• 지질공학
• /
• 제26권1호
• /
• pp.51-61
• /
• 2016

최근 들어 도심지 재개발과 산업단지 조성 등이 활발하게 진행되면서 깎기 비탈면의 효율적 활용과 민원방지 그리고 환경훼손을 최소화할 수 있는 공법의 필요성이 점차 커지고 있다. 판넬식 옹벽은 지보재 보강을 통해 원지반의 전단강도를 증가시키고 전면판인 프리캐스트 판넬과 지보재를 체결하여 개별적 벽체를 형성시킴으로써 수평토압에 저항하는 공법이다. 프리캐스트 판넬의 적용으로 기존 옹벽에서 발생하던 콘크리트 현장타설에 의한 공기지연과 콘크리트 품질저하 등의 문제는 다소 해결되었지만 비탈면 과다절취에 의한 사토처리 및 토취장 확보, 및 옹벽 전면 콘크리트 노출로 인한 경관성 저하문제는 여전히 미결과제로 남아있는 실정이다. 본 연구에서는 기존 판넬식옹벽의 단점을 보완하기 위하여 판넬 전면을 자연암반형으로 연출하고 수직의 원지반에도 부착이 가능하도록 공정을 개선하였으며 실내 및 현장시험을 통하여 개발된 옹벽의 현장 적용성 평가를 수행하였다. 판넬에 대한 실내시험을 수행하여 자연암반형 판넬의 자체강도 및 거동특성에 대한 검증을 수행하였으며 현장 시험시공을 통하여 수직절취 및 원지반 부착에 대한 현장 적용성을 평가하였다. 또한 시험시공 시 보강재 및 비탈면에 대한 계측 을 수행하였으며 이를 3차원 수치해석 결과와 비교·분석하였다. 실내시험 결과 사보강에 의한 판넬의 펀칭강도 증가를 확인하였으며 현장 시험시공을 통하여 원지반 부착식 옹벽의 시공성 및 현장 적용성을 확인하였다. 또한, 장기계측 및 수치해석적 검증을 통하여 원지반 부착식 옹벽 시스템이 시공중 및 장기적으로 안정성이 확보됨을 확인하였다.

• 자원환경지질
• /
• 제13권2호
• /
• pp.91-103
• /
• 1980

In spite of the fact that the Okcheon system has been rather intensively studied by many geologists since 1945, it still remains as a controversal problem as to its stratigraphy and geologic age. Present study has mainly focused on the upper members of the Okcheon system, namely the Hwanggangri and the Kunjasan formations so as to clarify the lithology, the depositional environment and the tectonic evolution of the formations. The Kunjasan formation lying unconformably over the Hwanggangri formation which is supposed to be a meta-tillite is interpreted as a metamorphosed calcareous argillaceous and/or arenaceous sediments on contract to the idea postulated by some geologists that it was a derivative of silicified Hwanggangri formation. Lithology of the Kunjasan and the Hwanggangri formation is quite different in that the former is white in color, contains few pebbles, and mostly composed of diopside and detrital quartz, whereas the latter is black to dark in color, contains abundant and variable kinds of pebbles, and composed of more argillacous matrix that has been metamorphosed to hornfels. The Hwanggangri and the Kunjasan formations were deposited in the rather deep sea which has transgressed toward northeast from southwest in the late Precambrian time, and the writer (1970) had formerly designated it as Okcheon Paleogeosyncline. With the beginning of Paleozoic era, Okcheon neogeogyncline was formed to the northeast of the old paleogeogyncline area. The transgression of the sea had proceeded toward southwest in which Cambrian strata were accumulated. During this period the area occupied formerly by the paleogeosyncline was uplifted, so that most of the Hwanggangri and the Kunjasan formations were eroded away except in the area close to the neogeosyncline sea coast. This is the reason why the Hwanggangri and the Kunjasan formations are cropped out presently in the area of the vicinity of contact zone of the paleo- and neogeosyncline zones. The age of the Okcheon system has been reconfirmed to be Precambrian from the view of the facts that 1) the Hanggangri formation, the upper member of the Okcheon system is meta-tillite and correlated to the Precambrian tillite in the Yantze basin in China, 2) the Okcheon system has been moderately metamorphosed while other formations of the same age, if it is Paleozoic or later, have not been metamorphosed, and 3) tectonic history and limited areal distribution of the Hwanggangri and the Kunjasan formations is suggestive of Precambian age.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.642-642
• /
• 2013

