• Journal of Power Electronics
• /
• v.12 no.1
• /
• pp.164-171
• /
• 2012

Variable step size maximum power point trackers (MPPTs) are widely used in photovoltaic (PV) systems to extract the peak array power which depends on solar irradiation and array temperature. One essential factor which judges system dynamics and steady state performances is the scaling factor (N), which is used to update the controlling equation in the tracking algorithm to determine a new duty cycle. This paper proposes a novel stability study of variable step size incremental resistance maximum power point tracking (INR MPPT). The main contribution of this analysis appears when developing the overall small signal model of the PV system. Therefore, by using linear control theory, the boundary value of the scaling factor can be determined. The theoretical analysis and the design principle of the proposed stability analysis have been validated using MATLAB simulations, and experimentally using a fixed point digital signal processor (TMS320F2808).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.629-634
• /
• 2016

In this study, we investigated the effect of factors that influence the measurement of smoke density using synthetic rubber flooring. The characteristics of rolling stock in an enclosed environment can cause enormous loss of life by smoke inhalation during fires inside passenger cars. The amount of smoke generation from interior materials for rolling stock is strictly restricted domestically and in other countries. Precise measurement of smoke density is therefore required to assess the fire performance of interior materials. Major factors that influence the measurement of smoke density include the uniformity of the specimen, the variations in conditions and instruments, and the operational and maintenance environment of the instruments. The contribution of factors was analyzed by estimating the uncertainty to investigate the contribution ratios of the major factors. The results show a contribution ratio of about 86% for the variation from the measurement of light transmission using a photomultiplier tube. Thus, this factor was the most representative for the measurement of smoke density. The contribution ratio of the other factors was low at about 11%, including irradiant flux conditions (${\pm}0.5 kW/m^2$) and the influence of the operational and maintenance environment of the instrument. These results were obtained using specimens with high uniformity.

• Tunnel and Underground Space
• /
• v.32 no.2
• /
• pp.160-172
• /
• 2022

The design regulations for simple explosive storage in Korea only stipulate standards for the materials and thickness of the wall of the structure because the amount of explosives that can be stored is small. There is concern about secondary damage during an internal explosion in a simple storage facility, and it is necessary to reexamine the current standards. The numerical analysis for the TNT 15 kg explosion inside the simple storage was carried out by setting the factors using the robust experimental design method. The displacement of the structure generated under the same time condition was analyzed, and the contribution was evaluated. The contribution of concrete thickness was the highest, and the contribution of concrete strength and rebar arrangement was lower than that of concrete thickness. The reinforcement diameter contributed extremely little to the displacement. The structural standards of the simple storage that are currently applied are insufficient on blast resistance, and it is necessary to present new design standards. Therefore, the design factor to be applied later analysis and actual experiments were taken into consideration. For the design variables, the thickness of the concrete was 15 cm considering the displacement, the concrete strength was selected as general concrete considering the inlet discharge pressure, the factor with the lowest average displacement was selected for the reinforcement arrangement and the diameter of the reinforcement, the factor with the smallest level was selected in consideration of economic feasibility because the difference in displacement was low.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2010.04a
• /
• pp.553-554
• /
• 2010

• The Journal of the Korea Contents Association
• /
• v.10 no.8
• /
• pp.398-406
• /
• 2010

The purpose of this study is to see how much the event attitude of football contest sponsoring company has effects on both the company image for best enterprise and the company image for social contribution and to establish the correlation of these both images with the intent of purchase. For this study, we finally selected 319 persons who participated in Budweiser 6v6 Cup Soccer Contest in 2008 as subject of study. Confirmatory factor analysis, correlation analysis, structural equation model using SPSS 12.0 and AMOS 5.0. The main result of study is as follows : First, the event attitude has a positive effect on the company image for best enterprise. Second, the event attitude has a positive effect on the company image for social contribution. Third, the company image for best enterprise has a positive effect on the intent of purchase. Fourth, the company image for social contribution does not have any effect on the intent of purchase.

• Korean Journal of Agricultural Science
• /
• v.46 no.3
• /
• pp.461-469
• /
• 2019

The aim of this study was to analyze the contribution of carcass traits (backfat thickness, eye muscle area, carcass weight and marbling score) and the season at slaughter to the price (auction and market) using squared semi-partial correlation. The season at slaughter (summer expressed as season_2, autumn as season_3, and winter as season_4) were added into the estimation as dummy variables, and spring was set as a default variable. In this study, the carcass grades of 22,298 Hanwoo steers slaughtered from 2012 to 2017 were used to performmultiple regression analysis. The rankings of the contribution of the carcass traits and the seasons at slaughter to the auction prices were in the order of marbling score (68.63%), season_4 (11.88%), backfat thickness (10.45%), eye muscle area (6.11%), season_3 (2.19%), season_2 (0.45%) and carcass weight (0.28%). (R-square of the regression = 0.4101). The rankings of the contribution to the total prices were in the order of carcass weight (51.74%), marbling score (32.12%), season_4 (6.04%), backfat thickness (5.54%), eye muscle area (3.22%), season_3 (1.14%), and season_2 (0.19%). (R-Square of the regression = 0.6486). As a result, season_3 and season_4 had a negative effect on the auction price and total price. Because of seasonal event such as Korean Thanksgiving Day and Korean New Year's Day on season_3 and season_4, much supply was needed to meet the high demand. Thus, the seasonal effect at slaughter could be another factor to be cosideredin when considering of slaughter or breeding.

