• Journal of Digital Convergence
• /
• v.12 no.2
• /
• pp.335-341
• /
• 2014

To play the networked video contents in a client's mobile device in real time, the contents should be delivered to it by the contents server with streaming technology. Generally, in a server-client based commerce model, the server is in charge of both the authentication of the paid customer and distribution of the contents. The drawback of it is that if the customers' requests go on growing rapidly, the service quality would be degraded results from the problems of overloaded server or restricted network bandwidth. On the contrary, in P2P based networks, more and more the demand for service increasing, the service quality is upgraded since a customer can act as a server. But, in the P2P based network, there are too many servers to manage, it's possible to distribute illegal contents because the P2P protocol cannot control distributed servers. Thus, it's not suitable for commercial purposes. In this paper, the dymanic group authentication scheme is proposed which is suited to P2P based applications. The proposed scheme consists of group based key generation, key update, signature generation and verification protocols. It can control the seeder's state whether the seeder is joining or leaving the network, and it can be applied to hybrid P2P based commerce model where sales transactions are covered by the index server and the contents are distributed by the P2P protocol.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.1 s.343
• /
• pp.111-120
• /
• 2006

In this paper, a node architecture of WDM metro network for connecting broadband access networks to converge wire/wireless networks. In consideration of the proposed node architecture and network requirements we proposed and evaluated medium access control protocols. We review WDM related technologies of sub-carrier multiplexing and optical components in order to resolve the bottleneck between optical backbone networks md access networks, and a access node architecture sharing common wavelength is introduced. Source-stripping (SS) MAC protocol Is evaluated under the proposed functional node architecture. DS+IS (Destination-Stripping and Source-Stripping) and DS+IS (Destination-Stripping and Intermediate-Stripping) MAC protocols are described to increase the slot-reuse factor which is low on SS MAC protocol. The key function of new MAC protocols regards the optical switch module of proposed node architecture and helps intermediate or source access nodes for dropping slots to destinations of different wavelength group. Thus, slot-reuse factor increases as the MAC protocols reduce the unnecessary ring-rotation of transferred slots. We use a numerical analysis to expect bandwidth efficiency and maximum throughput by slot-reuse factor Throughput network simulation, the verification of throughput, queuing delay, and transmission fairness are compared among MAC protocols.

• Journal of KIISE:Information Networking
• /
• v.32 no.4
• /
• pp.483-494
• /
• 2005

The standard streaming delivery Is mostly based on UDP with no end-to-end congestion control. For this reason, wide usage of multimedia applications in Internet might lead to congested networks. To avoid such a situation, studies on the congestion controlled streaming delivery has been increasingly done after the 1990s. However, by considering only the stability aspect of network, these works ignore the characteristics of multimedia streaming applications. Moreover, most of previous works have no consideration on the network delay which produces an effect on streaming service. In this thesis, in order to overcome limitations of the previous transmission schemes for streaming, we propose a new transmission scheme called 'BEST(Buffer-driven Efficient STreaming)'. The BEST takes a hybrid approach that considers both user-level requirements and network-level requriements. Therefore, the BEST improves the stability of networks by adjusting the sending rate suitable for network status and it also provides the smoothed playback by preventing buffer underflow or overflow. The BEST is designed to consider high-delay networks. Through the simulation, we prove that the BEST satisfies both user-level and network-level requirements in a high-delay network environments.

• Journal of Satellite, Information and Communications
• /
• v.9 no.1
• /
• pp.51-56
• /
• 2014

High-availability seamless redundancy (HSR) is a protocol for fault-tolerant Ethernet (FTE) networks. It provides two frame copies and each copy is forwarded on a separate physical path, which provides zero fail-over time. Therefore, the HSR is becoming a potential candidate for various real-time FTE applications. However, the generation and circulation of unnecessary frames due to the duplication of every sending frame is inherent drawback of HSR. Such drawback degrades the performance of the network and may deplete its resources. In this paper, we present a new algorithm called port locking (PL) based on the media access control (MAC) address to solve the abovementioned problem in popular connected-rings network. Our approach makes the network gradually learn the locations of the source and the destination nodes without relying on network control frames. It then prunes all the rings that do not contain the destination node by locking corresponding rings' entrance ports. With the PL algorithm, the traffic can be significantly reduced and therefore the network performance will be greatly enhanced specially in a large scale connected-rings network. Analytical results are provided to validate the PL algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.8A
• /
• pp.618-624
• /
• 2009

In the evolution from wireless sensor networks(WSNs) to ubiquitous sensor networks(USNs), technologies that can support intensive data-traffic loads, large number of users, improved interoperability, and extreme longevity are required. Therefore, efficient communication time coordination control and low power consumption becomes one of the most important design goals for USN MAC protocols. So far several time division multiplexed (TDM) MAC protocols have been proposed. However, since the pros and cons of existing protocols are not easy to analyze, it becomes a challenging task to design improved TOM MAC protocols. Based on this objective, this paper provides a novel protocol analysis along with a message complexity derivation and comparison of the existing TDM MAC protocols.

