• Bulletin of the Korean Chemical Society
• /
• v.17 no.10
• /
• pp.882-885
• /
• 1996

The 6a10 and 6b10 vibronic bands in the 12A2-12B2 electronic transition of the emission spectra of the benzyl radical obtained using a high resolution Fourier transform spectrometer are rotationally analyzed. The observed rotational contours were fitted by computer simulated rotational contours, providing determination of the variations, ΔA, ΔB, and ΔC of the rotational constants accompanying the vibronic transitions corresponding to each band. The molecular rotational constants A, B, and C are revised for the upper state and for the two lower states, respectively.

• Journal of KIISE:Computer Systems and Theory
• /
• v.27 no.2
• /
• pp.123-134
• /
• 2000

This paper addresses a new triangulation method for constructing surface model from a set of wire-frame contours. The most important problem of contour triangulation is the branching problem, and we provide a new solution for the double branching problem, which occurs frequently in real data. The multiple branching problem is treated as a set of double branchings and an algorithm based on contour merging is developed. Our double branching algorithm is based on partitioning of root contour by Toussiant's polygon triangulation algorithml[14]. Our double branching algorithm produces quite natural surface model even if the branch contours are very complicate in shape. We treat the multiple branching problem as a problem of coarse section sampling in z-direction, and provide a new multiple branching algorithm which iteratively merge a pair of branch contours using imaginary interpolating contours. Our method is a natural and systematic solution for the general branching problem of contour triangulation. The result shows that our method works well even though there are many complicated branches in the object.

• Radiation Oncology Journal
• /
• v.37 no.2
• /
• pp.134-142
• /
• 2019

Purpose: The aim is to study the dependence of deformable based auto-segmentation of head and neck organs-at-risks (OAR) on anatomy matching for a single atlas based system and generate an acceptable set of contours. Methods: A sample of ten patients in neutral neck position and three atlas sets consisting of ten patients each in different head and neck positions were utilized to generate three scenarios representing poor, average and perfect anatomy matching respectively and auto-segmentation was carried out for each scenario. Brainstem, larynx, mandible, cervical oesophagus, oral cavity, pharyngeal muscles, parotids, spinal cord, and trachea were the structures selected for the study. Automatic and oncologist reference contours were compared using the dice similarity index (DSI), Hausdroff distance and variation in the centre of mass (COM). Results: The mean DSI scores for brainstem was good irrespective of the anatomy matching scenarios. The scores for mandible, oral cavity, larynx, parotids, spinal cord, and trachea were unacceptable with poor matching but improved with enhanced bony matching whereas cervical oesophagus and pharyngeal muscles had less than acceptable scores for even perfect matching scenario. HD value and variation in COM decreased with better matching for all the structures. Conclusion: Improved anatomy matching resulted in better segmentation. At least a similar setup can help generate an acceptable set of automatic contours in systems employing single atlas method. Automatic contours from average matching scenario were acceptable for most structures. Importance should be given to head and neck position during atlas generation for a single atlas based system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.7C
• /
• pp.716-725
• /
• 2005

In this paper, we propose a new approach for the reduction of the dynamic false contours, which detects and compensates false contour artifacts adaptively. First, we develop a simple but effective method to select the pixels that are likely to cause the motion artifacts, based on the distribution of pixel values. Then, we merge the selected pixels into several regions using tree structure. Next, we reduce number of gray levels within the regions slightly to reduce the false contours. Note that reducing number of gray levels yield the distortion, thus it is applied only to the selected regions, instead of the whole picture. Intensive simulations on real moving image show that the proposed algorithm alleviates the dynamic false contours effectively with tolerable computational complexity.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.23 no.2
• /
• pp.61-69
• /
• 1981

The paddies in the hillsides in Gonggeun-myeon, Hoingseong-gun, Kangweon-do keep a steep slope and run in and out. A land consolidation in such an area, therefore, will require high ratio of land loss and a large amount of earth moving if it follows the existing design criteria to separate drainage and irrigation ditches in a scheme. Due to the consequent decrease in construction cost, the project has not been envisaged. in order to secure the introduction of small-medium size farm machineries into the paddies, farm plots were planned to be straight and drainage with taking care of topography. Findings from the comparison of methodologies are as follows. 1. In places with a solpe of more than 1/30, a reduction in earth moving can be expected with parallel plots to the contours. 2, For the sake of effective using of farm machineries, it is thought that a plot should be running straight parallel to the contours and the ratio of length and width of a plot be more than six. 3. In places with a slop of more than 1/10, a reduction in earth moving and a effective introduction of farm-machineries can he expected with straight parllel plots to the contours. But it is undesirable to introduce a scheme in this places because of the difficulties in acreage computation and farmers' hesitation. 4. The system with a canal for both irrigation and drainage is highly effective to decrease the ratio of land loss as well as construction cost. 5. Parallel plots to the contours and a canal for both irrigation and drainage are highly effective in the decrease in construct cost. 6. To avoid the subdivision of a cooperation in farming is desirable of a plots, has more than two owners.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.1
• /
• pp.1-8
• /
• 2004

