• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.2 s.245
• /
• pp.164-170
• /
• 2006

To prevent the numerical instabilities in topology optimization, continuous approximation of material distribution (CAMD) is proposed to the homogenization design method (HDM) and the simple isotropic material with penalization (SIMP) method. The continuous FE approximation of design variables including high order elements is applied to the formulation of SIMP method. Numerical examples are presented to compare the efficiency of CAMD both in HDM and SIMP.

• Architectural research
• /
• v.2 no.1
• /
• pp.47-54
• /
• 2000

The critical load of a continuous compression member was determined by the beam-analogy method. The proposed method utilizes the stress-analysis results of the analogous continuous beam, where imaginary concentrated lateral load changing its direction is applied at each midspan. The proposed method gives a lower bound error of critical load and can predict the span that buckles first. The effective length factors for braced frame columns can be easily determined by the present method, but result in the upper bound errors in all cases, which can lead to a conservative structural design.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.12
• /
• pp.19-26
• /
• 2016

In this paper, we propose an efficient design method for a thermal camera with continuous zoom based on the research and manufacturing experience of the thermal camera. In addition, it is divided into system design method, optical design method, mechanical design method, and electronic design method. First, we propose an effective NUC compensation method and a lens-specific sensitivity design method in terms of system. Second, we propose a zoom trajectory design method considering the temperature effect on the optical aspect. Third, it suggests the minimization of optical axis shaking between magnification conversion in terms of mechanism. Finally, we propose a lens-specific temperature compensation method and a speed conversion algorithm according to the zoom interval as an electronic aspect.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.9 no.6
• /
• pp.1-6
• /
• 2010

Patterned optical components are widely used for optical products such as LCD and lighting. Since CCFL was used as a light source in the products, prism films having linear continuous optical patterns were widely used. However, LED which is a dot light source is popular recently, therefore, the optical products need new optical components having non-continuous optical patterns. Indentation machining method is a powerful method for machining of non-continuous pattern. When a copper mold and a brass mold were machined by this method, severe plastic deformation called pile-up was observed around the patterns. Since pile-up has negative relationship to ductility, this deformation can be eliminated by annealing treatment which makes the materials ductile. No plastic deformation occurred when machined after annealing at $600{^{\circ}C}$ and $575{^{\circ}C}$ for copper and brass, respectively. Finally, non-continuous optical patterns with high quality were machined on a copper mold and a brass mold successively.

• Korean Journal of Computational Design and Engineering
• /
• v.15 no.2
• /
• pp.85-93
• /
• 2010

This paper proposes a CAE data translation and visualization technique that can verify time-varying continuous analysis simulation in a virtual reality (VR) environment. In previous research, the use of CAE analysis data has been problematic because of the lack of any interactive simulation controls for visualizing continuous simulation data. Moreover, the research on post-processing methods for real-time verification of CAE analysis data has not been sufficient. We therefore propose a scene graph based visualization method and a post-processing method for supporting interoperability of continuous CAE analysis data. These methods can continuously visualize static analysis data independently of any timeline; it can also continuously visualize dynamic analysis data that varies in relation to the timeline. The visualization system for continuous simulation data, which includes a CAE middleware that interfaces with various formats of CAE analysis data as well as functions for visualizing continuous simulation data and operational functions, enables users to verify simulation results with more realistic scenes. We also use the system to do a performance evaluation with regard to the visualization of continuous simulation data.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.52 no.5
• /
• pp.19-26
• /
• 2010

This study was conducted to find out the reasonable optimum design method of agricultural reinforced concrete structures. Selected design variables are the dimension of concrete section, reinforced steel area, and objective function is formulated by cost function. To test the reliability, efficiency, possibility of application and reasonability of optimum design method, both continuous optimization method and mixed-discrete optimization method were applied to the design of reinforced concrete superstructure of aqueduct and application results were discussed. It is proved that mixed-discrete optimization method is more reliable, efficient and reasonable than continuous optimization method for the optimum design of reinforced concrete agricultural structures.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.8
• /
• pp.84-93
• /
• 2010

This paper describes a method of visualization and fast estimation of parameter in continuous time signal. The parameter estimation method of this paper directly estimate the parameters on the basis of the discrete Fourier transform. Also, this paper present to efficient visualization method of dominant parameters obtained in continuous time signal. The proposed methods are applied to test functions with three dominant modes. The results show that the proposed methods are highly applicable to parameter estimation and visualization in continuous time signal.

• The Journal of the Korea Contents Association
• /
• v.14 no.10
• /
• pp.454-462
• /
• 2014

With the development of location aware technologies and mobile devices, location-based services have been studied. To provide location-based services, many researchers proposed methods for processing various query types with Mapreduce(MR). One of the proposed methods, is a Reverse k-nearest neighbor(RkNN) query processing method with MR. However, the existing methods spend too much cost to process the continuous RkNN query. In this paper, we propose an efficient continuous RkNN query processing method with MR to resolve the problems of the existing methods. The proposed method uses the 60-degree-pruning method. The proposed method does not need to reprocess the query for continuous query processing because the proposed method draws and monitors the monitoring area including the candidate objects of a RkNN query. In order to show the superiority of the proposed method, we compare it with the query processing performance of the existing method.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.12
• /
• pp.202-211
• /
• 1998

The present paper proposes a modal analysis procedure to obtain exact modal parameters (natural frequencies, damping ratios, eigenvectors) for general, non-uniform beam-like structures. The proposed method includes a derivation of the system dynamic matrix for a Timoshenko beam element. The proposed method provides not only exact modal parameters but also exact frequency response functions (FRFs) for general beam structures. A time domain analysis method is also proposed. Two examples are provided for validating and illustrating the proposed method. The first numerical example compares the proposed method with FEM. The second example deals with a non-uniform beam structure supported in joints with damping property. The numerical study proves that the proposed method is useful for the dynamic analysis of continuous systems consisting of beam-like structures.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.46 no.2
• /
• pp.77-89
• /
• 2004

This study was carried out to find out the reasonable optimum design method for the design of prestressed concrete structures. The optimum design problems were formulated and computer programs to solve these problems were developed. To test the reliablity, efficiency, possibility of application and reasonablity of optimum design problems and computer programs, both continuous optimization method and mixed-discrete optimization method were applied to the design of prestressed concrete composite girder and application results were discussed. It is proved that mixed-discrete optimization method is more reliable, efficient and reasonable than continuous optimization method for the optimum design of prestressed concrete structures.