• Korean Journal of Plant Resources
• /
• v.33 no.2
• /
• pp.73-79
• /
• 2020

This study was conducted to evaluate the appropriateness cultivation of R. glutinosa by plug seedling. Cultivation by direct seeding (DS) and plug seedling (PS) of R. glutinosa was conducted in each of the Pyeongchang and Eumseong areas. As a result, locally, for the Eumseong area, aerial parts in leaf length, leaf width and number of leaves per plant were better than for the Pyeongchang area. In the cultivation method, leaf width and number of leaves per plant were better with PS cultivation than with DS cultivation. Locally, rhizome yield of underground parts in the Eumseong area was better than that in the Pyeongchang area, but the rhizome yield with DS cultivation in the Eumseong area and PS cultivation in the Pyeongchang area were statistically the same. The fresh rhizome yield for DS in Eumseong, PS in Eumseong, DS in Pyeongchang and PS in Pyeongchang was 1,253 kg/10a, 1,376 kg/10a, 923 kg/10a and 1,256 kg/10a, respectively. Finally, the catalpol content for DS in Eumseong, PS in Eumseong, DS in Pyeongchang and PS in Pyeongchang was 3.67%, 2.03%, 2.96% and 1.60%, respectively. From these results, it can be seen that the R. glutinosa PS cultivation method can increase the rhizome yield.

• The Journal of Korean Academy of Prosthodontics
• /
• v.19 no.1
• /
• pp.17-27
• /
• 1981

This study was conducted to determine the chemical composition and the mechanical properties of four commercially available low gold-based crown and bridge alloy produced in Korea. Four dental casting gold-silver-palladium alloys, i.e., A, B, C and D (code of alloys) were selected for the evaluation of chemical composition, ultimate tensile strength, elongation. values and Vickers hardness. The chemical composition of test specimens was analyzed by both emission spectrography and wet gravitation method with a 1.5gm of low gold ingot. The tensile properties and Vickers hardness was determined with cast specimens treated in following three conditions; as-cast, softening heat treatment and hardening heat treatment. The tensile testing bars were cast in accordance with the model designed by Gettleman and Harrison (1969) which was modified from the A. D. A. Specification No. 14 for dental chromium-cobalt casting alloy. Nine tensile test specimens were made from a split silicone mold for each of the test alloys to the size of 2.5mm in diameter and a gauge length of 10mm. All four alloys were handled in accordance with conventional methods used in Type III gold alloys. Ultimate tensile strength and elongation were measured on an Instron Universal Tensile Testing Machine (Model 1125, Japan) operated at a crosshead rate of 0.1cm/min. Elongation values were measured using Digital Measuring Microscope (MS-152, FUSOH, Japan). Vickers hardness was determined with a Vickers Hardness Tester (Model VKH-l, Japan) at a 1.0kg load on a mounted tensile test specimen. The following results were obtained from this study; 1. All tested alloys were composed of Au, Ag, Pd, Cu, Zn and Fe in common. The composition rate of gold for all four alloys was found in the range of $42{\sim}47$ weight % as shown below. Alloy A; Au 45%, Ag 40.2%, Pd 5.76%, others 9.04%. Alloy B; Au 47.1%, Ag 29.03%, Pd 6.98%, others 16.92%. Alloy C; Au 45%, .Ag 26.9%, Pd 6.83%, others 21.07%. Alloy D; Au 41.8%, Ag 34.4%, Pd 6.95%, others 16.85%. 3. The ultimate tensile strength of the four alloys was in the range of $31{\sim}82kg/mm^2$. The test results were shown in the below order from the highest value; As-cast condition; D, B, C, A. Softening heat treament; B, C, D, A. Hardening heat treatment; D, B, C, A. 4. The test :results of the elongation rate for each alloy were in the range of $0.5{\sim}18%$. The test results were shown in the below order from the highest value; As-cast condition; A, D, B, C. Softening heat treatment; A, C, D, B. Hardening heat treatment; C, D, B, A. 5. Vickers hardness for each of the four alloys was in the range of $120{\sim}230$. The test results were shown in the below order from the highest value; As-cast condition; C, B, D, A Softening heat treatment; D, B, C, A. Hardening heat treatment; D, A, C, B. 6. There were no differences in the physical properties between as-cast condition and softening heat treatment.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.3
• /
• pp.396-400
• /
• 2009

