• 한국강구조학회 논문집
• /
• 제9권3호통권32호
• /
• pp.309-321
• /
• 1997

차량이 교량을 통과할 때 교량에 발생하는 충격계수는 교량의 설계시 매우 중요한 인자이다. 본 연구에서는 2연속 강판형교의 지간 중앙점에 발생하는 충격계수에 관한 실험 및 해석적 연구를 수행하였다. 교량의 수치해석시 교량과 차량은 3차원으로 모델링하였으며. 교량의 노면조도는 Intelligent Total Station으로 직접 측정하여 사용하였다. 이때 교량의 주형은 보요소, 콘크리트 바닥판은 쉘요소를 사용하고 주형과 콘크리트 바닥판 사이는 Rigid Link를 사용하여 연결시켰다. 교량과 차량 사이의 상호작용을 고려하여 차량의 운동방정식을 유도하였으며, 차량의 여러 가지 주행속도에 따른 교량의 지간 중앙점에서의 충격계수를 구하여 우리나라 및 외국의 시방서 규정과 비교 검토하였다.

• Interaction and multiscale mechanics
• /
• 제5권1호
• /
• pp.1-12
• /
• 2012

Considerable longitudinal rail forces and displacements may develop in continuous welded rail (CWR) track on long-span bridges due to temperature variations. The track stability may be disturbed due to excessive relative displacements between the sleepers and ballast bed and the accompanied reduction in frictional resistance. For high-speed tracks, however, solving these problems by installing rail expansion devices in the track is not an attractive solution as these devices may cause a local disturbance of the vertical track stiffness and track geometry which will require intensive maintenance. With reference to temperature, two actions are considered by the bridge loading standards, the uniform variation in the rail and deck temperature and the temperature gradient in deck. Generally, the effect of temperature gradient has been disregarded in the interaction analysis. This paper mainly deals with the effect of temperature gradient on the track-bridge interaction with respect to the support reaction, rail stresses and stability. The study presented in this paper was not mentioned in the related codes so far.

• Structural Engineering and Mechanics
• /
• 제51권4호
• /
• pp.581-599
• /
• 2014

In this paper the overall dynamic response of simple railway bridges subjected to high-speed trains is investigated numerically based on the mechanical models of simply supported single-span and continuous two-span Bernoulli-Euler beams. Each axle of the train, which is composed of rail cars and passenger cars, is considered as moving concentrated load. Distance, magnitude, and maximum speed of the moving loads are adjusted to real high-speed trains and to load models according to Eurocode 1. Non-dimensional characteristic parameters of the train-bridge interaction system are identified. These parameters permit a spectral representation of the dynamic peak response. Response spectra assist the practicing engineers in evaluating the expected dynamic peak response in the design process of railway bridges without performing time-consuming time history analyses.

• Structural Engineering and Mechanics
• /
• 제82권4호
• /
• pp.435-444
• /
• 2022

This study proposes a novel longitudinal self-centering earthquake resistant system for reinforced concrete (RC) continuous bridges by using superelastic shape memory alloy (SMA) reinforcement and friction dissipation mechanism. The SMA reinforcing bars are implemented in the fixed piers to provide self-recentering forces, while the friction dampers are used at the movable substructures like end abutments to enhance the energy dissipation of the bridge system. A reasonable balance between self-centering and energy dissipation capacities should be well achieved by properly selecting the parameters of the SMA rebars and friction dampers. A two-span continuous bridge with one fixed pier and two abutments is chosen as a prototype for illustration. Different longitudinal earthquake resistant systems including the proposed one in this study are investigated and compared. The results indicate that compared with the designs of over-dissipation (e.g., excessive friction) and over-self-centering (e.g., pure SMAs), the proposed system with balanced design between self-centering and energy dissipation would perform satisfactorily in controlling both the peak and residual displacement ratios of the bridge system.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1444-1451
• /
• 2010

This paper aims for proposed the deflection limit on vibration serviceability of high-speed railway bridges considering the exposed time duration when a train passes a railway bridge. For this purpose, bridge-train transfer function was derived and bridge-train interaction analysis was performed by using the derived function. The vertical acceleration signals of passenger cars obtained from bridge-train interaction analysis were compared with them from the bridge-train transfer function by moving constant force analysis. Therefore it was estimated possible to induce the comfort deflection limit of railway bridge by using bridge-train transfer function. The deflections by moving force of single span bridge and continuous bridge were assumed as sine and haversine wave. The deflection limit on vibration serviceability of high-speed railway bridges considering the exposed time duration can be expanded using bridge-train transfer function and bridge comfort limit considering serviceability due to bridge vibration. And it was compared to other allowable deflection limits of railway bridge design specifications.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.445-450
• /
• 2007

CWR(Continuous Welded Rail) and bridge interaction produce rail force, bridge displacement and rail/bridge relative displacement. Each of these has limitation by many codes. In this paper, analysis of interaction has been carried out by using foreign codes(UIC 774-3 R code of Europe etc.) because there is no code about interaction between rail and bridge in Korea. Recently, railway bridges with CWR has been constructed for structural and economical reasons. When designer plans railway bridges, design a bridge model first and then investigate railway forces and displacement by interaction analysis. If these results go out bounds from limitation, designer plans railway bridges again and again. In this paper, using the parametric study on CWR and railway bridge interaction, railway bridge parameters such as length of bridge span, area of bridge, moment of inertia, stiffness of pier, etc. are presented. It helps preliminary design of railway bridges.

