• The Journal of Engineering Geology
• /
• v.16 no.2 s.48
• /
• pp.135-143
• /
• 2006

This study presents the results of a series of laboratory scale slope failure experiments aimed at clarifying the process and the condition leading to the initiation of rainfall-induced slope failures. For the evaluation of hydrologic response of the model slopes in relation the process of failure initiation, measurements were focused on the changes in volumetric water content during the initiation process. The process leading to failure initiation commences by the development of a seepage face. It appears reasonable to conclude that slope failures are a consequence of the instability of seepage area formed at the slope surface during rainfall period. Therefore, this demonstrates the importance of monitoring the development seepage area for useful prediction about the timing of a particular failure event. The hydrologic response of soil slopes leading to failure initiation is characterized by three phases (phase I, II and III) of significant increase in volumetric water content in association with the ingress of wetting front and the rise of groundwater level within the slope. The period of phase III increase in volumetric water content can be used to initiate advance warning towards a failure initiation event. Therefore, for the concept outlined above, direct and continuous monitoring of the change in volumetric water content is likely to provide the possibility for the development of a reliable and effective means of predicting the occurrence of rainfall-induced slope failures.

• Archives of design research
• /
• v.19 no.2 s.64
• /
• pp.91-98
• /
• 2006

The product convergence and complex application environment raise the need of multi-modal interface which enables us to interact products through various human senses. The sense of vision has been used predominantly more than any other senses for the traditional and general information gathering situation, but in the future which will be developed based on the digital network technology, the practical use of the various senses will be desired for more convenient and rational usage of the information appliances. The sense of auditory which possibility of practical use is becoming higher than ever with the sense of vision, the possible usage will be developed broader and in the various ways in the future. Based on this situation, the characteristics of the written language and the colloquial language and the comparative analysis of the difference between male and female's reaction for each language were examined through this study. To achieve this purpose, the literature research about the diverse components of the language system was peformed. Then, some peculiar characters of the sense of vision and auditory were reviewed and the appropriate experimentation was planned and carried out. The result of the accomplished experimentation was examined by the objective analysis method. The main results of this study are as follows: first, the reaction time for written language is shorter than colloquial language, second, there is a partial difference between the male's and female's reaction for those two stimuli, third, there is no selection bias between the sense of sight and the sense of hearing. I think the continuous development of the broad and diverse ways of study for various senses is needed based on this study.

• Archives of design research
• /
• v.17 no.3
• /
• pp.431-440
• /
• 2004

Environment has formed characters of one society and the society has formed its characteristic cultural behaviors. Oppositely cultural behaviors make the characteristic products like environment and space products. It gives the idea that we can create cultural space by examining cultural characteristics. This research bases on the 5 cultural dimensions of Geert Hofstede to inspect cultural quality of Korea and the 10 cultural factors of Edward. T. Hall in order not to omit some part of cultural characters. From April 2004, KTX which is originated from TGV of France began toroll in Korea. It is interesting that the same interior of train is used by two different cultures. The method to find out the special quality of transportation culture of Korea passed 5 steps like following; 1) making a questionnaire to understand general concepts 2) observation to make dear what are the special behaviors in the interior of train 3) comparison valuation with marking sheet of the interiors of KTX and HSR in order to find out which space Korean people prefer 4) comparison of behaviors in the interior of KTX and TGV 5) Interviewing and surveying the opinions of passengers of KTX. With these methods it would be possible to seek out the characters, preferencesand needs for the interior space of train. There were remarkable things like following 1) importance of privacy from the other's eyes 2) seriousness of individual seat because of the short term transportation 3) necessity of continuous information because of 'Uncertainty Avoidance Culture' 4) absence of moving 5) requirement of bright and comfortable interior like one's inner room 6) preference to take a seat as a group with their friends or family due to 'Collective Culture' 7) self-defense and self-protection of one's baggage because of 'Uncertainty Avoidance Culture'. With these discoveries this research suggests guidelines to design interior of train of Korea.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.1
• /
• pp.81-88
• /
• 2020

Flight data recorder is a equipment that records data required for investigation of aircraft accidents and should be developed in compliance with the ED-112A standard. Unlike general data storage device, flight data recorder must be able to recover data after an aircraft accident, requiring a housing and a memory board to protect data in extreme environments. To attain this performance, we designed a housing that can withstand the test by analyzing the physical environment of the impact, shear/tensile, penetration resistance and static crush test of the crash survival test and minimized the size and weight compared to the existing one in consideration of the installation of the aircraft in this paper. Insulation material and thermal block material were applied to endure high and low temperature fire so that the internal temperature does not rise above 150℃ even in 260℃, 10 hour environment. In addition, the memory board is designed to minimize the size and we devise a hoping programming method to prevent continuous data loss of more than 16 seconds. Through this, Crash protected memory module that satisfies ED-112A was completed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.12
• /
• pp.5477-5485
• /
• 2011