Graphene, two dimensional single layer of carbon atoms, has tremendous attention due to its superior property such as high electron mobility, high thermal conductivity and optical transparency. Especially, chemical vapor deposition (CVD) grown graphene has been used as a promising material for high quality and large-scale graphene film. Unfortunately, although CVD-grown graphene has strong advantages, application of the CVD-grown graphene is limited due to ineffective transfer process that delivers the graphene onto a desired substrate by using polymer support layer such as PMMA(polymethyl methacrylate). The transferred CVD-grown graphene has serious drawback due to remaining polymeric residues generated during transfer process, which induces the poor physical and electrical characteristics by a p-doping effect and impurity scattering. To solve such issue incurred during polymer transfer process of CVD-grown graphene, various approaches including thermal annealing, chemical cleaning, mechanical cleaning have been tried but were not successful in getting rid of polymeric residues. On the other hand, lithographical patterning of graphene is an essential step in any form of microelectronic processing and most of conventional lithographic techniques employ photoresist for the definition of graphene patterns on substrates. But, application of photoresist is undesirable because of the presence of residual polymers that contaminate the graphene surface consistent with the effects generated during transfer process. Therefore, in order to fully utilize the excellent properties of CVD-grown graphene, new approach of transfer and patterning techniques which can avoid polymeric residue problem needs to be developed. In this work, we carried out transfer and patterning process simultaneously with no polymeric residue by using a metal etch mask. The patterned thin gold layer was deposited on CVD-grown graphene instead of photoresists in order to make much cleaner and smoother surface and then transferred onto a desired substrate with PMMA, which does not directly contact with graphene surface. We compare the surface properties and patterning morphology of graphene by scanning electron microscopy (SEM), atomic force microscopy(AFM) and Raman spectroscopy. Comparison with the effect of residual polymer and metal on performance of graphene FET will be discussed.

• 한국항만경제학회지
• /
• 제29권4호
• /
• pp.157-174
• /
• 2013

우리나라는 2012년 말 기준으로 그리스, 일본, 중국, 독일에 이어 1,608척의 선박과 선복량 7,970만DWT의 상선대를 보유하고 있다. 특히 우리나라의 해운산업은 선박운송사업 중 특히 화물운송에 집중하여 성장해 왔다. 반면에 전문성이 요구되는 해운중개업, 매매 및 대여 등 해운부대산업은 안정적으로 성장하지 못했다. 해운중개업(shipbroking)은 해운사업(shipping business)의 4대 영역인 운임시장(freight), 신조선시장(shipbuilding), 중고선 매매시장(sales & purchase) 및 해체시장(demolition)에서 수요자와 공급자의 거래를 주선하는 해운전문 서비스업이다. 이와 같이 해운중개업은 해운산업과 직접적 연관관계를 갖고 있으며 해운, 조선, 금융, 법률 등 전문지식을 바탕으로 부가가치를 창출하는 지식서비스산업이다. 그러나 해운중개 서비스에 대한 평가요인, 중요도와 공급자와 수요자의 인식의 차이에 대한 연구는 이루어지지 않았다. 따라서 본 연구에서는 해운중개업의 중요성을 인식하고 해운중개 서비스를 평가하기 위한 요인을 도출하고 평가요인 간 상대적 중요도를 산정하였다. 전문가 회의를 개최하여 브레인스토밍을 통해 대분류 3개 항목, 중분류 6개 항목, 소분류 16개 항목의 평가요인을 도출하였다. 도출된 평가요인을 AHP 기법을 이용해 해운중개 서비스의 공급자인 해운중개업체 종사자와 수요자인 해운선사 종사자를 대상으로 조사 분석하였다. 분석결과 대분류에서는 서비스 결과(0.5208), 중 분류에서는 편리성(0.5271), 신뢰성(0.4612) 등이 높게 평가되었다. 종합평가순위에서는 거래신용도(0.1855), 고객의 이윤창출(0.1829), 고객의 목적달성(0.1524)이 가장 중요하게 평가되었다. 두 그룹 간 상대적 중요도에 있어서는 공급자와 수요자는 고객과의 접촉방법, 문제해결 능력, 국내외 고객과의 유대관계에 대하여 중요하게 평가되었다. 그러나 해운전문지식 평가항목은 공급자와 수요자 모두 낮게 평가되었다. 이 결과에 의해 국내 해운중개업체는 단순한 해운중개 업무에서 벗어나 R&D 기능을 강화하여 고급 해운정보를 수집 가공하여 재생산해 낼 수 있는 정보관리, 지식생산 능력이 요구된다고 할 수 있다.

