• Journal of the Institute of Convergence Signal Processing
• /
• v.11 no.1
• /
• pp.53-62
• /
• 2010

Recently, various industrial embedded systems including vehicles controlled electronically are evolving to distributed multi-micro controller system. Accordingly, there is a need for standard CAN(Controller Area Network) protocol that ensures high stability and reliability of communication and is simple to construct object-oriented system with high control efficiency. CAN communication interface used general-purpose processor doesn't have many limitations in various application development because of fixed hardware architecture. This paper design and implement a CAN communication interface system based on FPGA. It is verified function and performance of system through monitoring communication with existing AT90CAN128 controller. Implemented CAN communication interface can be reused in development of application systems based on FPGA. And it provides low-cost, small-size and low-power design advantages.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.11B
• /
• pp.1607-1617
• /
• 2010

In this paper we propose MA-CBRP, mesh adaptive algorithm for wireless mesh networks. MA-CBRP is a hybrid algorithm based on ad-hoc CBRP protocol. In MA-CBRP, the mesh router periodically sends the ANN message as like Hello-message in CBRP. ANN message allows to all clients periodically store a route towards the mesh-router and renewal information in their routing cache. While CBRP periodically reply Hello-message, MA-CBRP does not reply to achieve less overhead. After receiving ANN message, mesh client send JOIN message to mesh router when the route towards mesh router changed. at the same time Register the entry to mesh router, it can achieve to reduce overhead of control the route and shorten the time to find route. consequently, MA-CBRP shows 7% reduced overhead and shortened time to find route than CBRP with regardless of clients number.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.3
• /
• pp.91-99
• /
• 2009

Development of high-speed Internet services and the increased supply of mobile devices have become the key factor for the acceleration of ubiquitous technology. WiBro system, formed with lP backbone network, is a MBWA technology which provides high-speed multimedia service in a possibly broader coverage than Wireless LAN can offer. Wireless telecommunication environment needs not only mobility support in Layer 2 but also mobility management protocol in Layer 3 and has to minimize handover latency to provide seamless mobile services. In this paper, we propose a fast cross-layer handover scheme based on signal strength prediction in WiBro environment. The signal strength is measured at regular intervals and future value of the strength is predicted by Exponential Smoothing Method. With the help of the prediction, layer-3 handover activities are able to occur prior to layer-2 handover, and therefore, total handover latency is reduced. Simulation results demonstrate that the proposed scheme predicts that future signal level accurately and reduces the total handover latency.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.9
• /
• pp.1655-1665
• /
• 2017

Recently data centers are being constructed actively by many cloud service providers, enterprises, research institutes, etc. Generally, they are built on tree topology using ECMP data forwarding scheme for load balancing. In this paper, we examine data center network topologies like tree topology and fat-tree topology, and load balancing technologies like MLAG and ECMP. Then, we propose a scheduling algorithm to efficiently transmit particular files stored on the hosts in the data center to the destination node outside the data center, where fat-tree topology and OpenFlow protocol between infrastructure layer and control layer are used. We run performance analysis by numerical method, and compare the analysis results with those of ECMP. Through the performance comparison, we show the outperformance of the proposed algorithm in terms of throughput and file transfer completion time.

• The KIPS Transactions:PartA
• /
• v.14A no.4
• /
• pp.215-226
• /
• 2007

For past years, many distributed virtual shared-memory(DVSM) systems have been studied in order to develop a low-cost shared memory system with a fast interconnection network. But the DVSM needs a lot of data and control communication between distributed processing nodes in order to provide memory consistency in software, and this communication overhead significantly dominates the overall performance. In general, the communication overhead also increases as the number of processing nodes increase, so communication overhead is a very important performance factor for developing a large-scale DVSM system. In this paper, we study the performance scalability quantitatively and qualitatively for developing a large-scale DVSM system based on the next generation interconnection network, called the InfiniBand. Based on the study, we analyze a performance requirement of the next-coming interconnection network to be used for developing a performance-scalable DVSM system in the future.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.712-715
• /
• 2010