We developed a new PDP gray scale implementation method on the basis of the quantized memory addressing(QMA) principle. We defined three wall charge states; 'fully-on', 'off', and 'half-on', by controlling the width of address pulses. With these three wall charge state, we were able to express 255 level gray scale with only 7 sub-fields. Furthermore, in contrast to the conventional driving methods, the sub-field combinations for any two adjacent gray levels differ by only 1 sub-field, at worst, and therefore, eliminate the dynamic false contours. Since this method use 7 sub-field, the sustain discharge Period is increased by more than $70\%$ compared to the 12 sub-field method which reduces the dynamic false contours.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.12
• /
• pp.142-150
• /
• 1996

Nowadays, as the development paeiod of new products becomes even shorter, the importance of Rapid Prototyping Technology(RPT) has been rapidly increased. The major application of RPT is an early verification of product designs and quick production of prototypes for testing. Moreover, RPT is applied not only as a second tooling process such as mold making and investment casting but also as a creating some physical structure in medical field. Despite the remarkable progress of RPT, it is required to improve various problems resulting from application such as production time, accuracy and materials. This paper presents a laser scan path generation for accuracy of stereolithographicparts The methodology of laser scan path generation is discussed based on the stereolithography, The procedure of this research is as follows : 1) Input laser scanning conditions such as a laser beam diameter and a laser scanning interval, 2) Reconstruct original contours without self intersecting offset, 3) Calculate offset about reconstructed contours, 4) Calculate intersection points between horizontal or vertical lines and offset contours for internal hatch, 5) Decide laser shutter on/off points. The algorithm developed and programmed by C language is verified as an efficient method after testing a number of STL files of mechanical parts.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.33 no.10
• /
• pp.757-766
• /
• 2009

In the present study, the effect of delta-wing vortex generators(DWVG) on the local heat transfer of the plate fin-oval tube was experimentally analyzed for Reynolds numbers for 2000, 2500 and 3200. The local heat transfer coefficient of the fin surface for four type DWVGs was measured by the naphthalene sublimation technique. As the results, the distribution of the heat transfer coefficient at rear of DWVGs showed longitudinal contours for common flow down DWVGs and wavy contours for common flow up DWVGs. The distribution showed many cell type contours at near wall and downstream for all DWVGs. Compared to case without DWVGs in present experimental tests, all DWVGs showed the best enhancement of heat transfer at Re=2000. Of 4 cases of DWVGs, D type showed the best enhancement of heat transfer.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.18 no.1
• /
• pp.63-68
• /
• 2006

Time series of waterline changes during a flood/ebb cycle can be utilized for supplementary data for measuring bottom topography. The waterlines extracted from consecutive images are substituted for depth contours using water level data. The distances between contours are quantified through a rectification image process. This technique is applied to the Keunpoolan beach in the Daeijak Island near Incheon. A camera monitoring technique supported by natural water level changes produces bottom topography with high precision. It is also less time consuming and more economical. The technique also can be utilized effectively to the physical modeling f3r measuring bottom changes in the three dimensional basin.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.4 no.2
• /
• pp.215-224
• /
• 2001

An experimental investigation was conducted on the interaction of vortices over a delta wing with the leading edge extension for three angles of attack($16^{\circ},\; 24^{\circ} \;and\; 28^{\circ}$) at Reynolds number of $1.76{\times}10^6.$ The experimental data included total pressure contours and velocity vectors using 5-hole probe measurements. Constant total pressure coefficient contours show the LEX vortex moves downward and outboard, while the wing vortex exhibited an inboard and upward migration. At near the trailing edge, these vortices reveal a direct interaction between the wing and LEX vortex, featuring a coiling of vortex cores about each other. The combined effect of the interaction of these two vortices and proximity to the wing surface results in the increase of the suction peak. This is in contrast to the result obtained on the delta wing alone configuration, where the effect of the vortex breakdown was manifested. The interaction of the wing and LEX vortices is more pronounced at higher AOA.