• 한국산학기술학회논문지
• /
• 제15권2호
• /
• pp.638-645
• /
• 2014

컨테이너 물동량 증대에 따라 항만 내 타부두 간 환적 물동량 수요가 크게 증대되었으나, 기존 YT 방식의 타부두 환적은 이를 효율적으로 뒷받침하지 못하고 있다. 본 논문은 컨테이너항만의 경쟁력 향상을 위한 컨테이너 대용량 이송장치 개발방안을 제시하였다. 시스템 대안의 장단점 분석과 국내 터미널 운영형태를 고려하여 2단적재 다중 편성시스템(DMTS)을 최종 대안으로 선정하였다. DMTS 회전반경은 13.5m로, 국내 기존 항만의 layout에서 즉시 운용 가능할 것으로 판단된다. 특허분석을 통하여 DMTS 핵심기술 항목으로서 현가 조향장치 최적설계, 동력 및 동력전달 장치, 주행제어 및 안전감시장치, 그리고 트레일러 간 연결기 등을 도출하였다. DMTS는 국내 수출입 항만에 적용하는데 문제가 없으며 단위 수송용량이 높아 운영 효율성 개선에 기여할 것으로 판단된다.

• 산업공학
• /
• 제20권4호
• /
• pp.525-538
• /
• 2007

The importance of efficient container transportation becomes more significant each year due to the constant growth of the global marketplace, and studies focusing on shipping efficiency are becoming increasingly important. In this paper, we propose an approach for vehicle scheduling that decreases the number of vehicles required for freight commerce by analyzing and scheduling optimal routes. Container transportation can be classified into round and single-trip transportation, and each vehicle can be linked in a specific order based on the vehicle state after completing an order. We develop a mathematical model to determine the required number of vehicles with optimal routing, and a heuristic algorithm to perform vehicle scheduling for many orders in a significantly shorter duration. Finally, we tested some numerical examples and compared the developed model and the heuristic algorithm. We also developed a decision support system that can schedule vehicles based on the heuristic algorithm.

• 한국항만학회지
• /
• 제4권1호
• /
• pp.3-20
• /
• 1990

The Port of Pusan, the largest port in Korea, handled 23% of total sea borne cargo movement, 14% of imported cargo, 58% of exported cargo and 95% of container cargo in 1989. Also the port of Pusan has been played a key role in handing container cargo throughout the last 10 years. The paper is aimed to survey the effect of sea borne cargo movement to urban transportation, that is, to find traffic volume arising by general/bulk cargoes through the port and to estimate vehicle rated of container tractor tailer on the roads between terminal including conventional piers and ODCY, and finally the following results are obtained. (1) AADV of truck to transport general/bulk cargoes are 6,322 units in 1989,and routes penetrate into the center of city and pass through the most of urban arterials. (2) In the container transport, if HVEF is adopted to 3 of tractor trailer, AVR in each transport freeway 13.7%. (3) IF HVEF is adopted to 6 of tractor trailer. AVR are as follows: BooDoo-Ro 44.1%, WooAm-Ro 39.3%, SooYoung-Ro 17.8%, Urban freeway 20.3%. Based upon these results, the following suggestions were drawn : o ODCY scattered around the city should be unified in a few groups to raise port productivity. o Rail service for inland container transportation should be escalated to relieve urban traffic congestion. o Coastal feeder service between terminal and hinterland should be studied to restrict the penetration of container tractor trailer into the central parts in the urban areas. o Exclusive freeway system for effective container transportation should be implemented to reduce urban traffic delay.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2002년도 춘계공동학술대회
• /
• pp.171-178
• /
• 2002

At the present time, container transportation plays a key role in the international logistics and the efforts to increase the productivity of container logistics become essential for Korean trucking companies to survive in the domestic as well as global competition. This study suggests an approach for determining fleet size for container road transportation with dynamic demand. Usually the vehicles operated by the transportation trucking companies in Korea can be classified into three types depending on the ways how their expenses occur; company-owned truck, mandated truck which is owned by outsider who entrust the company with its operation, and rented vehicle (outsourcing). Armually the trucking companies should decide how many company-owned and mandated trucks will be operated considering vehicle types and the transportation demands. With the forecasted monthly data for the volume of containers to be transported a year, a heuristic algorithm using tabu search is developed to determine the number of company-owned trucks, mandated trucks, and rented trucks in order to minimize the expected annual operating cost The idea of the algorithm is based on both the aggregate production planning (APP) and the pickup-and-delivery problem (PDP). Finally the algorithm is tested for the problem how the trucking company determines the fleet size for transporting containers.

• Industrial Engineering and Management Systems
• /
• 제12권4호
• /
• pp.359-367
• /
• 2013

The amount of international trade is rapidly increasing as a result of globalization. It is well known that as the size of a vessel becomes larger, the transportation cost per container decreases. That is, the economy-of-scale holds even in maritime container transportation. As a result, the sizes of containerships have been steadily increased for reducing transportation costs. In addition, various handling technologies and handling equipment have been introduced to increase the throughput capacities of container terminals. Quay crane (QC) that carries out load/unload operations plays the most important role among various handling equipment in terminals. Two typical examples of advanced QC concepts proposed so far are double trolley QC and supertainer QC. This paper suggests a method of estimating the expected value and the standard deviation of the container handling cycle time of the advanced QCs that involve several handling components which move at the same time. Numerical results obtained by the proposed estimation procedure are compared with those obtained by simulation studies. In order to demonstrate the advantage of advanced QCs, we compared their expected cycle times with those of a conventional QC.