• Analytical Science and Technology
• /
• v.27 no.6
• /
• pp.269-276
• /
• 2014

A short study for the uncertainty of post column isotope dilution method has been performed for the analysis of Selenomethionine in HPLC-ICP/MS. Major error sources studied were concentration and the flow rate of Se isotope solution, atomic weights of Se in spike and sample, and isotope ratio measured for the spiked sample. Uncertainties were obtained for each factor and the contribution for the total concentration uncertainty was 54.4% and 0.61%, 0.0072% and 0.018%, and 45.0%, respectively. The biggest contribution factor was concentration of the spike solution and the second was the isotopic ratio measured for the spiked sample solution. The mass flow rate of spike and atomic weights did not show much contribution. The calculated total uncertainty was $1.46ng{\cdot}g^{-1}$ for the standard SeMet ($126.30ng{\cdot}g^{-1}$). The experimental result was $127.09{\pm}1.46ng{\cdot}g^{-1}$ and the relative uncertainty was 1.20%.

• Journal of radiological science and technology
• /
• v.30 no.3
• /
• pp.271-280
• /
• 2007

The objectives of this study were to identify the types of work values of radiological technology students and to verify the characteristics of them. The population of this study was the radiological technology students from 7 colleges randomly chosen in the whole country. data collected from 791 subjects were used. Types of work values were identified through the factor analysis and t-test between variables was used to determine the characteristics of the students. The research instrument used in this study was the Maryland Work Value Inventory(MWVI) designed by Meitus, R. The findings of this study were as follows ; 1. The types of work values of radiological technology students can be classified into 6 categories ; social contribution, achievement, capability, work interest, social status, economic reward. 2. Social contribution, achievement, capablity and work interest were classified as 'internal work values', while social status and economic reward as 'external work values'. 3. Work values of the radiological technology students were economic reward, social status, achievement, capablity, work interest, social contribution in order. 4. External work values of the radiological technology students got higher grade than internal work values.

• Korean Chemical Engineering Research
• /
• v.54 no.1
• /
• pp.22-35
• /
• 2016

In this study CALPUFF modeling was performed to establish a correlation between regions of frequent civil odor complaints near Gumi national industrial complex and odor-emission facilities of synthetic fiber manufacturers in the same area as main acetaldehyde-emission point sources. As a result of the CALPUFF modeling, the maximum concentration of acetaldehyde in Gumi national industrial complex was reduced from O ($10^{-5}g/m^3$) to O ($10^{-6}g/m^3$) upon improving emission facilities of T company so that the maximum concentrations of acetaldehyde frequently appeared in complex 3. In addition, the predicted range of the maximum acetaldehyde concentration in Gumi national industrial complex was also improved in comparison with that prior to improving emission facilities of T company. These maximum concentrations of acetaldehyde obtained to estimate the expected contribution of total acetaldehyde point source by CALPUFF modeling showed the similar values to those measured in 'HAPs investigation in the region of Gumi-Daegu' and were consistent to the trend of civil odor complaints. Therefore, the expected contribution of total acetaldehyde point source was validated. The relative contribution of T company upon improving its emission facilities was predicted to be lowered by more than factor of two, compared to that prior to improving its emission facilities. To the contrary, the relative contribution of W company upon improving emission facilities of T company was predicted to be increased by more than factor of two, compared to that prior to improving emission facilities of T company. This indicates that the contribution of aldehyde point sources of W company was relatively increased upon improving emission facilities of T company.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.6
• /
• pp.592-602
• /
• 2020

This study examined the contribution of the risk factors that cause cardiovascular disease in Koreans. The subjects were 20,012 adults aged 30~74 years who were enrolled from the 2005~2013 Korean National Health and Nutrition Examination Survey, had filled the risk factors data, and had no cardiovascular disease history. Data analysis was conducted using SAS 9.3, and a weighted composite sample design analysis was performed. The contribution was obtained by applying a squared semi-partial correlation. As a result, they were higher in the order of age (63.9%), smoking (17.3%), systolic blood pressure (7.9%), diabetes (6.9%), antihypertensive medication use (3.0%), and BMI (0.9%) in men. In women, the contributions were in the order of age (54.1%), systolic blood pressure (23.5%), diabetes (13.6%), antihypertensive medication use (5.1%), smoking (3.1%), and BMI (0.6%%). According to age bracket analysis, smoking (51.8~33.7%) was the biggest risk factor, followed in order by age (26.6%) in their 30s and systolic blood pressure (17.3~21.0%) in those older than 40 years in men. In women, the systolic blood pressure (56.2~40.5%) was the main contributor to the risk factors, followed by age (24.0%) in their 30s and diabetes (13.6~32.6%) in those older than 40 years. The contribution of the income level was similar. Therefore, to prevent cardiovascular disease, various programs that reflect the contributions of the risk factors should be developed. Moreover, it is recommended to use the results shown in this study as basic data.