This study comparatively analyzed the instrumentation and the voicing structure, which were shown in the film music titled "Star Wars-Main Title" by John Williams(1932~), with analytical technique that the writer mapped out, and aimed to discover the progression principle in orchestration based on the results. Also, it applied a functional part-division method that was classified and distributed into 3 functional parts according to auditory cognitive level as for each of functional elements such as the musical element. And, it made it pattern for the vertical structure and the voicing structure in musical instruments, which were distributed to each functional part based on this, and comparatively analyzed the standard point in a change which were shown according to progression of music, namely, the operating technique. As for the results of this study, first, each theme has specific instrumentation pattern. Unity was emphasized by consistently organizing those things in exposition, reprise, and recapitulation of each theme. To reinforce diversity, an attempt was made such as adding and reducing auxiliary instruments in the middle part and the rear part. Second, even in a change of instrumentation pattern by passage in accordance with a change in theme amid each part, the same instrumental group was organized in the middle part, thereby having maintained unity. Third, to strengthen diversity by clause, which is forming each theme, a continuous change in voicing pattern was created by adding or omitting a part. Fourth, the voicing concentration was maintained the structure of "thinness-thickness" in the whole musical piece. However, in part 2 that is repeated theme 3, diversity was pursued with a unique change of "thickness-thickness." Fifth, in part 4 that is indicated theme 4, the other diversity was intensified with the inverted range in the front part and the middle part. Accordingly, based on the conclusions that were indicated in this work, it is desired to be conducive to understanding the horizontal consideration and the progression principle of orchestration.

• Resources Recycling
• /
• v.5 no.3
• /
• pp.65-72
• /
• 1996

Colloidal calcium wrbonate(diametcr 0.02-0 09 m~wja s developed to maintain the mamenl of pnriide formatio~>w ~lhoutsurlace trealment. The control factors of particle size and optimum condiliuna for compound fam*tition has not bccn studiedyet. This shldy war aimed at developing a method fur compounding colloidal calcium carbonfcte to cnl~hol cubic calciumcarbonate, and then compounding the b-o types oI precipitated calcium wrbonatc under optimum wndilrans Calc~umhydroxide was calcinated at 1, lWC far two hours, md then hydrated for 30 minutes at t i i O rprn and ambiznt temperahlle.Two-liter suspension was subjected to the contact with carbon dioxide at l5"C, 600 ipxn and C0= injection in the rate of 1 Umin Two types of dcium carbonate(cuhic calcium carbonatc(0 24.9 pm) md collnidd calcium mhnnate (0.02-0 09 pm))were compounded by "wing the concentrations of calcium oxide and ihe suspension were compounded. It was found that theoptimum concentrations of each suspensions were 5 wt % and 2.5 \I*.% respectively. ' h c key control factor af thc parlicle slzcdislribution was the concenkation al the suspension. The size of compounded particles was measured by a Zcla S k r 'fieaverage particle size of the cubic calcium carbonate aas 223.4 nm(0.223 pm), and that of thc colloidal a~lciumc arbonate was93.6 nm (0.093 km). Ihe particle sizc was evenly cantlolled on a stdblc basis in an H, O reaction system.asis in an H, O reaction system.

• Journal of Intelligence and Information Systems
• /
• v.19 no.2
• /
• pp.55-71
• /
• 2013

The prediction model is the main factor affecting the performance of a knowledge-based system for bankruptcy prediction. Earlier studies on prediction modeling have focused on the building of a single best model using statistical and artificial intelligence techniques. However, since the mid-1980s, integration of multiple techniques (hybrid techniques) and, by extension, combinations of the outputs of several models (ensemble techniques) have, according to the experimental results, generally outperformed individual models. An ensemble is a technique that constructs a set of multiple models, combines their outputs, and produces one final prediction. The way in which the outputs of ensemble members are combined is one of the important issues affecting prediction accuracy. A variety of combination schemes have been proposed in order to improve prediction performance in ensembles. Each combination scheme has advantages and limitations, and can be influenced by domain and circumstance. Accordingly, decisions on the most appropriate combination scheme in a given domain and contingency are very difficult. This paper proposes a confidence-based selection approach as part of an ensemble bankruptcy-prediction scheme that can measure unified confidence, even if ensemble members produce different types of continuous-valued outputs. The present experimental results show that when varying the number of models to combine, according to the creation type of ensemble members, the proposed combination method offers the best performance in the ensemble having the largest number of models, even when compared with the methods most often employed in bankruptcy prediction.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.4
• /
• pp.1968-1975
• /
• 2011

