Journal of Institute of Control, Robotics and Systems (제어로봇시스템학회논문지)

Institute of Control, Robotics and Systems (제어로봇시스템학회)
권호 표지
DOI QR코드

DOI QR Code

Implementation and Verification of FlexRay Network System using Matlab/Simulink

매틀랩/시뮬링크 기반 플렉스레이 네트워크 시스템의 구현 및 검증

  • 윤승현 (성균관대학교 전자전기컴퓨터공학부) ;
  • 서석현 (성균관대학교 전자전기컴퓨터공학부) ;
  • 황성호 (성균관대학교 기계공학부) ;
  • 권기호 (성균관대학교 전자전기컴퓨터공학부) ;
  • 전재욱 (성균관대학교 전자전기컴퓨터공학부)
  • Received : 2010.03.15
  • Accepted : 2010.04.30
  • Published : 2010.07.01
Download PDF
⟨ Previous Next ⟩

Abstract

As increasing the number of Electronic Control Units in a vehicle, the proportion for reliability and stability of the software is going increasingly. Accordingly, the traditional CAN network has occurred the situation that the requirement of developing vehicle software is not sufficient. To solve these problems, the FlexRay network which is ensured the high bandwidth and real-time is generated. However it is difficult to implement FlexRay based application software because of complex protocol than traditional CAN network. Accordingly the system for analysis and verification of network state is needed. Also vehicle vendor develops application software using Matlab/Simulink in order to increase productivity. But this development method is hard to solve the network problem of node to node. Therefore this paper implements Matlab/Simulink based FlexRay network system and verifies it through comparing with existing embedded system.

Keywords

References

  1. G. Leen and D. Herrernam, "Expending automotive electronic" IEEE Computer, vol. 35, pp. 88-93, 2002. https://doi.org/10.1109/2.976923
  2. J. Ryu, M. Yoon, and M. Sunwoo, "Development of a networkbased traction control system, validation of its traction control algorithm and evaluation of its performance using Net-HILS" Int. J. Automotive Technology, vol. 7, no. 6, pp. 687-695, 2006.
  3. H. Kopetz, "A Comparison of CAN and TTP," Annual Reviews in Control, vol. 24, no. 1, pp. 177-188, 2000. https://doi.org/10.1016/S1367-5788(00)00017-1
  4. 오원현, 권형근, 김정찬, 윤형진, "모델기반 자동코드생성을 이용한 전동기 구동 시뮬레이터 개발," 한국자동차공학회 춘계학술대회 논문집, pp. 1607-1612, 2004.
  5. 김만호, 하경남, 이석, 이경창, "노드 기반 스케줄링 방법을 이용한 FlexRay 네트워크 시스템의 구현," Transactions of KSAE, vol. 18, no. 2, pp. 39-47, 2010
  6. FlexRay Consortium, FlexRay Protocol Specification V2.1, Revision A, 2005.