• Journal of Food Hygiene and Safety
• /
• v.24 no.2
• /
• pp.169-173
• /
• 2009

A survey of total aflatoxin levels was conducted on 145 samples(carthamiflos, thujae semen, giycyrrhizae radix et rhizoma) collected in Yakyeang markets in Seoul. Aflatoxin levels were quantified by the immunoaffinity column clean-up method followed by performance liguid chromatography(HPLC)-fluorescence detector(FLD). Aflatoxins were found in 10(6.9%)samples including 5 Arecae semen, 4 Thujae semen, 1 Zizyphi semen with a range of $0.45{\sim}79.15\;{\mu}g/kg$. Generally These results show that the contamination level of aflatoxins in Herb Medicines consumed in Korea is high compared with the standard in Korea Herb Medicine Code($10\;{\mu}g/kg$ as aflatoxin B1). It is considered that aflatoxin concentration was increased in herb medicines during a storage and drying in herb medicines examined

• Analytical Science and Technology
• /
• v.30 no.5
• /
• pp.295-302
• /
• 2017

This study presents a method validation for extraction and quantitative analysis of levulinic acid in soy sacues using high performance liquid chromatograph-photodiode array detector (HPLC-PDA). The levulinic acid in samples were extracted with distilled water, and then purified with C18 Sep-Pak cartridge. The calibration curves showed good linearity (R > 0.999) in a relatively wide concentration range ($2.5-400{\mu}g/mL$). Mean recoveries and relative standard deviation (RSD) of levulinic acid spiked in soy sauce samples at different spiking levels ($2.5-400{\mu}g/mL$; 6 point). Recoveries were 87.58-97.26 % with RSD less than 15 %, and limit of detection (LOD) and limit of quantification (LOQ) were 0.64 and $1.64{\mu}g/mL$, respectively. According to monitoring result with the established method, levulinic acid was found in 43 of 59 domestic commercial soy sauces, soy sauce based sauces and seasoned meats. The contamination levels were 0.44-1.23 mg/mL for soy sauces, 0.03-0.83 mg/mL for soy sauce based sauces and 8.43-38.94 mg/mL for seasoned meats. The results indicated to be rapidly and accurately qualifying levulinic acid and can be used as a suitable quality control method for soy sauce and soy sauce related commodities.

• Clean Technology
• /
• v.24 no.3
• /
• pp.175-182
• /
• 2018

In this research, we investigated the cleanliness by optimizing the water content of the aqueous stripper in fluidic strip process. The stripping properties of the photoresist with optimized aqueous stripper were compared with the commercial organic stripper. The stripping performance was evaluated by electrical and optical characteristics on the surface of the transparent electrode that compare with stripped the transparent electrode surface and the rare surface before patterning by the photoresist. As a result of the photoresist stripping process of the organic stripper and the aqueous stripper optimized for water content, the aqueous stripper exhibited better electrical and optical characteristics than the organic stripper. In the case of the fluidic strip process with organic stripper, the photoresist dissolves in the stripper solution during stripping which can cause re-adsorption by contamination. Whereas that the aqueous stripper under development seems to decrease the photoresist dissolution in the stripper solution. Because the cyclodextrin contained in the stripper captures organic photoresist into hall of cyclodextrin which stripped through swelling and tearing. The photoresist residue captured by the cyclodextrin can be filtered. After the fluidic stripping process by different chemical stripping mechanism, the cleanliness of the organic stripper and aqueous stripper was compared and analyzed.