This study was performed to propose a development guide for the periphery of local industrial park in the region of Hongseng-gun located at the mid-west of Chungnam province., which is a representative agrarian society, has been approached to a super-aged society where the region shows a continuous decrease in population, and the composition ratio of old ages is about 17.1%. Also, the region is a period of a low ebb due to the traditional agriculture based industrial structure in producing mainly simple productions. Many local governments in agrarian and fishing regions have been efforted for luring some businesses in their regions by constructing industrial complex competitively in order to solve such structural problems in such local regions. However, in some cases, these efforts cause certain destructions in the local original natural environment due to such development of industrial complex and the decrease in the settlement environment of residents. The objective of this study is to establish a local development plan for building the sustainable and comfortable settlement environments based on the settlement of the residents and the labors in such industrial complex by preventing sprawl developments in the construction of general industrial complex. This study was processed as following procedures. First, this study drew the trend in the change of the local society of H-gun through collecting literatures and analyzing it. Second, this study proposed a proper level of settlement environments required to the development of surroundings in such industrial complex based on the survey of the consciousness of residents using a statistical method. Finally, this study proposed a development guide for the surroundings based on the proposed level of settlement environments.

• Polymer(Korea)
• /
• v.35 no.4
• /
• pp.363-369
• /
• 2011

To study the effect of incorporation of a surface crosslinking layer on a crosslinked poly (sodium acrylate) (cPSA) absorbent with ethylene glycol dimethacrylate CEGDMA), we synthesized several surface crosslinked cPSAs with EGDMA by an inverse emulsion polymerization method to delay the absorption of excess water in concrete, Liquid paraffin was used as a continuous phase. cPSA was synthesized with acrylic acid (AA) neutralized with aqueous 8 M sodium hydroxide solution as a monomer, N,N-methylene bisacrylamide (MBA) as crosslinking agent and ammonium persulfate (APS) and sodium metabisulfite (SMBS) as a redox initiator system by inverse emulsion polymerization. FTIR spectroscopy was used to characterize $Ca^{2+}$ ion interaction with cPSA and cPSA-EGDMAs. The swelling ratios of synthesized absorbents were evaluated from the absorption in deionized water, cement saturated aqueous solution and aqueous solution of calcium hydroxide (pH 12). Equilibrium swelling times for cPSA and surface crosslinked cPSA with EGDMA were 2 and 3 hrs, respectively. We also observed an increase in setting time of the cement and an increase in the compressive strength of mortar by addition of the synthesized cPSA-EGDMA.

• Journal of Chest Surgery
• /
• v.32 no.3
• /
• pp.287-293
• /
• 1999

Background: Medical treatment of multiple drug resistant(MDR) pulmonary tuberculosis has been quite unsuccessful. We analyzed our experience to identify the benefits and complications of the pulmonary resection in MDR pulmonary tuberculosis. Material and Method: A retrospective review was performed in 27 patients who unerwent pulmonary resection for MDR pulmonary tuberculosis between January 1994 and March 1998. Mean age was 40 years and the average history of diagnosis prior to surgery was 3.1 years. All had resistance to an average of 4.4 drugs, and received second line drugs selected according to the drug sensitivity test. Most patients (93%) had cavitary lesions as the main focus. Bilateral lesions were identified in 19 patients (70%), however, the main focus was recognized in one side of the lung. Eleven patients (41%) were converted to negative sputum smear and/or culture before surgery. Result: Pneumonectomy was performed in 9 patients, lobectomy in 16 and segmentectomy in 2. There was no operative mortality. Morbidity had occurred in 7 patients (26%), prolonged air leak in 3 patients, reoperation due to bleeding in 2, bronchopleural fistula in 1, and reversible neurologic defect in 1. Median follow up period was 15 months (3-45 months). Sputum negative conversion was initially achieved in 22 patients (82%), and with continuous postopertive chemotherapy negative conversion was achieved in other 4 patients (14%). Only one pneumonectized patient (4%) failed due to considerable contralateral cavity. Conclusion: For patients with localized MDR pulmonary tuberculosis and with adequate pulmonary reserve function, surgical pulmonary resection combined with appropriate pre and postoperative anti-tuberculosis chemotherapy can achieve high success rate with acceptable morbidity.