• 시큐리티연구
• /
• 제9호
• /
• pp.201-235
• /
• 2005

본 연구는 민간경호업무에 종사하고 있는 민간경호원과 국내${\cdot}$외 경호업체 및 기관의 교육훈련 실태를 파악하고, 이에 도출된 문제점을 토대로 교육훈련의 성과를 높일 수 있는 교육훈련 프로그램 모델을 설정함으로써 합리적이고 효율적인 교육훈련 프로그램체제를 구축하는데 방향을 제시하고자 한다. 본 연구를 위해 기본적으로는 국내외에서 발간된 문헌과 학술지 및 연구논문 등과 같은 문헌자료의 수집${\cdot}$분석을 하였고, 실증적인 자료 활용을 위해서 인터넷과 국내${\cdot}$외 관련협회, 학회, 기관, 경찰청 및 인터폴의 협조를 통해 자료를 수집 하였으며, 국내 민간경호업체의 교육훈련 프로그램은 민간경호업체 실무자 인터뷰 기법을 활용하여 연구하였다. 국내 민간경호업체에서는 교육훈련 프로그램 계획시 이론교육을 최소화하고 실무 중심적 교육으로 교육훈련 프로그램을 설정해야 하고, 이론교육 또한 실무 교육과 연계된 교육 내용으로 구성되어야 할 것이다. 민간경호원 교육훈련 프로그램의 교육과목은 이론 교육으로는 경호, 개론, 경호 계획, 정보 수집, 민간경비, 경호 방법, 테러 및 테러리즘, 관련 법령, 경호 심리, 전자 보안, 경호 분석 기법, 기업 소개, 직업관에 관한 교육훈련 프로그램으로 구성되어야 한다. 실무 교육으로는 선발 및 예방 경호, 근접수행 경호, 차량 경호, 경호 운전, 경호무도 및 호신술, 응급 처치, 경호 장비, 총기류 및 사격, 경호 의전, 고객 만족, 시설보안 및 경비, 소방 교육, 팀워크 훈련, 폭발물 및 위험물, 체력 단련, 문서 작성 실무, 봉사 활동, 외국어 교육에 관한 교육훈련 프로그램으로 구성되어야 한다.

• Tribology and Lubricants
• /
• 제36권2호
• /
• pp.105-115
• /
• 2020

This paper presents a numerical study on the rotordynamic analysis of a dual-spool turbofan engine in the context of blade defect events. The blades of an axial-type aeroengine are typically well aligned during the compressor and turbine stages. However, they are sometimes exposed to damage, partially or entirely, for several operational reasons, such as cracks due to foreign objects, burns from the combustion gas, and corrosion due to oxygen in the air. Herein, we designed a dual-spool rotor using the commercial 3D modeling software CATIA to simulate blade defects in the turbofan engine. We utilized the rotordynamic parameters to create two finite element Euler-Bernoulli beam models connected by means of an inter-rotor bearing. We then applied the unbalanced forces induced by the mass eccentricities of the blades to the following selected scenarios: 1) fully balanced, 2) crack in the low-pressure compressor (LPC) and high pressure compressor (HPC), 3) burn on the high-pressure turbine (HPT) and low pressure compressor, 4) corrosion of the LPC, and 5) corrosion of the HPC. Additionally, we obtained the transient and steady-state responses of the overall rotor nodes using the Runge-Kutta numerical integration method, and employed model reduction techniques such as component mode synthesis to enhance the computational efficiency of the process. The simulation results indicate that the high-vibration status of the rotor commences beyond 10,000 rpm, which is identified as the first critical speed of the lower speed rotor. Moreover, we monitored the unbalanced stages near the inter-rotor bearing, which prominently influences the overall rotordynamic status, and the corrosion of the HPC to prevent further instability. The high-speed range operation (>13,000 rpm) coupled with HPC/HPT blade defects possibly presents a rotor-case contact problem that can lead to catastrophic failure.