• 한국강구조학회 논문집
• /
• 제19권2호
• /
• pp.233-245
• /
• 2007

AASHTO Standard의 하중분배계수식은 지간과 주형간격이 클수록 안전측으로 나타나지만, 지간과 주형간격이 작으면 비안전측임을 기존의 유한요소 연구에서 밝혀졌다. AASHTO LRFD는 주형간격, 지간, 바닥판 두께, 그리고 종방향 강성에 따른 분배계수식을 규정하고는 있으나, 이 식은 초기에 알려지지 않은 종방향 강성 때문에 정확한 하중분배계수 값을 결정하기 위해서는 반복절차가 요구되어진다. 따라서 본 연구에서는 2경간 연속 I-형교의 내측 및 외측주형에 대하여 반복설계 과정을 필요로 하지 않는 하중분배계수 간략식을 제안한다. 주형간격, 주형길이, 바닥판 두께, 바닥판 폭, 그리고 브레이싱의 간격 및 크기의 영향을 조사하기 위하여 유한요소법을 사용하였다. GTSTRUDL을 사용하여 교량 상부구조를 편심 보모델로 이상화 하였으며, 바닥판은 쉘요소, 거더는 보요소, 그리고 이 요소들의 합성거동을 위하여 강절링크로 연결하였다. 이 해석으로부터 얻은 분배계수를 AASHTO Standard와 LRFD 방법과 비교하였으며, 다른 매개변수들에 비해 거더간격, 지간, 그리고 바닥판 두께는 분배계수에 미치는 영향이 크게 나타났다. 내측주형에서 LRFD의 분배계수는 대부분의 경우에 안전측으로 나타났지만, 외측주형에서는 지간이 길 경우 비안전측으로 나타났다. 또한, 회귀분석을 수행하여 하중분배계수 간략식을 개발하였으며, 이 식에 의한 하중분배계수는 유한요소결과 보다는 항상 안전측이면서, AASHTO LRFD 보다는 일반적으로 작게 나타났다. 제안된 간략식은 2경간 연속 I-형교에 대한 실제 하중분배계수 산정에서 교량설계자들에게 도움을 줄 것이다.

• Smart Structures and Systems
• /
• 제19권6호
• /
• pp.587-599
• /
• 2017

This paper introduces an approach to the realization of an ICT-based bridge remote monitoring system that enables real-time monitoring and controlled adjustments for unexpected heavy loads and also for damaging earthquakes or typhoons. In this paper, an integrated bridge remote monitoring system called the "Intelligent Bridge", which consists of a stand-alone monitoring system (SMS) and a web-based Internet monitoring system(IMS), was developed for not only bridge maintenance but also as an application for a para-stressing bridge system. To verify the possibility of controlling the actual structural performance of an "Intelligent Bridge", a model 2-span continuous cable-stayed bridge with adjustable cables was constructed. The experimental results demonstrate that the implemented monitoring system supplies detailed and accurate information about bridge behaviour for further evaluation and diagnosis, and it also opens up prospects for future application of a web-based remote system to actually adjust in-service bridges under field conditions.

• 한국공간구조학회논문집
• /
• 제4권1호
• /
• pp.49-59
• /
• 2004

이전 논문에서 미 중부 및 동남부 지역의 전형적인 다경간 단순효와 다경간 강거더 연속교의 지진 응답을 연구하였으며, 이런 교량에서 덱 사이의 충돌과 큰 연성이 요구되는 기둥은 취약하여 손상을 입을 수 있다는 것을 보여주었다. 더구나, 고정 및 가동 교조장치는 강한 지진운동에 쉽게 피해를 입을 수 있다. 이 논문에서는 몇 개의 개선된 고무 베어링, 납-고무 베어링 그리고 제지선을 사용하여 전형적인 다경간 단순교와 다경간 강거더 연속교의 지진 응답을 평가하였다. 납-고무 베어링은 지진에 취약한 전형적인 교량의 응답을 개선하는데 효과적인 방법으로 평가되었다. 고무 베어링은 기둥의 요구량을 줄이지만, 다경간 단순교 강거더 교량에서 덱 사이의 강한 충돌을 유발시킨다. 제지선은 일반적으로 사용되지만 다경간 단순교와 다경간 연속교의 지진에 대한 손상을 절감하는데 중간정도의 효과를 보여주었다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2001년도 봄 학술발표회 논문집
• /
• pp.173-180
• /
• 2001

In this study steel box girders used as main members of a two span continuous steel bridge, are optimally designed by a Load and Resistance Factor Design method(LRFD) using an numerical optimization method. The width, height, web thickness and flange thickness of the main girder are set as design variables, and light weight design is attempted by choosing the cross-sectional area as an object function. We studied the results of steel box girders and compared with those of 1-type girders. The main program is coded with C++ and connected with optimization modul ADS. which is coded with FORTRAN.