• Journal of Energy Engineering
• /
• v.13 no.2
• /
• pp.93-100
• /
• 2004

The smear media possible to sampling and radiation detection was prepared and evaluated for the surface contamination using indirect method. The films were made by impregnating Cerium Activated Yttrium Silicate (CAYS) in a polysulfone membrane. The membranes used solution as a dimethylformamide (DMF) and methylene chloride (MC), polysulfone as a polymer matrix and CAYS as a inorganic scintillator. The proximity membranes were prepared with single- and double-layered structure. The solidified methods were immersion to the nonsolvent bath such at water and ethanol and solvent evaporation. The measurement of the photon produced by interaction with radiation and inorganic scintillator used a photomultiflier tube (PMT), amplifier, and counter. In the comparison with the low background alpha/beta counter, the counter rate using inorganic scintillator proximity membrane for the $\^$14/C surface contamination was about 50%. Also. the $^3$H counting results revealed that the prepared membranes were efficient to monitor the surface contaminated with the low energy be-ray emitter nuclides.

• Korean Journal of Environmental Agriculture
• /
• v.17 no.4
• /
• pp.371-378
• /
• 1998

Pesticide has played important role in Korean and Austrailian agriculture. In addition, pesticides are the most reliable tools pests in agriculture. Recently, it is highly recommended that the use of pesticide should be concerned with both atricultural and environmental aspect, also legislation on environmental contamination has been fortified to the world. Particularly, the attention on agrochemicals has been focused on the soil abuse and the water contamination at present time. In spite of this kind of concern, a few research about pesticides using in Australia and Korean have been conducted to their behaviors under australian and korean environment to avoid environmental contamination by pesticides. Thus, the research organizations need facilities to analyze the characteristics of each pesticide and the environmental fate of pesticides. The conventional analytical method to detect pesticides and their metabolites can not be overcome to reduce time, expenditure, and complexity of analysis even though the methods are accurate and precise. For example, High performance liquid chromatography(HPLC), and gas chromatography (GC) used until now are less choice detectors and often lower sensitive. In contrast to the conventional analytical methods, biosensors are so fast in analysis and has high productivity and analyze multi=sample simultaneously. Therefore, it is biosensing analytical method that we could consider as an alternative method intead of the conventional methods.

• Particle and aerosol research
• /
• v.9 no.3
• /
• pp.149-161
• /
• 2013

Experiments on photochemical reactions of purified air alone in an indoor smog chamber were carried out after flushing Teflon bags with purified air for many hours in order to check the level of contamination on the chamber wall. Ozone concentrations were linearly increased from <4 ppb up to about 8 ppb with irradiation time for four hours. Outgassing of NOx from the chamber wall was found to be less than 1 ppb. New ultrafine particles were formed and grown up to about 70 nm during the photochemical reactions, and then total number and mass concentrations of particles were increased from <10 particles/$cm^3$ up to about 4,000 particles/$cm^3$ and $1.3{\mu}g/m^3$, respectively. The wall conditions of these Teflon bags flushed with purified air might not severly affect the chamber experimental results for photochemical reactions of polluted urban ambient air. The difference of gaseous species between two chambers was 2.4 ppb of ozone at most, indicating that the wall cleaning performance of two chambers was nearly similar.

• Korean Journal of Pharmacognosy
• /
• v.51 no.2
• /
• pp.146-150
• /
• 2020

Amomum Tsao-ko used as a traditional oriental herbal medicine, is indigenous to several Asia countries. This study was carried out to investigate the contamination by Benzo(a)pyrene in Amomum Tsao-ko Fruit of Medicinal Herbs. 20 samples of Amomum Tsao-ko Fruit were evaluated for the Benzo(a)pyrene contamination. They were analyzed for Benzo(a)pyrene using high-performance liquid chromatogrphy(HPLC)-fluorescence detection and the positive samples were confirmed using gas chromatography tandem mass spectrometry. The levels of Benzo(a)pyrene were from 9.2 to 95.5 ㎍/kg and the average was 40.6 ㎍/kg. There are no Benzo(a)pyrene standards for Amomum Tsao-ko Fruit of Medicinal Herbs. These data will be used as a basic data for the future legislation on the regulation and control of benzo(a)pyrene of Amomum Tsao-ko Fruit of Medicinal Herbs.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.8
• /
• pp.2797-2820
• /
• 2015