• International Journal of Internet, Broadcasting and Communication
• /
• 제14권2호
• /
• pp.79-88
• /
• 2022

Recently, securing stable supply of fresh food is deemed as one of the important tasks. Accordingly, now the presence of cold chain along with the needs of a comfortable and healthy life is growing as the online market expands and the contactless industry grows, however, cold chain is being studied only in the aspect of ground and sea transportation. And, due to global warming and strengthening global environmental regulations, we believe that it is necessary to convert the existing road-centered logistics system into a railway-centered logistics system, a low-carbon transportation means. Therefore, in this paper we calculated the maximum energy required by the reefer container as a basic research necessary for constructing the low temperature distribution and cold chain based on the reefer container railway, and conducted a study on methods of supplying the reefer container power utilizing 1. tramline, 2. battery, 3. generator. The results of this paper can be utilized as a foundational study for building a cold chain based on a reefer container dedicated to freight trains in the future.

• Journal of Biosystems Engineering
• /
• 제24권5호
• /
• pp.399-406
• /
• 1999

This study was conducted to investigate the labor requirements and transportation cost of paddy for the different harvest and transportation systems for obtaining a basic reference to the improvement of present harvest-transportation systems. One hundred and eighty five farm households with sack type combine harvester and thirty farm households with bulk type combine harvester were surveyed for thirty counties from eight provinces except jeju and also eleven Rice Processing Complex were covered for this survey. This survey was carried from 8th. October 1997 to 5th. November 1997. For the labor requirements, bulk trailer system require 6.8th/ha, 10.3/ha for sack harvest-tractor trailer, and 8.8h/ha for bulk harvest-container bag. The machinery utilization cost for the different paddy harvest-transportation systems, combine sack harvest-tractor trailer system is 282 thousand won/ha, and most economical compared with other systems. Combine bulk harvest with tractor system was 416 thousands won/ha and combine bulk harvest with container bag system was 446 thousands won/ha. In order to propagate bulk harvest-transportation system, a proper bulk transportation means with considering road condition in the paddy field and paddy size should be developed, and considering cycle time it appeared that the proper capacity of bulk container was 3.5ton at the present.

• 한국항해항만학회지
• /
• 제35권2호
• /
• pp.167-172
• /
• 2011

The motivation of this study is the recent advancement of the Straddle Carrier (S/C). Previously Straddle Carrier (S/C) system was used focusing on container lift on/off due to its lower driving speed than that of (Y/T). Shuttle Carrier is evaluated as an upgraded Straddle Carrier. Recently, however, the driving speed of (S/C) has been improved to the level of Yard Tractor and Trailer systems (Y/T), which is 30Km per hour which makes (S/C) qualified as terminal in-yard transportation equipment. This paper, therefore, aims to evaluate three types of terminal in-yard transportation equipments such as (Y/T), (AGV) and the advanced (S/C) from economic perspective. The results revealed that by observing the total costs of equipment, (S/C) is a cheaper option than (Y/T) over 20 years, and than (AGV) over 6 years.

• 한국항해항만학회지
• /
• 제33권8호
• /
• pp.583-588
• /
• 2009

일반적으로 컨테이너 공로 운송은 근거리 운송, 장거리 운송, 셔틀 운송으로 구분되고, 컨테이너 차량은 섀시 형태에 따라 20' 컨테이너 전용, 40' 컨테이너 전용, 콤바인 섀시 차량으로 나눌 수 있다. 셔틀 서비스는 O/D pairs가 같은 물량이 여러 개 발생할 수 있으며, 콤바인 섀시 트레일러는 20ft 컨테이너 2개를 싣거나 한 개의 40ft 컨테이너를 실을 수 있다. 본 논문에서는 셔틀 서비스를 고려한 컨테이너 차량 경로 문제를 다루고자 한다. 문제 정의는 기존의 연구된 신재영, 오성인(2008)의 문제와 유사하지만 셔틀 서비스의 특징을 고려해야 한다. 이에 각 노드를 한 번 이상 방문할 수 있는 pick-up and delivery 제약을 가진 차량경로문제를 근간으로 하여 콤바인 섀시 트레일러를 이용한 컨테이너 셔틀 운송계획 문제를 정의하고, 적합하고 효율적인 해법을 제안하고자 한다.

• 한국정보통신학회논문지
• /
• 제18권9호
• /
• pp.2216-2222
• /
• 2014

최근 냉동컨테이너를 이용한 물동량이 계속적으로 증가하고 있는 추세에서 운송 중 냉동컨테이너의 지속적인 관리가 요구되고 있다. 하지만 현재 냉동컨테이너 모니터링은 물류 전 구간이 아닌 터미널 및 해상 운송 중 선박 내에서만 가능하며, 트럭 또는 기차를 이용하는 육상운송 구간에서는 냉동컨테이너의 모니터링이 이루어지지 않고 있다. 이는 국제해사 기구에서 권고하고 있는 PCT를 이용한 냉동컨테이너 모니터링 방법 또는 TCP/IP, RFID 통신 등을 이용한 기존 냉동컨테이너 모니터링 방법들이 별도의 통신인프라 구축이 필요하기 때문이다. 본 논문에서는 이러한 문제점들을 해결하고 육상운송 구간에서 냉동컨테이너의 모니터링뿐만 아니라 제어까지 가능한 새로운 냉동컨테이너 제어 장비를 제안하고자 한다. 제안된 장비는 모든 냉동컨테이너에 부착되어 있는 데이터 포트를 이용하여 냉동컨테이너의 정보를 수집 후 M2M 통신 기술을 이용하여 별도 통신 인프라 구축 없이 서버로 정보를 전송한다. 또한 서버에서 설정한 냉동컨테이너의 온도 설정 등 제어 정보를 수신하여 냉동컨테이너의 동작 상태를 제어 할 수 있다.