• Corrosion Science and Technology
• /
• v.7 no.1
• /
• pp.50-60
• /
• 2008

The majority of the described experimental results deal with relatively pure aluminium. Variations were made in the pretreatment of the aluminum substrates and an investigation was performed on the resulting changes in oxide layer composition and chemistry. Subsequently, the bonding behavior of the surfaces was investigated by using model adhesion molecules. These molecules were chosen to represent the bonding functionality of an organic polymer. They were applied onto the pretreated surfaces as a monolayer and the bonding behavior was studied using infrared reflection absorption spectroscopy. A direct and clear relation was found between the hydroxyl fraction on the oxide surfaces and the amount of molecules that subsequently bonded to the surface. Moreover, it was found that most bonds between the oxide surface and organic functional groups are not stable in the presence of water. The best performance was obtained using molecules, which are capable of chemisorption with the oxide surface. Finally, it was found that freshly prepared relatively pure aluminum substrates, which are left in air, rapidly lose their bonding capacity towards organic functional groups. This can be attributed to the adsorption of contamination and water to the oxide surface. In addition the adhesion of a typical epoxy-coated aluminum system was investigated during exposure to water at different temperatures. The coating was found to quite rapidly lose its adhesion upon exposure to water. This rapid loss of adhesion corresponds well with the data where it was demonstrated that the studied epoxy coating only bonds through physisorptive hydrogen bonding, these bonds not being stable in the presence of water. After the initial loss the adhesion of the coating was however found to recover again and even exceeded the adhesion prior to exposure. The improvement could be ascribed to the growth of a thin oxyhydroxide layer on the aluminum substrate, which forms a new, water-stable and stronger bond with the epoxy coating. Two routes for improvement of adhesion are finally decribed including an interphasial polymeric thin layer and a treatment in boiling water of the substrate before coating takes place. The adhesion properties were finely also studied as a function of the Mg content of the alloys. It was shown that an enrichment of Mg in the oxide could take place when Mg containing alloys are heat-treated. It is expected that for these alloys the (hydr)oxide fraction also depends on the pre-treatment and on the distribution of magnesium as compared to the aluminium hydroxides, with a direct impact on adhesive properties.

• Membrane Journal
• /
• v.25 no.2
• /
• pp.132-143
• /
• 2015

Water is an essential resource for humans, but fresh water becomes scarce due to population growth and contamination of limited resources. Membrane technology has been widely used for water treatment, and forward osmosis is a process which does not need high hydraulic pressure for the operation. However, there are needs for (1) development of novel draw solutes causing low internal concentration polarization and reverse salt flux for high water flux, and (2) development of economic recovery method of the draw solutes in the diluted draw solution. Previous researches on the draw solute include $NaHCO_3$ which can be regenerated by about $60^{\circ}C$ heating, sucrose which can make potable water without additional process, and magnetic nanoparticles which can be regenerated by external magnetic field. Using the principles of forward osmosis process, sea water desalination, wastewater treatment, refinement of proteins, energy generation using pressure retarded osmosis process, preparation of diluted fertilizer, and growing algae for biofuel can be conducted. This paper summarizes characteristics of ideal draw solutes, recovery method of the draw solutes, and various application examples.

• Journal of Bio-Environment Control
• /
• v.24 no.2
• /
• pp.63-68
• /
• 2015

This study was conducted to find out optimum cultivars, and growth temperature and stage in peanut sprout for resveratrol production. Morphological characteristic, days to 50% of the final germination percentage($T_{50}$) and early growth vigor were measured in 8 different peanut varieties. In result 'Jopyeong' appeared to be the most appropriate cultivar for peanut production because of its lower contamination rate, lesser lateral root formation, and thicker hypocotyl length. Optimum temperature for growing peanut sprouts was determined 27. Content of resveratrol was examined by high performance liquid chromatography(HPLC) to investigate appropriate growth stage of peanut sprouts for resveratrol production. Resveratrol was higher than $17.0{\mu}g/g$ in peanuts sprouts 9 days after plating. Considering peanut sprout's shapes and content of resveratrol into account, it was most appropriate to harvest in 9-day after germination.

• Korean Journal of Food Science and Technology
• /
• v.38 no.2
• /
• pp.309-312
• /
• 2006

Aflatoxin $B_1$ in 70 retail samples, including 40 food-grade peanut (28 domestic, 12 imported) and 30 peanut butter (12 domestic, 18 imported) samples, was analyzed by high-performance liquid chromatography (HPLC) with fluorescence detection (FD), and positive samples were confirmed using HPLC with mass spectrometry (MS). Recoveries of aflatoxin $B_1$ spiked at 2 ppb exceeded 80% in both commodities. Detection limits for aflatoxin $B_1$ by HPLC-FD and MS analysis were 0.8 and 0.1 ppb, respectively. Four domestic and six imported peanut samples contained detectable levels of aflatoxin $B_1$ with means of 19 and 32 ppb, respectively. Aflatoxin $B_1$ was found in two domestic and three imported peanut butter samples with mean aflatoxin $B_1$ of 10 and 12 ppb, respectively. Peanut commodity showed more frequent aflatoxin $B_1$ contamination compared to its processed peanut butter product, and levels of aflatoxin $B_1$, especially in imported peanuts, were significantly (p<0.05) higher than those of other commodities. These results suggest peanut and peanut butter are not major contributors to dietary intake of aflatoxin $B_1$ in South Korea.