Dodok (Codonopsis lanceolata Bench. et Hook) root contains abundant pharmaceutical substances and is widely used as a food and a medicinal herb. To identify the major components, fermented Codonopsis lanceolata was analyzed for its chemical compositions prior to their pharmaceutical substances, which were used as the fundamental data. The contents of carbohydrate, crude protein, crude lipid and ash are 79.3%, 13.0%, 2.40% and 5.3%, respectively. The calories of fermented Codonopsis lanceolata was 390.5 kcal. Total dietary fiber was 47.4% of total carbohydrates. The protein was composed of 18 different amino acids. The contents of essential and non-essential amino acids were 8,118.18 mg and 10,913.42 mg. The K was the largest mineral followed by P, Ca and Mg, which means fermented Codonopsis lanceolata is alkali material. The contents of saturated fatty acids, monounsaturated fatty acids and polyunsaturated fatty acids were 37.76%, 3.84%, and 35.64%, respectively. Therefore, the amount of the total unsaturated fatty acid was higher than that of any other plant. The content of crude saponin in fermented Codonopsis lanceolata was 60.1 mg/g. It is expected that a follow up study on fermented Codonopsis lanceolata through development and evaluation of processed foods for their functional properties would provide useful information as a source of medicinal foods.

• Journal of Korean Society of Forest Science
• /
• v.108 no.4
• /
• pp.610-617
• /
• 2019

The effects of dippin treatments using Glycyrrhiza uralensis extract (0.5%, 1.0%, 2.0%) and calcium chloride (0.5%, 1.0%, 2.0%) on the quality of peeled chestnuts were investigated. Following dipping treatment, peeled chestnuts were vacuum-packed using a 75-㎛ polyethylene PE and nylon film, and stored in a 0 ℃ incubator for six weeks. The dipping treatments of the peeled chestnuts successfully achieved browning inhibition. The browning degree following 2.0% calcium chloride treatment was the lowest at 0.68 OD. The color change (ΔE) of the peeled chestnuts was the highest (6.0) in the control, and the lowest (3.5) for the 1.0% and 2.0% calcium chloride-treated samples. G. uralensis extract and calcium chloride treatments did not impact weight, moisture loss rate, firmness, or the soluble solid content of the peeled chestnuts following storage. The decay rate was 12.0% in the control group, and 11.0%, 11.5%, and 11.0% for G. uralensis treatment at 0.5%, 1.0%, and 2.0% calcium chloride treatment, respectively, and 13.0%, 9.5%, and 9.0% at 0.5%, 1.0%, and 2.0% calcium chloride treatment, respectively. Sensory evaluation (palatability, off-odor) showed that a 2.0% G. uralensis extract treatment presented excellent results during the storage period. Texture and color indicated no differences as a result of the browning inhibition treatments. Therefore, when considered comprehensively, a 2.0% G. uralensis extract treatment was shown to be effective for maintaining the quality and providing browning inhibition of peeled chestnuts. This result isexpected to solve the problem of quality deterioration in the form of sour taste, which is a problem in chemical processing.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.12
• /
• pp.1843-1851
• /
• 2014

