• 산업기술연구
• /
• 제16권
• /
• pp.123-129
• /
• 1996

A method of calculating the natural frequency corresponding to the first mode of vibration of beams and tower structures with irregular cross-sections and with arbitrary boundary conditions was developed and reported by D. H. Kim in 1974. In order to obtain the natural frequency by the presented method, the first step to take is to obtain the deflection influence surfaces. In design and analysis of any structure, the first step to be taken is to obtain this deflection influence surfaces. Any method can be used for this purpose. Then using this surfaces, deflections, slopes, moments, shears, and natural frequencies can be obtained by differentiating either the continuous function or discrete function defined at certain points. The merit of the presented method is that the natural frequency can be obtained by the deflection influence surfaces obtaining which is the first step in structural analysis.

• Steel and Composite Structures
• /
• 제31권2호
• /
• pp.159-172
• /
• 2019

Strengthening of civil infrastructure with advanced composites have recently become one of the most popular methods. The use of Fiber Reinforced Polymer (FRP) strips plates and fabric for strengthening of reinforced concrete structures has well established design guidelines and standards. Research on the application of FRP composites to steel structures compared to concrete structures is limited, especially for shear strengthening applications. Whereas, there is a need for cost-effective system that could be used to strengthen steel high-way bridge girders to cope with losses due to corrosion in addition to continuous demands for increasing traffic loads. In this study, a parametric finite element study is performed to investigate the effect of applying thick CFRP strips diagonally on webs of plate girders on the shear strength of end-web panels. The study focuses on illustrating the effect of several geometric parameters on nominal shear strength. Hence, a formula is developed to determine the enhancement of shear strength gained upon the application of CFRP strips.

• 한국강구조학회 논문집
• /
• 제19권2호
• /
• pp.233-245
• /
• 2007

AASHTO Standard의 하중분배계수식은 지간과 주형간격이 클수록 안전측으로 나타나지만, 지간과 주형간격이 작으면 비안전측임을 기존의 유한요소 연구에서 밝혀졌다. AASHTO LRFD는 주형간격, 지간, 바닥판 두께, 그리고 종방향 강성에 따른 분배계수식을 규정하고는 있으나, 이 식은 초기에 알려지지 않은 종방향 강성 때문에 정확한 하중분배계수 값을 결정하기 위해서는 반복절차가 요구되어진다. 따라서 본 연구에서는 2경간 연속 I-형교의 내측 및 외측주형에 대하여 반복설계 과정을 필요로 하지 않는 하중분배계수 간략식을 제안한다. 주형간격, 주형길이, 바닥판 두께, 바닥판 폭, 그리고 브레이싱의 간격 및 크기의 영향을 조사하기 위하여 유한요소법을 사용하였다. GTSTRUDL을 사용하여 교량 상부구조를 편심 보모델로 이상화 하였으며, 바닥판은 쉘요소, 거더는 보요소, 그리고 이 요소들의 합성거동을 위하여 강절링크로 연결하였다. 이 해석으로부터 얻은 분배계수를 AASHTO Standard와 LRFD 방법과 비교하였으며, 다른 매개변수들에 비해 거더간격, 지간, 그리고 바닥판 두께는 분배계수에 미치는 영향이 크게 나타났다. 내측주형에서 LRFD의 분배계수는 대부분의 경우에 안전측으로 나타났지만, 외측주형에서는 지간이 길 경우 비안전측으로 나타났다. 또한, 회귀분석을 수행하여 하중분배계수 간략식을 개발하였으며, 이 식에 의한 하중분배계수는 유한요소결과 보다는 항상 안전측이면서, AASHTO LRFD 보다는 일반적으로 작게 나타났다. 제안된 간략식은 2경간 연속 I-형교에 대한 실제 하중분배계수 산정에서 교량설계자들에게 도움을 줄 것이다.