In order to accommodate huge number of antennas in a limited antenna size, a large scale antenna array is expected to have a three dimensional (3D) array structure. By using the Active Antenna Systems (AAS), the weights of the antenna elements arranged vertically could be configured adaptively. Then, a degree of freedom (DOF) in the vertical plane is provided for system design. So the three-dimension MIMO (3D MIMO) could be realized to solve the actual implementation problem of the massive MIMO. However, in 3D massive MIMO systems, the pilot contamination problem studied in 2D massive MIMO systems and the inter-cell interference as well as inter-vertical sector interference in 3D MIMO systems with vertical sectorization exist simultaneously, when the number of antenna is not large enough. This paper investigates the interference management towards the above challenges in 3D massive MIMO systems. Here, vertical sectorization based on vertical beamforming is included in the concerned systems. Firstly, a cooperative joint vertical beams adjustment and pilot assignment scheme is developed to improve the channel estimation precision of the uplink with pilots being reused across the vertical sectors. Secondly, a downlink interference coordination scheme by jointly controlling weight vectors and power of vertical beams is proposed, where the estimated channel state information is used in the optimization modelling, and the performance loss induced by pilot contamination could be compensated in some degree. Simulation results show that the proposed joint optimization algorithm with controllable vertical beams' weight vectors outperforms the method combining downtilts adjustment and power allocation.

• Korean Journal of Food Science and Technology
• /
• v.44 no.2
• /
• pp.247-250
• /
• 2012

Raw milk samples (n=28) obtained from milk tanks in 3 dairy plants of different regions and commercial milks (n=100) were collected from six cities. These samples were analyzed for the level of aflatoxin $M_1$ contamination using immunoaffinity columns and high performance liquid chromatography coupled with fluorescent detectors. Confirmation of aflatoxin $M_1$ ($AFM_1$) identified in positive samples was based on the formation of the hemiacetal derivative ($AFM_{2a}$) after derivatization with trifluroacetic acid. The average concentrations of aflatoxin $M_1$ in the raw milks were 25.1 ng/kg, and those values in commercial milks were 29.8 ng/kg. The highest level of aflatoxin $M_1$ in milk was 72.7 ng/kg. These results showed that the contamination of aflatoxin $M_1$ in milks consumed in the Korea was quite low compared to the standard in Korea Food Code (aflatoxin $M_1$ 500 ng/kg).

• Proceedings of the KIPE Conference
• /
• 2000.07a
• /
• pp.581-586
• /
• 2000

Gas metal arc welding(GMAW) uses a continuously fed electrode as a filler metal. The arc is shielded from atmospheric contamination by an inert gas active or inert/active gas mixture delivered through the welding gun and cable assembly. The recent research topics on $CO_2$ are welding machines are focused mainly on the reduction method of generated spatter by using new type consumable electrode metal or inverter control method. The various current waveform control methods have been researched for welding performance improvement. Until now current waveform control methods reduce to spatter occurred by instantaneous short circuiting,. but these methods is drawback that no reduce spatter occurred by arc reignition. In this paper the previous arc reignition current control method for welding performance improvement of inverter arc welding machine is studied and compared the various current control methods with the previous arc reignition current control method.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.6
• /
• pp.219-226
• /
• 2002

Filtration performance of an automotive fuel filter was evaluated based on the theory of Beta ratio. This study also introduced the fuel components' contamination performance test stand incorporating the multi-pass filtration test circuit. The theoretical basis of multi-pass test and test procedure were described in detail. The specification of commercial fuel filter currently available was just the maximum pressure drop across the filter assembly and the holding capacity of contaminants. However, test results revealed that the fuel filter tested could not maintain consistent Beta ratio, that is filtration efficiency, although it had the holding capacity close to the specification. Hence the Beta ratio should be specified in service life. The results also showed that filtration system model should be refined including desorption ratio to estimate the variable Beta ratio in the test.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.11a
• /
• pp.35-36
• /
• 2022

In order to supplement the flame-retardant performance of oil stain, which can prevent wooden buildings from contamination, (NH4)2HPO4, a phosphorus flame-retardant, was added to oil stain and applied for each type of plywood, and an experiment was conducted. The addition rate was set to 0-60%, but white powder appeared on the surface of plywood from 40% and thus it was impossible to experiment, so the maximum addition rate was selected as 30%. As a result of the experiment, acacia plywood had the best performance. As the rate of addition of the flame retardant increased, the remaining time and carbonization length of all plywood decreased, but the carbonization length of the MDF plywood was not met with the standards.

• Journal of Biomedical Engineering Research
• /
• v.10 no.3
• /
• pp.343-350
• /
• 1989

A new algorithm classifying ECG Arrhythmia signals using Back-propagation network is proposed. The base-line of ECG signal is detected by high pass filter and probability density function then input data are normalized for learning and classifying. In addition, ECG data are scanned to classify Arrhythmia signal which is hard to find R-wave. A two-layer perceptron with one hidden layer along with error back-propagation learning rule is utilized as an artificial neural network. The proposed algorithm shows outstanding performance under circumstances of amplitude variation, baseline wander and noise contamination.