• Journal of Environmental Health Sciences
• /
• v.34 no.4
• /
• pp.271-278
• /
• 2008

Dialkylated phthalates have been commonly used as plasticizers and a variety of applications. Phthalate diesters have been shown to be developmental and reproductive toxicants. It is very difficult to exactly estimate the dose of dialkylated phthalates taken up by the general population because of environmental contamination. Urinary metabolites of phthalates enabled to estimate internal exposure. The objective of this study was quantitative determination of phthalate metabolites by LC/MS/MS with on-line cleanup method to analyze phthalate metabolites in Korean children's urine. We employed LC/MS/MS with on-line enrichment and column-switching techniques for this biological monitoring. Metabolites determined were 4 primary metabolites; MEHP, MnBP, MiBP, MEP and 2 secondary metabolites of DEHP; 5-OH-MEHP), 5-oxo-MEHP. We analyzed children's urine from 30 boys and 30 girls. The method detection limit of phthalate metabolites were 0.03 ng/mL for MEP, 1.05 ng/mL for MBP, 0.22 ng/mL for MEHP, 0.15 ng/mL for 5-OHMEHP and 0.16 ng/mL for 5-oxo-MEHP, respectively. Switching Column LC/MS/MS was proven to be a useful tool to determine metabolites of phthalate diesters in human urine. The correlation among phthalate metabolites was very high and statistically significant, except MEP. The children's age (months) was negatively correlated to the concentration of phthalate metabolites. The geometric mean concentration of phthalate metabolites (mg/g creatinine) in children's urine were 25.5 for MEP, 130.3 for MnBP, 56.8 for MiBP, 19.5 for MEHP, 85.6 for 5-OH-MEHP and 83.1 for 5-oxo-MEHP, respectively. Levels of estimated daily intake of parent phthalate compounds (${\mu}g$/kg bw/day) were 0.8 for DEP, 5.0 for DnBP, 1.9 for DiBP and $8.9{\sim}14.2$ for DEHP, respectively. Estimated daily intake for DEP and DiBP were lower than those of other studies but the value for DEHP was higher than that of other study.

• Journal of the Korean Society of Safety
• /
• v.31 no.3
• /
• pp.42-46
• /
• 2016

In LCD Display or semiconductor manufacturing processes, the anti-static technology of glass substrates and wafers becomes one of the most difficult issues which influence the yield of the semiconductor manufacturing. In order to overcome the problems of wafer surface contamination various issues such as ionization in decompressed vacuum and inactive gas(i.e. $N_2$ gas, Ar gas, etc.) environment should be considered. Soft X ray radiation is adequate in air and $O_2$ gas at atmospheric pressure while UV radiation is effective in $N_2$ gas Ar gas and at reduced pressure. At this point of view, the "vacuum ultraviolet ray ionization" is one of the most suitable methods for static elimination. The vacuum ultraviolet can be categorized according to a short wavelength whose value is from 100nm to 200nm. this is also called as an Extreme Ultraviolet. Most of these vacuum ultraviolet is absorbed in various substances including the air in the atmosphere. It is absorbed substances become to transit or expose the electrons, then the ionization is initially activated. In this study, static eliminator based on the vacuum ultraviolet ray under the above mentioned environment was tested and the results show how the ionization performance based on vacuum ultraviolet ray can be optimized. These vacuum ultraviolet ray performs better in extreme atmosphere than an ordinary atmospheric environment. Neutralization capability, therefore, shows its maximum value at $10^{-1}{\sim}10^{-3}$ Torr pressure level, and than starts degrading as pressure is gradually reduced. Neutralization capability at this peak point is higher than that at reduced pressure about $10^4$ times on the atmospheric pressure and by about $10^3$ times on the inactive gas. The introductions of these technology make it possible to perfectly overcome problems caused by static electricity and to manufacture ULSI devices and LCD with high reliability.

• Korean Chemical Engineering Research
• /
• v.43 no.5
• /
• pp.549-559
• /
• 2005

Sustainable industrial development which can minimize an ecological effect by the mankind exertion is recently interested due to an environmental contamination and a resource exhaustion problem. An eco-industrial park (EIP) is a community of manufacturing and service businesses seeking enhanced environmental and economic performance through collaboration in managing environmental and resource issues, including energy, water, and materials. EIP developments which improve a production plant within an eco-friendly greenfield and design a new industrial ecosystem are accomplished recently, which can efficiently re-use the waste and resources from each company within EIP. In this review, the outside and domestic case studies of EIP and cornerstone technologies to develop the EIP, such as energy integration, waste reuse, mass flow analysis, water pinch, and life cycle assessment, are summarized.