This study evaluated the quality characteristics and antioxidant activities of barley Doenjang (soybean paste) containing various contents (4, 12, and 20%) of kelp extracts. After 60 days of fermentation, pH, acidity, and viscosity of Doenjang were 5.80~6.86, 0.57~1.87%, and 4,913.3~9,333.3 cps, respectively, showing significant differences according to content of kelp extracts. Amino-type nitrogen contents was 902.60~921.90 mg%. For color values, L and b values increased significantly (P<0.001), whereas a value decreased slightly according to kelp extracts. DPPH radical scavenging effect ($IC_{50}$) for butylated hydroxyanisole ranged from 10.28 mg/mL to 23.23 mg/mL. DPPH radical scavenging effects of control was highest among the samples. The total polyphenol and flavonoid contents were 12.72~6.37 mg tannic acid equivalence/g, and $0.98{\sim}1.56{\mu}g$ rutin equivalence/g, respectively. Initial counts of total bacteria and lactic acid bacteria were 7.20~7.57 log CFU/g, and 4.20~4.71 log CFU/g respectively, showing significant difference according treatment and fermentation (P<0.05). In the sensory evaluation, 20% kelp extract Doenjang (5.6) showed higher overall acceptability than other samples (6.5) (P<0.01). Especially, umami taste (6.1) and texture (6.4) of 20% kelp extract Doenjang were higher than those of control (P<0.05). These results suggest that Doenjang containing kelp extracts, will be good for industrial fields.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.8
• /
• pp.1197-1206
• /
• 2014

This study compared and analyzed the physiochemical and quality characteristics of young radish kimchi made with YR-FNC or YR-GC cultivated by organic farming as well as kimchi made with young radish cultivated by chemical composting/general farming (YR-Control). YR-Control showed higher contents of water and crude protein than YR-FNC and YR-GC kimchi but lower contents of crude ash, dietary fiber, and vitamin C. YR-FNC and YR-GC kimchi also showed higher contents of P and Cu than YR-Control but lower contents of N, K, Ca, Mg, Fe, and Zn. YR-Control fermentation progressed faster than that of YR-FNC or YR-GC after 24 days, and YR-Control more rapidly reached an appropriate pH. On the other hand, YR-FNC and YR-GC kimchi fermentation progressed slow and did not reach a pH level below 5.3. For period of fermentation, YR-Control and YR-FNC kimchi showed no significant difference in reducing sugar content, whereas that of YR-GC kimchi decreased significantly after 24 days of fermentation (P<0.002). YR-FNC and YR-GC kimchi showed 1.5~3 times higher total polyphenol and flavonoid contents than YR-Control at the beginning of fermentation, whereas YR-Control and YR-FNC kimchi showed a significant increase in total polyphenol and flavonoid contents during the fermentation period. By day 7 of fermentation, YR-FNC kimchi showed higher contents of lactic acid bacteria and total microbes than YR-Control. In the sensory evaluation, YR-FNC and YR-GC kimchi showed higher preference values than YR-Control. Therefore, kimchi made from young radish cultivated by organic farming has a longer freshness period than control kimchi and is characterized by excellent sensory quality, increased physiological contents, and improved beneficial health effects.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.8
• /
• pp.1270-1277
• /
• 2014

This study investigated the quality characteristics of instant rice noodles manufactured with broken rice flour as an application of rice-processed products. We examined the physicochemical characteristics of common rice flour (CRF), broken rice flour (BRF), and CRF mixed with BRF (CBRF). Futhermore, instant rice noodles were manufactured with these three types of rice flour, and their quality and sensory characteristics were also investigated. Damaged starch content and water-binding capacity of rice flour were highest in BRF. Particle size of rice flour was significantly different among the three types. RVA pasting viscosities of BRF and CBRF were higher than that of CRF. Volume after cooking of instant rice noodles increased in rice noodles made with broken rice flour (BRN). Turbidity and cooking loss of BRN were higher than those of common rice noodles (CON). For texture properties, CON displayed the highest hardness, adhesiveness, and chewiness. In the sensory evaluation, springiness and overall acceptability values of CON were significantly higher than those of other rice noodle types (BRN and CBRN). In conclusion, BRN showed increased cooking loss and turbidity with reduced texture and overall acceptability values. The results of this study suggest that added amount of CRF may significantly increase the overall quality of instant rice noodles prepared with BRF.

