• Journal of Information Processing Systems
• /
• v.17 no.1
• /
• pp.63-74
• /
• 2021

According to the double-phase cluster-head election method (DCE), the final cluster heads (CHs) sometimes are located at the edge of cluster. They have a long distance from the base station (BS). Sensor data is directly transmitted to BS by CHs. This makes some nodes consume much energy for transmitting data and die earlier. To address this problem, energy efficient multi-hop cluster-head election strategy (EEMCE) is proposed in this paper. To avoid taking these nodes far from BS as CH, this strategy first introduces the distance from the sensor nodes to the BS into the tentative CH election. Subsequently, in the same cluster, the energy of tentative CH is compared with those of other nodes, and then the node that has more energy than the tentative CH and being nearest the tentative CH are taken as the final CH. Lastly, if the CH is located at the periphery of the network, the multi-hop method will be employed to reduce the energy that is consumed by CHs. The simulation results suggest that the proposed method exhibits higher energy efficiency, longer stability period and better scalability than other protocols.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.12
• /
• pp.4617-4632
• /
• 2021

IEEE 802.11ax is a protocol being developed for high-density Wireless Local Area Networks (WLAN). Several algorithms have been proposed to improve the level of spatial reuse applied in IEEE 802.11ax. However, these algorithms are tentative and do not specify how to select the transmit power and carrier sense threshold in practice; It is unclear when and why the tuned parameters lead to better network performance. In this paper, we restricted the scale of transmit power tuning to prevent the case of backfire in which spatial reuse will result in transmission failure. If the restrictions cannot be satisfied, spatial reuse will be abandoned. This is why we named the proposed scheme as Arbitration based Spatial Reuse (ASR). We quantified the network performance after spatial reuse, and formulate a corresponding maximum problem whose solution is the optimal carrier sense threshold and transmit power. We verified our theoretical analysis by simulation and compared it with previous studies, and the results show that ASR improves the throughput up to 8.6% compared with 802.11ax. ASR can avoid failure of spatial reuse, while the spatial reuse failure rate of existing schemes can up to 36%. To use the ASR scheme in practice, we investigate the relation between the optimal carrier sense threshold and transmit power. Based on the relations got from ASR, the proposed Relation based Spatial Reuse (RSR) scheme can get a satisfactory performance by using only the interference perceived and the previously found relations.

• Convergence Security Journal
• /
• v.23 no.1
• /
• pp.63-68
• /
• 2023

In this study, in relation to blockchain protocol and network security, we study the configuration of blockchain and encryption key management methods on smart contracts so that we can have a strong level of response to MITM attacks and DoS/DDoS attacks. It is expected that the use of blockchain technology with enhanced security can be activated through respond to data security threats such as MITM through encryption communication protocols and enhanced authentication, node load balancing and distributed DDoS attack response, secure coding and vulnerability scanning, strengthen smart contract security with secure consensus algorithms, access control and authentication through enhanced user authentication and authorization, strengthen the security of cores and nodes, and monitoring system to update other blockchain protocols and enhance security.

• Annual Conference of KIPS
• /
• 2008.11a
• /
• pp.1232-1235
• /
• 2008

TTCN-3(Testing & Test Control Notation Version 3)은 국제 표준 테스팅 언어이다. TTCN-3는 다양한 통신 프로토콜이나 장치간의 연동성을 검증하기 위한 적합성 시험을 할 수 있고, 프로토콜이나 통신 장치가 표준에 적합하게 구현되었는지를 검증할 수 있다. 본 논문에서는 TTCN-3을 사용하여 종단과 종단간의 연결설정의 확립의 인증성 시험에 대한 프로토콜 장치간의 상호 여동성을 보장하기 위한 적합성 시험을 제안하고, 산호 연동성 시험과 장치에 구현된 프로토콜이 표준 구격에 적합한지를 시험하는 예를 시험한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.772-776
• /
• 2004

This paper proposes an interference avoidance approach for Constraint-Based Routing (CBR) algorithm in the Multi-Protocol Label Switching (MPLS) network. The MPLS network itself has a capability of integrating among any layer-3 protocols and any layer-2 protocols of the OSI model. It is based on the label switching technology, which is fast and flexible switching technique using pre-defined Label Switching Paths (LSPs). The MPLS network is a solution for the Traffic Engineering(TE), Quality of Service (QoS), Virtual Private Network (VPN), and Constraint-Based Routing (CBR) issues. According to the MPLS CBR, routing performance requirements are capability for on-line routing, high network throughput, high network utilization, high network scalability, fast rerouting performance, low percentage of call-setup request blocking, and low calculation complexity. There are many previously proposed algorithms such as minimum hop (MH) algorithm, widest shortest path (WSP) algorithm, and minimum interference routing algorithm (MIRA). The MIRA algorithm is currently seemed to be the best solution for the MPLS routing problem in case of selecting a path with minimum interference level. It achieves lower call-setup request blocking, lower interference level, higher network utilization and higher network throughput. However, it suffers from routing calculation complexity which makes it difficult to real task implementation. In this paper, there are three objectives for routing algorithm design, which are minimizing interference levels with other source-destination node pairs, minimizing resource usage by selecting a minimum hop path first, and reducing calculation complexity. The proposed CBR algorithm is based on power factor calculation of total amount of possible path per link and the residual bandwidth in the network. A path with high power factor should be considered as minimum interference path and should be selected for path setup. With the proposed algorithm, all of the three objectives are attained and the approach of selection of a high power factor path could minimize interference level among all source-destination node pairs. The approach of selection of a shortest path from many equal power factor paths approach could minimize the usage of network resource. Then the network has higher resource reservation for future call-setup request. Moreover, the calculation of possible path per link (or interference level indicator) is run only whenever the network topology has been changed. Hence, this approach could reduce routing calculation complexity. The simulation results show that the proposed algorithm has good performance over high network utilization, low call-setup blocking percentage and low routing computation complexity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.8
• /
• pp.1631-1636
• /
• 2015

