• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1989년도 춘계학술대회 논문집
• /
• pp.74-76
• /
• 1989

x Pb($Sb_{1/2}Sn_{1/2}O_3-PbTiO_3-PbZrO_30.05{\leq}x{\leq}0.25$) ternary compound ceramics were fabricated by the mixed oxide method. The sintering temperature and time were 1200-1270[$^{\circ}C$], 2 hour, respectively. Increasing the PSS contents, the transition temperatures were decreased. The relative dielectric constant and Curie temperature of the 0.25 PSS-0.25 PT-0.5 PZ specimens were 450, 220[$^{\circ}C$]. The Pyroelectric coefficient of the 0.25PSS-0.25PT-0.50 PZ specimen was $5.20{\times}10^4$[C$\textrm{cm}^2$K].

• 한국전기전자재료학회논문지
• /
• 제11권9호
• /
• pp.711-717
• /
• 1998

BST(70/30) and BST(50/50) thin films were prepared by Sol-Gel method and studied about the microstructural and dielectric properties with Pt and ITO bottom electrodes. The stock solution was synthesized and spin coated on the Pt/Ti$SiO_2$/Si and Indium Tin Oxide(ITO)/ glass substrate. the coated films were dries at 350$^{\circ}C$ for 10 minutes and annealed at $750^{\circ}C$ for 1 hour for the crystallization. The thin films coated on ITO substrate were crystallized easily and the packing density and roughness of surface were better that those of films coated on Pt substrates. In the BST(50/50) composition the structural properties were similar to the BST(70/30) composition and grain size were decreased with increasing the contents of Sr. The dielectric constant was higher in the BST(50/50) composition compared with the BST(70/30) composition. Using the ITO substrate, the dielectric constant was higher than the Pt substrate while the dielectric loss was showed a reverse trend. The dielectric constant with and increase of temperature was decreased slowly.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.42.2-42.2
• /
• 2011

$TiO_2$ films were modified by adding a glass frit as a light scattering particle and applied to an anode electrode in dye-sensitized solar cells (DSSCs) to enhance the adhesion between $TiO_2$ and fluorine doped transparent oxide (FTO). Low melting point glass frits at contents of (3 to 7wt%) were added to the nano crystalline $TiO_2$ films. The light scattering properties, photovoltaic properties and microstructures of the photo electrodes were examined to determine the role of the low glass transition temperature ($T_g$) glass frit. Electrochemical impedance spectroscopy, Brunauer-Emmett-Teller method and scratch test were conducted to support the results. The DSSC with the $TiO_2$ film containing 3wt% low Tg glass frit showed optimal performance (5.1%, energy conversion efficiency) compared to the $TiO_2$-based one. The photocurrent density slightly decreased by adding 3wt% of the frit due to its large size and non conductivity. However, the decrease of current density followed by the decrease of electron transfer due to the large frit in $TiO_2$ electrode was compensated by the scattering effect, high surface area and reduced the electron transfer impedance at the electrolyte-dye-$TiO_2$ interface. The stability of the photo electrodes was improved by the frit, which chemically promoted the sintering of $TiO_2$ at relatively low temperature ($450^{\circ}C$).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.1634-1636
• /
• 2000

The mechanical and electrical properties of the hot-pressed and annealed $\beta$-SiC-$TiB_2$ electroconductive ceramic composites were investigated as function of the liquid forming additives of $Al_{2}O_{3}+Y_{2}O_3$ and the annealing method. Phase analysis of composites by XRD revealed $\alpha$-SiC(6H), $TiB_2$, and YAG($Al_{5}Y_{3}O_{12}$). In pressureless annealing method, the relative density and the mechanical properties of composites were increased with increasing $Al_{2}O_{3}+Y_{2}O_3$ contents because YAG of reaction between $Al_{2}O_3$ and $Y_{2}O_3$ was increased. But In pressured annealing method, reaction between $Al_{2}O_3$ and $Y_{2}O_3$ formed YAG but the relative density decreased with increasing $Al_{2}O_{3}+Y_{2}O_3$ contents. The electrical resistivity of the composites was all positive temperature coefficient resistance (PTCR) in the temperature range of 25$^{\circ}C$ to 700$^{\circ}C$.

• 한국표면공학회지
• /
• 제41권5호
• /
• pp.240-244
• /
• 2008

Composite plating is a method of co-deposition of plating layer with metallic and/or non-metallic particles to improve the plating layer properties such as high corrosion resistance and photolysis of organic compounds. The properties of nickel-ceramic composite plating are significantly depend on the surface characteristics of co-deposited particles as well as the quantity in electrolyte. In this study, Ni-$TiO_2$ composite coating layer was produced by electrodeposition technique from non-aqueous eletrolyte and its surface characteristics as well as photolytic properties were investigated. The amounts of immobilized $TiO_2$ particles increased with increasing the initial $TiO_2$ particles contents in the bath. Samples electroplated with the current density of $0.5\;A/dm^2$ showed the significantly improved homogeneous $TiO_2$ particles distribution. The corrosion resistance of Ni-$TiO_2$ composite coating layer also improved with increaing the amounts of $TiO_2$ particles. Etched sample showed about 10% increased photolytic rate of organic matter compare to that of the non-etched.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 C
• /
• pp.1254-1256
• /
• 1994

