• Bulletin of the Korean Chemical Society
• /
• 제15권9호
• /
• pp.786-791
• /
• 1994

A simple and rapid sample pretreatment process necessary for determination of metal oxides in water was proposed. Samples were injected into the continuous-flow tube installed inside the microwave oven and the treated samples were cooled before entered to the Ion Chromatography (IC) or Inductively Coupled Plasma (ICP). By coupling this microwave digestion system with IC or ICP, a fully automatic analytical procedures may be easily established. In this study, two different types of digestion methods were considered; the open tubing method (OTM) and the restraint tubing method (RTM). The RTM was proved to be 3 times faster in digestion period and 10 times higher in detection range than the OTM. Validation of proposed sample digestion system was carried out by using an ICP. The results showed that both of continuous-flow methods, the OTM and the RTM were comparable in accuracies with the conventional batch-type vessel digestion method.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2003년도 생물공학의 동향(XIII)
• /
• pp.485-489
• /
• 2003

Enzymatic hydrolysis of egg yolk Protein was carried out in continuous packed column reactor Five supports for enzyme immobilization were evaluated in this study. We investigated the optimum operation variables - pH, temperature, and flow rate in continuous reactor operation.

• 디지털융복합연구
• /
• 제15권9호
• /
• pp.415-425
• /
• 2017

본 연구는 모바일 소셜 네트워크 게임에 대한 지각된 즐거움과 이용자 특성이 지속적 이용의도에 미치는 영향관계를 살펴보고, 이러한 과정에서 이용자들의 플로우 경험이 매개적 역할을 하는지에 대해 실증적으로 확인해보고자 진행되었다. 이를 위해 남 여 대학생 244명의 설문조사 데이터를 바탕으로 연구를 진행하였다. 연구결과 첫째, 모바일 소셜 네트워크 게임에 대한 지각된 즐거움과 이용자 특성 즉, 자기효능감과 혁신성향 모두 지속적 이용의도에 정(+)의 영향을 미치는 것으로 확인되었다. 둘째, 모바일 소셜 네트워크 게임에 대한 지각된 즐거움과 이용자 특성 즉, 자기효능감과 혁신성향이 지속적 이용의도에 미치는 영향에 있어 플로우 경험이 매개 역할을 하고 있는 것으로 확인되었다. 이러한 결과는 모바일 소셜 네트워크 게임 산업의 지속적인 발전을 위한 양질의 게임 콘텐츠 개발이나 마케팅 전략 수립 시 유용한 기초자료로 활용될 수 있을 것이라 기대한다. 더불어 향후 연구에서는 보다 다양한 연령대를 대상으로 연구의 일반화가 이루어질 수 있길 기대한다.

• Journal of Biosystems Engineering
• /
• 제23권5호
• /
• pp.481-490
• /
• 1998

A computer vision system to measure low flow rate of solid particles was developed and tested to examine its performance with various sized 7 kinds of seeds, perilla, mung bean, paddy, small red bean, black soybean, Cuba bean and small potato tuber. The test was performed for two types of particle flow, continuous and discontinuous. For the continuous flow tested with perilla, mung bean and paddy, the tests resulted correlation coefficients for the flow rates measured by the computer vision and direct method about 0.98. Average errors of the computer vision measurement were in a range of 6∼9%. For the discontinuous flow tested with small red bean, black soybean, Cuba bean and small potato tuber, the tests resulted correlation coefficients for the flow rates measured by the computer vision and direct method 0.98∼0.99. Average errors of the computer vision measurement were in a range of 5∼10%. Performance of the computer vision system was compared with that of the conventional optical sensor to count particles in discontinuous flow. The comparison was done with black soybean, Cuba bean and small potato tuber, and resulted that the computer vision has much better performance than the optical sensor in a sense of precision of the measurement.

• 한국항공운항학회지
• /
• 제19권2호
• /
• pp.58-63
• /
• 2011

A Continuous Descent Approach(CDA) is defined as a simple, cost-effective, noise and emission abatement technique for any powered aircraft on approach. CDA also can be optimised within energy, speed and safety constraints by avoiding unnecessary flap, air brake and engine thrust. This study includes comparison on fuel consumption between Continuous Descent type and Step Down type by using flight data. In particular, we investigated fuel flow per hour, calibrated airspeed and pressure altitude for all flight time. During descent flight, the fuel consumption of Continuous Descent type was less than the fuel consumption of Step Down type.

