Journal of Surface Science and Engineering (한국표면공학회지)

The Korean Institute of Surface Engineering (한국표면공학회)
권호 표지
DOI QR코드

DOI QR Code

Surface and Photolytic Characteristics of Ni-TiO2 Composite Layer Electro-Plated from Non-Aqueous Electrolyte

비수용액 전해질에서 전기도금한 니켈-TiO2 복합 도금층의 표면 및 광분해 특성 연구

  • Jo, Il-Guk (School of Materials Science and Engineering, Pusan National University) ;
  • Ji, Chang-Wook (School of Materials Science and Engineering, Pusan National University) ;
  • Choi, Chul-Young (Division for Dongnam Area Technology Service, Korea Institude of Industrial Techology) ;
  • Kim, Young-Seok (Division for Dongnam Area Technology Service, Korea Institude of Industrial Techology) ;
  • Kim, Yang-Do (School of Materials Science and Engineering, Pusan National University)
  • 조일국 (부산대학교 재료공학부) ;
  • 지창욱 (부산대학교 재료공학부) ;
  • 최철영 (한국생산기술연구원 동남권기술지원본부 수송기계부품지원센터) ;
  • 김영석 (한국생산기술연구원 동남권기술지원본부 수송기계부품지원센터) ;
  • 김양도 (부산대학교 재료공학부)
  • Published : 2008.10.31
Download PDF
⟨ Previous Next ⟩

Abstract

Composite plating is a method of co-deposition of plating layer with metallic and/or non-metallic particles to improve the plating layer properties such as high corrosion resistance and photolysis of organic compounds. The properties of nickel-ceramic composite plating are significantly depend on the surface characteristics of co-deposited particles as well as the quantity in electrolyte. In this study, Ni-$TiO_2$ composite coating layer was produced by electrodeposition technique from non-aqueous eletrolyte and its surface characteristics as well as photolytic properties were investigated. The amounts of immobilized $TiO_2$ particles increased with increasing the initial $TiO_2$ particles contents in the bath. Samples electroplated with the current density of $0.5\;A/dm^2$ showed the significantly improved homogeneous $TiO_2$ particles distribution. The corrosion resistance of Ni-$TiO_2$ composite coating layer also improved with increaing the amounts of $TiO_2$ particles. Etched sample showed about 10% increased photolytic rate of organic matter compare to that of the non-etched.

Keywords

References

  1. Chun, H. D., J. KSEE, 16(7) (1994) 809-818
  2. J. J. Shah, H. B. Singh, Environ. Sci. Technol., 22 (1988) 1381 https://doi.org/10.1021/es00177a001
  3. 안복엽, 석상일, 서태수, 이동석, 김종부, 대한환경공학회지, 23(7) (2001) 1205-1210
  4. A. Roberto, C. Vincenzo, I. Amedeo, and M. Raffaele, , 53 (1999) 51 https://doi.org/10.1023/A:1019005922456
  5. A. L. Teel, C. R. Warberg, D. A. Atkinson, and R. J. Watts, Water Res., 35, (2001) 977 https://doi.org/10.1016/S0043-1354(00)00332-8
  6. Lee, S. W. and Lee, K. S., J. Ind. Eng. Chem., 10(3) (2004) 492-498
  7. G. Szekely, J. Electrochem. Soc. 98 (1951) 318 https://doi.org/10.1149/1.2778214
  8. D. E. Couch, A. Brenners, J. Electrochem. Soc. 99 (1952) 234 https://doi.org/10.1149/1.2779711
  9. R. S. Sarabi, V. B. Singh, Met, Finish. 96 (1998) 26
  10. L. Legrand, M. Heintz, A. Trachant, R. Messina, Electrochem. Acta 40 (1995) 1711 https://doi.org/10.1016/0013-4686(95)00019-B

Cited by

  1. Photolytic Characteristics of TiO2 Treated by Atmospheric Pressure Dielectric Barrier Discharge vol.26, pp.8, 2016, https://doi.org/10.3740/MRSK.2016.26.8.406