant part in telecommunications is mobile communications. The next generation network is extending today's voice-only mobile networks to multi-service networks. ATM Network is possible to carry such multi-media traffic and it will be expect to use wireless ATM for the future mobile access network. One of manly important aspects for the performance of wireless ATM is the Medium Access Control (MAC) protocol. The MAC protocol must be able to satisfyingly handle the different ATM services (CBR, VBR, ABR and UBR) with their radically different performance requirements. Additionally, the MAC protocol must be able to cope with the complex radio environment where fading, multi-path propagation interference and burst-errors further complicate the situation. In this paper, a dynamic slot allocation algorithm in wireless ATM is proposed for an efficient channel sharing/media access at the MAC layer. We use equivalent capacity in the allocation of slots for VBR traffic which is variable along the time. It is simple and effective slot allocation method for VBR service. In particular, we consider the slot allocation of a session consisted of several connections for requirement of multimedia traffic. Simulation shows that the cell loss ratio is reduced by re-allocation of extra slots in Mobile Terminal (MT).

• Journal of IKEEE
• /
• v.10 no.2 s.19
• /
• pp.123-127
• /
• 2006

An Ad-hoc network which is composed of mobile nodes only should be able to distribute the traffic load evenly to the network so that the network could utilize its resources effectively However, most of researches have been concentrated in channel establishment level, not in channel reestablishment level. In this paper, the existing AODV routing protocol has been modified and upgraded to disperse the traffic load more quickly A node which uses the modified AODV routing protocol proposed in this paper broadcasts a control message to adjacent nodes, which announces congestion around the node. In order to verify the performance improvement of the proposed protocol, simulation study has been carried out by using ns2 simulator.