In recent years, the driver needs the convenience of their vehicles and that there is an increasing requirement. Many researches have been mainly focused on MOST Networks to provide quality of multimedia service. The MOST network to support different bandwidth(MOST 25, MOST 50, MOST 150) should consist of a heterogeneous network. So the networks to used different protocols required gateway for receive and transmit information. The method to used gateway has problems occured loss of a packet by a lot of delay. In our previous research, we proposed a MOST GATEWAY system for organically connected to the network MOST150 and MOST 25. Therefore in this paper, we propose a simulation design Method of dynamic gateway system for MOST GATEWAY Performance Analysis in MOST25 and MOST150 Networks.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.11
• /
• pp.2187-2192
• /
• 2016

A data-centric routing protocol considering a data aggregation technique at relay nodes is required to increase the lifetime of wireless sensor networks. An energy-efficient data-centric routing algorithm is proposed by considering a tradeoff between acquisition time and energy consumption in the wireless sensor network. First, the proposed routing scheme decides the sink node among all sensor nodes in order to minimize the maximum distance between them. Then, the proposed routing extends its tree structure in a way to minimize the link cost between the connected nodes for reducing energy consumption while minimizing the maximum distance between sensor nodes and a sink node for rapid information gathering. Simulation results show that the proposed data-centric routing algorithm has short information acquisition time and low energy consumption; thus, it achieves high energy efficiency in the wireless sensor network compared to conventional routing algorithms.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.277.2-277.2
• /
• 2013

Petri dishes and glass slides have been widely used as general substrates for in vitro mammalian cell cultures due to their culture viability, optical transparency, experimental convenience, and relatively low cost. Despite the aforementioned benefit, however, the flat two-dimensional substrates exhibit limited capability in terms of realistically mimicking cellular polarization, intercellular interaction, and differentiation in the non-physiological culture environment. Here, we report a protocol of culturing embryonic rat hippocampal neurons on the electro-spun polymeric network and the results from examination of neuronal cell behavior and network formation on this culture platform. A combinatorial method of laser-scanning confocal fluorescence microscopy and live-cell imaging technique was employed to track axonal outgrowth and synaptic connectivity of the neuronal cells deposited on this model culture environment. The present microfiber-based scaffold supports the prolonged viability of three-dimensionally-formed neuronal networks and their microscopic geometric parameters (i.e., microfiber diameter) strongly influence the axonal outgrowth and synaptic connection pattern. These results implies that electro-spun fiber scaffolds with fine control over surface chemistry and nano/microscopic geometry may be used as an economic and general platform for three-dimensional mammalian culture systems, particularly, neuronal lineage and other network forming cell lines.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.31 no.3
• /
• pp.373-385
• /
• 2021

To provide convenience and safety of drivers, the recent vehicles are being equipped with a number of electronic control units (ECUs). Multiple ECUs construct a network inside a vehicle to share information related to the vehicle's status; in addition, the CAN protocol is normally applied. As the modern vehicles provide highly convenient and safe services, it provides many types of attack surfaces; as a result, it makes them vulnerable to cyber attacks. The automotive IDS (Intrusion Detection System) is one of the promising techniques for securing vehicles. However, the existing methods for automotive IDS are able to analyze only periodic messages. If someone attacks on non-periodic messages, the existing methods are not able to properly detect the intrusion. In this paper, we present a method to detect intrusions including an attack using non-periodic messages. Moreover, we evaluate our method on the real vehicles, where we show that our method has 0% of FPR and 0% of FNR under our attack model.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.10B
• /
• pp.1050-1061
• /
• 2009

The Tactical Internet(TI) managed by Infantry Brigades is used for the purpose of sharing information of Command Control and Situation Awareness. When there are more than two destinations to transmit data in the TI system, a multicasting is utilized based on pre-defined multicast groups. However even in the case when a source node needs to send some messages like weathercast and attack alarm etc to only a part of Battalion or Brigades in a specific geographical region (destination region), the current TI multicasting protocol is designed to transmit the messages to the pre-defined group or all of the Battalion/Brigade nodes, resulting in inefficiency in terms of end-to-end delay and overhead. In this paper, we propose more efficient protocol for such cases, named as "Tactical Internet Geocasting (TIG)". The proposed scheme firstly checks whether the destination region belongs to one Battalion region or more than two Battalion regions using location information, and then performs a greedy forwarding from the source node to the destination region, followed by a local flooding inside of the destination region. With performance analysis and simulations using NS-2, TIG is compared to the current TI multicasting protocol (i.e., Simplified MDP) and the LBM (Location-based Multicast). The simulation results show that the proposed TIG is more efficient than both in terms of delay and network overhead.