• 한국자동차공학회논문집
• /
• 제7권9호
• /
• pp.97-104
• /
• 1999

Brake squeal noise has been a problem since the early days of motoring . It is important to obtain vibration mode shape for reduction of brake noise . Stroboscopic Electronic Speckle Pattern Interferometry is a very powerful measuring method for study of vibrating objects in static state compared with conventional methods because this method can give both resonance frequency and quantitative visualization of vibration mode shape at the same time. In this paper, we performed qualitative visualization and quantitative analysis of vibration mode shpae of disk brake by using stroboscopic ESPI and phase shifting method. The stroboscopic wavefronts are obtained by chopping continuous wave laser beam using acousto-optic modulator .Experiments were performed at the same constraint conditions as disk brake of the practical vehicle as far as possible. The experimental results of this paper show quantitative measurement of vibration mode shape and quantiative visualization of vibration amplitude of disk brake with 3D plotting.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.1010-1014
• /
• 2001

A severe strip vibration in continuous galvanizing line facilities of the steel companies has sometimes occurred due to the exceeding wearing of the roll bush and bearing. This vibration brings on the lack of uniform coating thickness in steel plate. As a result, the total maintenance and product costs in this factory are increased by the shortage of operation time for the replacement of bush, bearings and these components. In this study, the vibration characteristics of this strip are investigated by the FEM using ANSYS. Also the vibration measurement of strip and its structure performed by the laser Doppler vibrometer(LDV) and accelerometers are compared to theoretical analysis results.

• Structural Engineering and Mechanics
• /
• 제14권6호
• /
• pp.733-738
• /
• 2002

A simplified rational method is developed to evaluate transverse earthquake-induced forces in continuous bridges. This method models the bridge as a beam on elastic foundation, and assumes a sinusoidal curve for both vibration mode shape and deflected shape in the transverse direction. The principle of minimum total potential is used to calculate the displacements and the earthquake-induced forces in the transverse direction. This method is concise and easy to apply, and hence, offers an attractive alternative to a lengthy and time consuming three dimensional modeling of the bridge as given by AASHTO under its Single Mode Spectral Analysis Method.

• 소음진동
• /
• 제7권1호
• /
• pp.135-142
• /
• 1997

This paper presents a digital modeling technique of the distributed system. The basic idea of the proposed technique is to discretize a continuous system with respect to the spatial coordinates using bilinear method. The response of the discretized system is analyzed by Laplace transform and z-transform. The computational results in torsional shaft and Timoshenko beam using the proposed technique are compared with the exact solutions and the results of finite element method.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1994년도 Proceedings of the Korea Automatic Control Conference, 9th (KACC) ; Taejeon, Korea; 17-20 Oct. 1994
• /
• pp.721-724
• /
• 1994

This paper proposes a continuous hitting by a flexible link hammer. This hammer system is used only the first mode of vibration for a desired hitting. The input of the hammer driver for a continuous hitting is obtained from numerical solutions of two sets of non-linear simultaneous equations which satisfy the hitting conditions. Being too complicated, these numerical calculations are not useful for online processing. Therefore, the multi-layered neural networks are applied to the generation of the input patterns of the hammer driver. The trained network outputs agree well to the numerical solutions.

• Structural Engineering and Mechanics
• /
• 제7권4호
• /
• pp.361-375
• /
• 1999

This paper presents an analytic method of examining the out-of-plane vibration of continuous curved beam on periodical supports. The orthogonality of two distinct sets of mode shape functions is derived. The forced vibration of beam due to moving loads is examined. Two types of moving loads, which are concentrated load and uniformly distributed load, are considered. The response characteristics of beam induced by these loads are investigated as well.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1998년도 봄 학술발표회 논문집
• /
• pp.335-340
• /
• 1998

The apparently different physical problems of lateral vibration and elastic stability of a linear member are limiting cases of a single phenomenon, the more general expression being the mode of vibration with end thrust. For a single-span beam-column, it is generally known that the square of the frequency of lateral vibration is approximately linearly related to compressive axial force. In this paper the relationship between the frequency and axial force of multi-span compression members is investigated by means of the finite element method.

• 한국정밀공학회지
• /
• 제21권11호
• /
• pp.38-45
• /
• 2004

This paper discusses the minimum cutting thickness with a continuous chip in sub-micrometer order precision diamond cutting. An ultra precision cutting model is proposed, in which the tool edge radius and the friction coefficient are the principal factors determining the minimum cutting thickness. The experimental results verify the proposed model and provide various supporting evidence. In order to reduce the minimum cutting thickness a vibration cutting method is applied, and the effects are investigated through a series of experiments under the same conditions as conventional cutting method.

• 한국구조물진단유지관리공학회 논문집
• /
• 제3권2호
• /
• pp.147-154
• /
• 1999

A new approach to conducting the vibration parameters identification algorithm is proposed. The approach employs the concept of modal amplitude ratio implemented in a mode shape estimation. The accuracy of the improved Ibrahim Time Domain identification algorithm in extracting structural modal parameters from free response functions has been studied using computer simulated data for 9 stations on the two-span continuous beam. Simulated responses from the lumped and distributed parameter system demonstrate that this algorithm produces excellent results, even in the 300% noise response.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 추계학술대회 논문집
• /
• pp.463-470
• /
• 1999

In this paper, a numerical method for evaluating the efficiency of vibration reduction of substructure under slab track is developed for optimal design of floating slab track. The equation of motion for train and track interaction system is derived by applying compatibility condition at the contact points between wheels and rails. The train is modelled by 3-masses system and the track by continuous support beam system. Numerical analyses are carried out to investigate the effect of train speed, stiffness and damping of slab-pad, and track irregularity upon vibration reduction in substructure under the track.