• Advances in nano research
• /
• 제13권4호
• /
• pp.341-350
• /
• 2022

The continuous elements method, also known as the dynamic stiffness method, is effective for solving structural dynamics problems, especially over a large frequency range. Before applying this method to fluid-structure interactions, it is advisable to check its validity for pure acoustics, without considering the different coupling parameters. This paper describes a procedure for taking wave propagation into account in the formulation of a Dynamic Stiffness Matrix. The procedure is presented in the context of the harmonic response of acoustic pressure. This development was validated by comparing the harmonic response calculations performed using the continuous element model with the analytical solution. In addition, this paper illustrates the application of this method to a simple compressible flow problem, since it has been applied solely to structural problems to date.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 1999년도 제19회 KOSCO SYMPOSIUM 논문집
• /
• pp.129-138
• /
• 1999

In this paper, our main issue is that establishing the control procedure of continuous gas flow rate according to combustion fan RPM. For this, first, we decide the optimum operating condition of gas swirl burner through analysis of combustion characteristics - thermal efficiency, combustion efficiency and exhaust gases such as CO, $CO_{2}$, $O_{2}$, $NO_{x}$ and THC. Second, fuel gas flow rate of gas valve is decided with considering excess air ratio and combustion fan RPM is decided by the target of combustion air flow rate. Finally, experimental operating equation is acquired by regression for gas valve and combustion fan. This equation is the control equation of continuous gas flow rate and always gas flow rate is decided by combustion fan operating RPM.

• 설비공학논문집
• /
• 제3권1호
• /
• pp.1-10
• /
• 1991

The purpose of this study is to lay groundwork for a complete analysis of two component flow by analyzing a single component flow made of continuous fluid without dispersed phase. In order to achieve uniform velocity distributions which are desirable in designing an optimum spray column direct contact heat exchanger, the influence of injection nozzle orientation has been investigated for axial and radial injections. The results that radial injection ensures more uniform velocity distributions compared to the axial case. The flow characteristics in a spray column have been investigated with various L/D values and inlet velocities, the most uniform internal velocity distributions have been obtained for the case of L/D=10 and 0.1m/sec. In the present investigation, it is shown that radial injection method for the continuous flow is advantageous in obtaining desirable uniform velocity distributions in a spray column. It is also found that as the value of L/D increases and the inlet velocity decreases, the flow improves to be better uniform velocity distributions.

• 대한기계학회논문집A
• /
• 제29권1호
• /
• pp.53-58
• /
• 2005

We present a high-throughput continuous cell separation chip using hydrodynamic dielectrophoresis (DEP) process. The continuous cell separation chip uses three planar electrodes in a separation channel, where the positive DEP cells are moved away from the central streamline while the negative DEP cells remain in the central streamline. In the experimental study, we use the mixture of viable (live) and nonviable (dead) yeast cells in order to obtain the continuous cell separation conditions. For the conditions of the electric fields frequency of 5MHz and the medium conductivity of $5{\mu}S/cm$, the fabricated chip performs a continuous separation of the yeast cell mixture at the varying flow-rate in the range of $0.1{\sim}{\mu{\ell}/min$.; thereby, resulting in the purity ranges of $95.9{\sim}97.3\%\;and\;64.5{\sim}74.3\%$ respectively for the viable and nonviable yeast cells. present chip demonstrates the constant cell separation performance for varying mixture flow-rates.

• Asia pacific journal of information systems
• /
• 제32권2호
• /
• pp.249-274
• /
• 2022

This study is to focuses on users' attitudes toward augmented reality games. Based on the Technology Acceptance Model (TAM) and Flow theory, continuous usage intention was set as a dependent variable, and immersion was set as a mediating variable. As independent variables, spatial presence, perceived interactivity, perceived pleasure, and sickness were set. Besides, this study strived to compare and analyze Korean and Chinese Data. The results of this study were as follows. First of all, Korean users significantly affected spatial presence, perceived pleasure, and immersion. Spatial presence and perceived pleasure had also mediated effects on continuous usage intention through immersion. However, perceived interactivity and sickness did not affect immersion and even no mediating effect to continuous usage intention. In the case of Chinese users, spatial presence, perceived interactivity, and perceived pleasure were grouped into one variable. This variable influenced immersion and also had mediated effect on continuous usage intention. However, sickness, like Korean users, did not affect the set path. This study had implications for analyzing user perspective using immersion, a significant variable in previous research. In addition, this study found similarities and characteristics through a comparative analysis between Korean and Chinese users indirectly.