• Culinary science and hospitality research
• /
• v.20 no.3
• /
• pp.201-213
• /
• 2014

This study showed the quality characteristics of chicken breast meat(CB) and leg meat(CL) with various kinds of existing cooking methods and double layer pan filled with Phase Change Materials(PCM) heating. Steaming resulted the highest moisture contents of 63.9% and 62.1% each in CB and CL. Also, steaming showed the lowest with 1.3% and 8.6% of crude fat in CB and CL(p<0.05) respectively. Crude protein content of CB in charcoal heating and grilling of CL had the highest values of 37.9% and 30.5% each. In the test of crude ash, grilling showed the highest with 2.4% in CB(p<0.05) and oven heating and charcoal heating was the highest with 1.3% in CL(p<0.05). In the test of cooking loss, charcoal heating showed much higher with 33.52% and 41.16% in CB and CL each than the other cooking treatments. And in case of shear force test, $5.93kg/cm^2$ in CB and $6.80kg/cm^2$ in CL were the highest scores in grilling. In the test of color, L value of CB prepared by steaming showed the highest scores of 78.31(p<0.05) while CL by oven heating was the highest of 10.00 in a value. In the overall acceptability test of 9 point-scale sensory evaluation, CB prepared by charcoal heating showed the highest score of 7.25 points in boiling, but the lowest score of 6.00 points in steaming(p<0.05). CL by charcoal heating resulted the highest score of 7.71 points but had no significant difference.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.2
• /
• pp.223-230
• /
• 2008

For the use of extracts from salmon frame as a basic material of Gomtang-like products, various methods (soaking into soybean milk, adding anchovy, and adding spices) for masking fish odor into extracts from salmon frame were examined and the food component characteristics were also compared with commercial Gomtang. According to the results of volatile basic nitrogen, transmission at 660 nm and sensory evaluation of extracts, soaking treatment, which is the soaking of salmon frame into soybean milk, was the most efficient method among the various methods for masking fish odor into extracts from salmon frame. There was no difference in the proximate composition between extracts from salmon frame soaked (FS) and unsoaked (C) into soybean milk. The FS was not detected in heavy metals, such as chromium, lead and cadmium. The taste value of FS (16.26) was higher than that of C and the major amino acids were glutamic acid and aspartic acid. Total amino acid content of FS (3.08 g/100 mL) was also higher than those of C (2.95 g/100 mL) and commercial Gomtang (1.70 g/100 mL), and the major amino acids were glycine, proline, glutamic acid and arginine. The calcium and phosphorus contents of FS/500 mL accounted for 21.7% and 18.5%, respectively, of the recommended daily allowance of mineral for adult.

• Journal of Korean Home Economics Education Association
• /
• v.18 no.3 s.41
• /
• pp.81-95
• /
• 2006

The purpose of this study was to evaluate appropriateness of clothing & textiles as educational contents in practical arts or technology home economics in the 7th curriculum. The factors of appropriateness were the amounts of learning, the degrees of understanding, interest and requirement on the educational content recognized by elementary, middle and high school students. The data collected from evaluation sheets were analyzed by frequency analysis, t-test, crossing analysis using SPSSWIN 12.0 program. Results were as follows; First. more than 50% of elementary, middle and high school students were recognized the amounts of tearing of clothing & textiles proper. But boy students of middle school recognized 'making clothes' in practice course too heavy. Second. It were from easy to difficult that the degrees of understanding on the educational contents of clothing & textiles recognized by elementary school students. Elementary school students understood both 'making cushion' and 'sewing machine theory and practice' difficult. Middle school students understood 'basic sewing for repairing clothes' and 'making clothes' difficult whereas high school students thought 'making pillow' and 'making bag' difficult. All students understood practice courses hard. Third, the degrees of interest showed from 'interest' level to 'not interest' level in case of elementary school students whereas 'interest' level in middle school students and 'common' in high school students. Fourth, the requirements of elementary, middle and high school students were in 'necessary' level to 'common' level. Editional contents such as 'learning sewing machine', 'making cushions'. 'making clothes', and 'making pillow-cover and bag' were low in the degrees of requirement. The correlationship between the amount of learning and the each level of understand, interest and requirement of students was indirect. On the other hand, Among the level of understand, interest and requirement were direct in case of high school students.