With the advance of wireless communication technology in terrestrial area, underwater communication is also evolving very fast from a simple point-to-point transmission to an elaborate networked communications. Underwater acoustic channel has quite different features comparing with the terrestrial radio channel in terms of propagation delay, Doppler shift, multipath, and path loss. Thus, existing technologies developed for terrestrial communication might not work properly in underwater channel. Especially medium access control (MAC) protocols which highly depend on propagation phenomenon should be newly designed for underwater network. CSMA/CA has drawn lots of attention as a candidate of underwater MAC protocol, since it is able to resolve a packet collision and the hidden node problem. However, a received signal could be degraded by the interferences from the nodes locating outside the receiver's propagation radius. In this paper, we study the effects of interference on the CSMA/CA based underwater network. We derived the SNR with the interference using the sonar equation and analyzed the degradation of the RTS/CTS effects. These results are compared with the terrestrial results to understand the differences. Finally we summarized the design considerations in CSMA/CA based underwater network.

• Smart Media Journal
• /
• v.8 no.2
• /
• pp.29-38
• /
• 2019

With the advancement of information and communication technology, tactical networks are continuously being converted to All-IP future tactical networks that integrate all application services based on Internet protocol. Futuristic tactical mesh network is built with tactical WAN (wide area network) nodes that are inter-connected by a mesh structure. In order to guarantee QoS (quality of service) of application services, tactical service mesh (TSM) is suggested as an intermediate layer between infrastructure and application layers for futuristic tactical mesh network. The tactical service mesh requires dynamic QoS monitoring and control for intelligent QoS coordination. However, legacy networking nodes used for existing tactical networks are difficult to support these functionality due to inflexible monitoring support. In order to resolve such matter, we propose a tactical mesh WAN node as a hardware/software co-designed networking node in this paper. The tactical mesh WAN node is conceptually designed to have multi-access networking interfaces and virtualized networking switches by leveraging the DANOS whitebox server/switch. In addition, we explain how to apply eBPF-based traffic monitoring to the tactical mesh WAN node and verify the traffic monitoring feasibility for supporting QoS coordination of tactical-mesh traffic.

• Journal of Power Electronics
• /
• v.13 no.2
• /
• pp.313-321
• /
• 2013

This paper describes the operation analysis results of a communication-based DC micro-grid using a hardware simulator developed in the lab. The developed hardware simulator is composed of distributed generation devices such as wind power, photovoltaic power and fuel cells, and energy storage devices such as super-capacitors and batteries. Whole system monitoring and control was implemented using a personal computer. The power management scheme was implemented in a main controller based on a TMS320F28335 chip. The main controller is connected with the local controller in each of the distributed generator and energy storage devices through the communication link based on a CAN or an IEC61850. The operation analysis results using the developed hardware simulator confirm the ability of the DC micro-grid to supply the electric power to end users.

• IEIE Transactions on Smart Processing and Computing
• /
• v.5 no.1
• /
• pp.29-34
• /
• 2016

A controller area network (CAN) controller is an integral part of an electronic control unit, particularly in an advanced driver assistance system application, and its characteristics should always be advantageous in all aspects of functionality especially in real time application. The cost should be low, while maintaining the functionality and reliability of the technology. However, a CAN protocol implementing serial operation results in slow throughput, especially in a cyclical redundancy checking (CRC) unit. In this paper, digital signal processing (DSP) algorithms are implemented, namely pipelining, unfolding, and retiming the CAN controller in the CRC unit, particularly for the encoder and decoder sections. It must attain a feasible iteration bound, a critical path that is appropriate for a CAN system, and must obtain a superior design of a high-speed parallel circuit for the CRC unit in order to have a faster transmission rate. The source code for the encoder and decoder was formulated in the Verilog hardware description language.

• Journal of Korea Multimedia Society
• /
• v.19 no.5
• /
• pp.910-917
• /
• 2016

Sensors have limited resources in sensor networks, so efficient use of energy is important. Representative clustering methods, LEACH, LEACHC, TEEN generally use direct transmission methods from cluster headers to the sink node to pass collected data. However, the communication distance of the sensor nodes at low cost and at low power is not long, it requires a data transfer through the multi-hop to transmit data to the sink node. In the existing cluster-based sensor network studies, cluster process and route selection process are performed separately in order to configure the routing path to the sink node. In this paper, in order to use the energy of the sensor nodes that have limited resources efficiently, a cluster-based multi-hop routing protocol which merges the clustering process and routing process is proposed. And the proposed method complements the problem of uneven cluster creation that may occur in probabilistic cluster methods and increases the energy efficiency of whole sensor nodes.