• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.362-367
• /
• 2005

Control network adopted in the national power-plant or manufactory are mostly vendor-dependent products, which have their own special specification, components and individual communication methods. These systems not only raise installation cost, but also bring many difficulties to maintenance and extension. To overcome these problems, this paper introduces a development and application case of a new "PC/Ethernet-based fieldbus" architecture and protocol to be used in mid-level fieldbus. The designed system has a basic idea of "3 Layers fieldbus over Standard-LAN" and implemented on PCs. PC gives user friendly environment. By using an open standard Ethernet in layer 1,2, the system has low cost, wide communication bandwidth and high compatibility. Layer 3 protocol designed for large realtime data communication makes user bypass TCP/IP layer and gives user direct access to the Ethernet. This new protocol eliminates potential collision of Ethernet, and transmits large periodic/non-periodic control data by using long-frame/wide-bandwidth of Ethernet effectively, and offers simple API-Services to the upper layer. Since the system have installed in H-power plant simulator and U-nuclear power plant simulator in Korea, it have been proved to be efficient and stable without any trouble in realtime communication service for full-scope plant simulator that has a lot of control elements.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2419-2422
• /
• 2000

A distributed real-time system that is being used now is usually divided into three level : higher level, middle level, and lower level. The higher level network is usually called an information network, the middle level is called a control network, and the lower level is called a field network or a divice network. This dissertation suggests and implements a middle level network which is called PICNET-NP (Plant Implementation and Control Network for Nuclear Power Plant). PICNET-NP is based partly on IEEE 802.4 token-passing bus access methed and partly on IEEE 802.3 physical layer. For this purpose a new interface, a physical layer service translater, is introduced. A control network using this method is implemented and applied to a distributed real-time system.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1999.11a
• /
• pp.143-148
• /
• 1999

A distributed real-time system that is being wed now is usually divided into three level : higher level, middle level, and lower level. The higher level network is usually called an information network, the middle level is called a control network, and the lower level is called a field network or a divice network. This dissertation suggests and implements a middle level network which is called PICNET-NP (Plant Implementation and Control Network for Nuclear Power Plant). PICNET-NP is based partly on IEEE 802.4 token-passing bus access method and partly on IEEE 802.3 physical layer. For this purpose a new interface, a physical layer service translator, is introduced. A control network using this method is implemented and applied to a distributed real-time system.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1032-1035
• /
• 1996

While Ethernet and TCP/IP are the most widely used protocol, for Real-time system, it is not applicable because it doesn't guarantee the deterministic transmission time. Furthermore, the TCP acknowledgement scheme and sliding window algorithm enforce to collide packets. Although various Collision-Free CSMA protocol was presented, it is very difficult to implement in well known OS(UNIX, WilidowsNT) because we have to modify network kernel. This paper presents another transmission protocol based on modified UDP. The colliding probability can be minimized by avoiding successive packet transmission and decreasing competition duration. The proposed algorithm can be used for the soft real-time industrial automation network.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 1998.04a
• /
• pp.304-308
• /
• 1998

Technical advances in computer networks and the Internet bring a new communication era and provide effective solutions for cooperative works and research. These technological advances introduced the concept of cyberspace that many people involve reseach and a project at different locations at the same time. In this paper, we present a fast and effective interaction protocol that is aeapted to the COLAB(COIIaborative LABoratory) Systems which use a high-speed ATM Network. The CCOLAB systems is developed for researchers those who are doing a large project on the collaborative research environment. The interaction protocol that we developed supports multi-session and multi-channel on the TCP/IP Network and provides more flexible solution to control multimedia data on the network.