• Journal of Digital Contents Society
• /
• v.15 no.3
• /
• pp.319-326
• /
• 2014

IEEE 802.11 WLAN uses CSMA/CA(Carrier Sense Multiple Access/Collision Avoidance) method in MAC(Media Access Control) protocol, and through the carrier sense checks whether other users use the channel during the data transmission to avoid the data collision. Currently, IEEE 802.11 standard recommends the use of a fixed threshold which gives an impact on carrier sensing range. However, the existing scheme using the fixed threshold causes the operation of network to be inefficiency owing to the mobility in MANET(Mobile Ad hoc NETwork). In this paper, we found the better network throughput to be obtained by applying the proposed scheme, which chooses properly the carrier sensing threshold and transmission rate considering SINR(Signal to Interference-plus-Noise Ratio), to the MANET.

• International Journal of Computer Science & Network Security
• /
• v.24 no.8
• /
• pp.32-42
• /
• 2024

The Internet of Things (IoT) is set to transform patient care by enhancing data collection, analysis, and management through medical sensors and wearable devices. However, the convergence of IoT device vulnerabilities and the sensitivity of healthcare data raises significant data integrity and privacy concerns. In response, this research introduces the Smart-Coord system, a practical and affordable solution for securing healthcare IoT. Smart-Coord leverages blockchain technology and coordinate-based access management to fortify healthcare IoT. It employs IPFS for immutable data storage and intelligent Solidity Ethereum contracts for data integrity and confidentiality, creating a hierarchical, AES-CBC-secured data transmission protocol from IoT devices to blockchain repositories. Our technique uses a unique coordinate system to embed confidentiality and integrity regulations into a single access control model, dictating data access and transfer based on subject-object pairings in a coordinate plane. This dual enforcement technique governs and secures the flow of healthcare IoT information. With its implementation on the Matic network, the Smart-Coord system's computational efficiency and cost-effectiveness are unparalleled. Smart-Coord boasts significantly lower transaction costs and data operation processing times than other blockchain networks, making it a practical and affordable solution. Smart-Coord holds the promise of enhancing IoT-based healthcare system security by managing sensitive health data in a scalable, efficient, and secure manner. The Smart-Coord framework heralds a new era in healthcare IoT adoption, expertly managing data integrity, confidentiality, and accessibility to ensure a secure, reliable digital environment for patient data management.

• KIPS Transactions on Computer and Communication Systems
• /
• v.3 no.10
• /
• pp.357-364
• /
• 2014

The first mission for the IoT based hyper-connectivity communication is developing a device-to-device communication technique in infra-less low-power and lossy networks. In a low-power and lossy wireless network, IoT devices and routers cannot keep the original path toward the destination since they have the limited memory. Different from the previous light-weight routing protocols focusing on the reduction of the control messages, the proposed scheme provides the light-weight IPv6 address auto-configuration, IPv6 neighbor discovery and routing protocol in a IoT capable infra-less wireless networks with the bloom filer and enhanced rank concepts. And for the first time we evaluate our proposed scheme based on the modeling of various probability distributions in the IoT environments with the lossy wireless link. Specifically, the proposed enhanced RPL based light-weight routing protocol improves the robustness with the multi-paths locally established based on the enhanced rank concepts even though lossy wireless links are existed. We showed the improvements of the proposed scheme up to 40% than the RPL based protocol.

• Journal of Biomedical Engineering Research
• /
• v.19 no.1
• /
• pp.19-24
• /
• 1998

The main goal of this paper is to propose and to test a radio protocol based CSMA/CA (Carrier Sense Multiple Access with Collision Avoidance) for the purpose of enhancing the existing medical information system. The feature of the new medical information system, Medical Application Radio System(MARS), which operating in real time is the transmission of medical information in bi-direction between the hospital control office and patients mobile stations. MARS monitors patients linked to the network by radio and provides quick alarm, flexible documentation capabilities, asnd fast treatment for the analysis of collected medical data. The existing medical information system, radio telemetry system which transfers the message of patients to the CAP(Central Access Point) unit in one way at the speed of 9.6Kbps and operates a channel frequency bandwidth. To verify the Performance of the proposed system, we have performed the numerical analysis and have implemented a test system which consists of the 2.4Ghz radio transceiver and personal computer.

• Journal of Advanced Navigation Technology
• /
• v.6 no.2
• /
• pp.158-167
• /
• 2002

In this paper, it is analyzed that WAP packet transmission time to improve performance of WAP using SAR-QT algorithm in Bluetooth channel. The order for SAR-QT algorithm to improve the transfer capability, it is fragmented in WTP total messages that are coming down from upper layer and then the packets are sent one at time in baseband. And it is studied that transmission time for WAP over Bluetooth according to DMI, DM3 or DM5 packet type using SAR-QT algorithm in Bluetooth piconet environment. This SAR-QT algorithm decreases WAP packet transmission time of L2CAP baseband packets by sending packet that are spanning multiple slots. From the results, in WAP over Bluetooth channels, it is found out that WTP packet size ought to be increased to decrease transmission time of WAP packet. In addition, considering BER in wireless channel, optimal WTP packet size is achieved for WAP over Bluetooth in a Rician fading environment.