0.15$(Ba_{0.95}Sr_{0.05})$O-0.15$(Sm_{2(1-x)}Nd-{2x})O_3-0.7TiO_2 (x=0{\sim}10[m/o])$ ceramics were fabricated by mixed-oxide method. Microwave dielectric properties was investigated with the contents of $Nd_2O_3$. Increasing the contents of $Nd_2O_3$ from 0 to 6[m/o], sintered density was increased 5.53 to $5.68[g/ cm^3]$. In the specimen with contents of $Nd_2O_3$(6[m/o]), dielectric content was maximum value of 78.14 and decreased with increasing the contents of $Nd_2O_3$. Quality factor was increased with the contents of $Nd_2O_3$.

• 한국분말재료학회지
• /
• 제11권6호
• /
• pp.503-509
• /
• 2004

Dispersion stabilities and photocatalytic activities of rutile $TiO_{2}$ powders with unique nano-structure synthesized by homogeneous precipitation process at low temperature(HPPLT) have been investigated in the acrylic resin containing fluorostyrene in the range of 0~0.16 mole. Isoelectric point of $TiO_{2}$ in the acrylic resin placed in the neutral region whereas that of $TiO_{2}$ in the water placed in the acidic region, indicating that zeta potential and agglomeration of $TiO_{2}$ powder is strongly dependent on the pH and the type of solvent. To prepare an adhesion, an acrylic resin containing fluorostyrene was synthesized by a radical polymerization. The adhesion of coating layer was increased with increasing fluorostyrene's contents without changing the dispersion stabilities and degrading photocatalytic properties.

• 한국결정성장학회지
• /
• 제8권1호
• /
• pp.42-48
• /
• 1998

PLT($Pb_{1-x}La_{2x/3}TiO_3$, x=0.1~0.3) 분말의 합성을 수열법에 의해 행하였다. 최적의 PLT분말을 얻을 수 있는 합성조건은 반응온도; $250^{\circ}C$, 수열용매; 8M-KOH, 반응시간; 12시간이었으며, $Pb_{1-x}La_{2x/3}TiO_3$의 조성이 $x{\leq}0.2$일 때 단일상의 PLT가 얻어졌다. 수열적으로 얻어진 PLT분말에 있어서 tetragonality(c/a)와 상전이 온도는 고용된 La2O3 함량의 증가에 따라 감소하였으며, $Pb_{1-x}La_{2x/3}TiO_3$(x=0.2)의 Curie 온도는 약 $400^{\circ}C$이었다. 합성분말의 형태는 구상에 가깝고, 입자의 크기는 20~200mm 범위였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.208-209
• /
• 2006

Sinterability and microwave dielectric properties of the $Zr1-x(Zn_{1/3}Nb_{2/3})xTiO_4$(x=4, 6) system ceramics have been investigated as functions of zinc-borosilicate(ZBS) glass contents and amount of $Zn_{1/3}Nb_{2/3}O_2$ substitution with a view to applying the composition to LTCC technology. The addition of 25 wt% ZBS glass ensured successful sintering below $925^{\circ}C$. With increasing ZBS glass and $Zn_{1/3}Nb_{2/3}O_2$ contents increased dielectric constant and sinterability but addition ZBS glass decreased the quality factor significantly due to the formation of an excessive liquid and second phases. The sintered $Zr4(Zn_{1/3}Nb_{2/3})6TiO_4$ system ceramics at $925^{\circ}C$ with 25 wt% ZBS glass demonstrated 27.7 in dielectric constant (${\varepsilon}_r$), 3,850 m quality factor($Q{\times}f_0$), and +6 ppm/$^{\circ}C$ in temperature coefficient of resonant frequency($\tau_f$).

• 한국광학회지
• /
• 제17권3호
• /
• pp.296-302
• /
• 2006

졸-겔법으로 촉매농도에 따라 저온 $TiO_2$ 졸을 제조한 후, 침지코팅법을 이용하여 $TiO_2$ 박막을 제작하였다. 제작된 저온 $TiO_2$ 박막의 광학적, 구조적, 광활성 특성을 조사하였다. 0.10 mol, 0.25 mol, 0.50 mol과 0.75 mol의 촉매농도로 제작된 저온 $TiO_2$ 박막은 가시광 영역에서 높은 투과율 특성을 나타내었다. XRD 스펙트럼 결과에 의하면 촉매농도가 증가함에 따라 아나타제 결정구조에서 루타일 결정구조로의 상전이가 촉진되고 결정크기는 촉매농도가 증가함에 따라 아나타제 결정크기가 감소하였다. SEM 결과로부터 $TiO_2$ 박막의 표면입자크기가 0.25 mol의 측매농도에서 가장 작았다. 아나타제 결정구조를 가지는 0.10 mol, 0.25 mol과 0.50 mol의 $TiO_2$ 박막 존재 하에서 메틸렌블루가 완전히 광분해 되는 것을 확인하였다.