• Steel and Composite Structures
• /
• 제23권5호
• /
• pp.597-610
• /
• 2017

This paper presents a mathematical model for fixed-end moments of I-sections with straight haunches for the general case (symmetrical and/or non-symmetrical) subjected to a concentrated load localized anywhere on beam taking into account the bending deformations and shear, which is the novelty of this research. The properties of the cross section of the beam vary along its axis "x", i.e., the flange width "b", the flange thickness "t", the web thickness "e" are constant and the height "d" varies along of the beam, this variation is linear type. The compatibility equations and equilibrium are used to solve such problems, and the deformations anywhere of beam are found by the virtual work principle through exact integrations using the software "Derive" to obtain some results. The traditional model takes into account only bending deformations, and others authors present tables considering the bending deformations and shear, but are restricted. A comparison between the traditional model and the proposed model is made to observe differences, and an example of structural analysis of a continuous highway bridge under live load is resolved. Besides the effectiveness and accuracy of the developed models, a significant advantage is that fixed-end moments are calculated for any cross section of the beam "I" using the mathematical formulas.

• Steel and Composite Structures
• /
• 제7권1호
• /
• pp.1-18
• /
• 2007

Additional cutouts in the floorbeam webs of orthotropic plated bridge decks relieve the highly stressed lower flange of the ribs passing through these floorbeam webs from possible fatigue damage. Conversely, the floorbeam webs themselves suffer from high stress concentrations, especially along the free edges of the additional cutouts. These stresses result from a combination of direct introduction of vertical traffic loads in the weakened web and from the truss action of the floorbeam. The latter differs from a simple beam action due to the presence of the openings and corresponds more to the behaviour of a Vierendeel truss. Close assessment of the appearing stresses, highly relevant for fatigue resistance, requires the use of elaborate finite element modelling. However, a full finite element analysis merely provides the results of total stresses, leaving the researcher or designer the difficult task of finding the origin of these stress components. This paper presents a calculation method for cutout stresses based on a combination of a framework analysis and a two dimensional finite element analysis of much smaller parts of the floorbeam. This method provides more insight in the origin of the stress components, as well as it simplifies any comparison of different additional cutout geometries, independent of the floorbeam topology.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.223-228
• /
• 2005

Precast concrete deck has many advantages comparing with the in-situ concrete deck, and has been successfully applied to replacement of the deteriorated decks and to the newly constructed highway bridges in domestic region. In order to apply the precast decks into the railway bridges, however, differences of the load characteristics between the highway and the railway should be properly taken into account including the train load, longitudinal force of the continuous welded rail. acceleration or braking force, temperature change and shrinkage. Proper level of the longitudinal prestress of the tendons that can ensure integrity of the transverse joints in the deck system is of a primary importance. To this aim, the longitudinal tensile stresses induced by the design loads are derived using three-dimensional finite element analyses, design codes and theoretical equations for the frequently adopted PSC composite girder railway bridge. The estimated proper prestress level to counteract those tensile stresses is over 2.4 MPa, which is similar to the case of the highway bridges.

• 대한토목학회논문집
• /
• 제26권3D호
• /
• pp.499-509
• /
• 2006

프리캐스트 콘크리트 바닥판은 일반적인 현장타설 바닥판과 비교할 때 많은 장점을 가지고 있으며, 최근 국내에서도 도로교의 노후 바닥판 교체 공사 및 신설 도로교에 성공적으로 적용되고 있다. 하지만, 철도교에 프리캐스트 바닥판을 적용하기 위해서는 활하중, 장대레일 종하중, 시제동하중, 온도변화, 건조수축 등 도로교와 철도교의 하중 특성의 차이를 적절히 반영한 설계가 요구되며, 특히 횡방향 이음부의 연속성을 확보하여 일체화시키기 위해 바닥판 내부에 배치한 종방향 텐던의 적정한 프리스트레스 수준을 평가하는 연구가 요망된다. 따라서 본 연구에서는 철도교에 빈번히 적용되는 PSC 합성거더 철도교에 대하여 정밀한 3차원 유한요소해석을 통해 주요 설계하중이 유발하는 바닥판의 종방향 응력을 산정하였다. 그 결과 종방향 인장응력을 유발하는 지배적인 요인은 활하중보다는 바닥판의 온도 저하나 시동하중으로 나타났으며, 특히 온도의 영향은 설계기준상의 제안식 또는 이론식과도 비교해 가며 중점적으로 분석하였다. 종방향 인장응력을 상쇄하여 올바른 구조거동을 유도하기 위한 프리스트레스의 범위를 고찰한 결과, 대상 철도교에 대해 2.4 MPa 이상의 프리스트레스를 도입하는 것이 적정한 것으로 나타났으며 이는 도로교의 경우와 유사한 수준으로 평가되었다.