• Journal of the Optical Society of Korea
• /
• v.11 no.2
• /
• pp.59-62
• /
• 2007

In this paper, we introduce a reliable, scalable, and cost-effective switchless wavelength division multiplexing (WDM) network based on a quality-of-service supporting reservation-based medium access control (MAC) protocol. The protocol not only provides both packet and circuit switching but also supports multicasting. The network efficiency is significantly increased by spatially reusing wavelengths and exploiting multiple free spectral ranges (FSRs) of arrayed waveguide grating (AWG) employed in the architecture. We have demonstrated the feasibility of this architecture by simulating in $Optsim^{TM}$.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.5
• /
• pp.467-472
• /
• 2008

In this paper, we design, implement and apply network physical layer to 100 BaseFx optical cable interface module based on industrial ethernet protocol which is physical layer of EtherCAT that has ensure its open standard ethernet compatibility which having been provided with real time of control in network of intelligent service robot, can be process numerous data to sensor and motor control system. Through BLDC motor control performance tests, we try to propose suitability as internal network of intelligent service robot and automation system.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.55 no.7
• /
• pp.303-312
• /
• 2006

This paper proposes the architecture and protocol of a data communication network for the safety system in nuclear power plants. First, we establish four design criteria with respect to determinability, reliability, separation and isolation, and verification/validation. Next we construct the architecture of the safety network for the following systems: PPS (Plant Protection System), ESF-CCS (Engineered Safety Features-Component Control System) and CPCS (Core Protection Calculator System). The safety network consists of 12 sub-networks and takes the form of a hierarchical star. Among 163 communication nodes are about 1600 origin-destination (OD) pairs created on their traffic demands. The OD pairs are allowed to exchange data only during the pre-assigned time slots. Finally, the communication protocol is designed in consideration of design factors for the safety network. The design factors include a network topology of star, fiber-optic transmission media, synchronous data transfer mode, point-to-point link configuration, and a periodic transmission schedule etc. The resulting protocol is the modification of IEEE 802.15.4 (LR-WPAN) MAC combined with IEEE 802.3 (Fast Ethernet) PHY. The MAC layer of IEEE 802.15.4 is simplified by eliminating some unnecessary (unctions. Most importantly, the optional TDMA-like scheme called the guaranteed time slot (GTS) is changed to be mandatory to guarantee the periodic data transfer. The proposed protocol is formally specified using the SDL. By performing simulations and validations using Telelogic Tau SDL Suite, we find that the proposed safety protocol fits well with the characteristics and the requirements of the safety system in nuclear power plants.

• The KIPS Transactions:PartC
• /
• v.15C no.2
• /
• pp.87-92
• /
• 2008

This paper proposes a session control model for the P2P(Peer to Peer) IPTV(Internet Protocol Television) services and presents the IPTV session control procedures based on the proposed model. Since, while public IPTV traffic is usually processed via a separate network, P2P IPTV traffic is processed together with the conventional Internet access traffic, the P2P IPTV control mechanism needs to provide multi-stream processing for the constituent TPS(Triple Play Service) traffic and corresponding QoS(Quality of Service) control functions. Besides, P2P IPTV session control mechanism should provide appropriate multicast control functions in order to support effective transmission of video traffic generated by personal IPTV broadcasters. The P2P IPTV session control model proposed in this paper is designed to be based on the standard SIP(Session Initiation Protocol), IGMP(Internet Group Management Protocol), and COPS(Common Open Policy Service) protocol so that it can contribute to the easy and prompt deployment of inter-operable P2P IPTV platform.

• Journal of Communications and Networks
• /
• v.6 no.4
• /
• pp.362-375
• /
• 2004

An ad hoc network is a multi-hop wireless network. Its limited bandwidth and frequently changing topology require that its protocol should be robust, simple, and energy conserving. We have proposed PoolODMRP to reduce its control overhead greatly by its one-hop local route maintenance. However, PoolODMRP still has some shortcomings. In this paper, we propose PDAODMRP (passive data acknowledgement ODMRP) to extend PoolODMRP. Compared with PoolODMRP, PDAODMRP has the following contributions: (1) It knows the status of its downstream forwarding nodes by route information collected from data packets instead of BEACON signal of MAC layer; (2) it max simplifies the route information collected from data packets by pool nodes; (3) it adopts a dynamic local route maintenance to enforce its local route maintenance; (4) it adopts the route evaluation policy of NSMP (neighbor supporting multicast protocol). Compared with PoolODMRP, PDAODMRP has lower control overhead, lower data delivery delay, and lower data overhead.