• 마이크로전자및패키징학회지
• /
• 제27권3호
• /
• pp.49-54
• /
• 2020

신축/유연한 전극을 무언가에 접착하거나 전극에 무언가를 접착하기 위해서는 전극의 특성에 맞는 전도성 접착제가 필요하다. 전도성 접착제는 접착성과 전도성이 필수적으로 요구된다. 특히 접착성 부분은 내구성과 내열성이 요구되며 기존 접착제와 다르게 전도성까지 보유해야한다. 그러기 위해서는 강도와 접착성이 좋은 에폭시를 접착제로 선정하였고 여기에 기존 주제와 경화제로 이루어진 2액형 소재가 아닌 가소제와 보강제까지 혼합하여 4액형 소재를 사용하여 신축/유연성을 고분자에 부여하였다. 전도성 필러는 비저항이 낮은 재료인 은으로 선정하였고 높은 전도성을 위해 3가지 모양의 Ag 입자를 사용해 패킹성을 높였다. 이렇게 개발된 전도성 접착제와 실제 판매되고 있는 에폭시 기반 전도성 접착제 2개와 전도성을 비교하였고 실제 판매되고 있는 제품보다 약 10배정도의 우수한 전도성 결과가 도출되었다. 그리고 가소제와 보강제 여부에 따른 전도성, 기계적 특성, 접착력, 강도를 평가하였다. 또한 120℃에서 5분 경화 후에 60%의 인장에도 문제가 없었으며 연필경도는 6H로 우수하게 측정되었다. 3M tape test를 통해 전극의 접착력을 확인한 결과 바인더의 배합 비율에 관계없이 모두 우수한 결과를 보였다. 전극 위에 Cu sheet를 전도성 접착제를 통해 부착시킨 후 접촉저항을 확인한 결과 0.3 Ω으로 우수한 성능을 보였다.

• 대한치과보철학회지
• /
• 제46권3호
• /
• pp.255-260
• /
• 2008

STATEMENT OF PROBLEM: Preparation of implant beds with lasers is considered a safe and reliable method, but the accuracy of this technique has not been examined. PURPOSE: The purpose of this study was to evaluate the accuracy and effectiveness of implant bed preparation using an Er,Cr:YSGG laser. MATERIAL AND METHODS: An Er,Cr:YSGG laser was applied to pig rib bone. The laser was employed at a 5.75 W power setting, 30 Hz/sec pulse repetition, and 70 ${\mu}s$ pulse duration with 50 % water and 60% air spray. According to laser tips the groups were divided as follows; Group 1: paralleled - shaped sapphire tip (0.6 mm${\Phi}$), Group 2: paralleled - shaped zirconia tip (0.6 mm${\Phi}$), Group 3: tapered sapphire tip (0.4 mm${\Phi}$). The Er,Cr:YSGG laser tip was separated by 1 mm from the bone and applied for 15 seconds in a non-contact mode. After the application, the bone was sectioned for specimens. Histologic measurements were determined by computerized morphometry. The length of the prepared bone surface was measured and the width of the entrance was measured. The results were analyzed with one-way ANOVA (P<0.05). RESULTS: The prepared length of group 3 was longer than that of group 2. The prepared bone width was larger than the width of the laser tip in every group. Additional bone removal was observed adjacent to the prepared area and displayed an irregular surface. CONCLUSION & DISCUSSION: Different cutting effects were observed according to the laser tip, emphasizing the importance of proper tip selection in the clinical setting. This preliminary study supported the existence of hydrokinetic effects.

• 대한치과보철학회지
• /
• 제44권5호
• /
• pp.594-605
• /
• 2006

Statement of problem: Modification of titanium implant surface has potential to ensure clinically favorable performance that several surface modification technologies have been introduced. Among the methods. anodizing method and sol-gel hydroxyapatite coating method have gained much interest due to its roughness and chemical composition of the coating layer, but more of its biocompatibility result is required. Purpose : The purpose of this study was to compare bone-implant interface shear strength of four different surface treated implants as time elapsed. Resonance frequency analysis(RFA) and removal torque measurement methods were employed to measure implant stability at one week and six week after implantation. Material and method: A total of 80 screw-shaped implant [20 machined, 20 resorbable media blasted(RBM), 20 anodized, and 20 anodized+hydroxyapatite sol-gel coated] were prepared, and one of each group was implanted in the tibia of a New Zealand white rabbit that total 20 of them were used. In order to test the implant stability and implant-tissue interface contact changing in the bone bed, each 10 rabbit were sacrificed 1 week and 6 week later while resonance frequency and removal torque were measured. One-way analysis of variance and the Tukey test were used for statistical analysis. Results : The results were as follows. 1. There was no statistically significant difference of implant stability quotients(ISQ) value in RFA between individual groups after 1 week of implantation and 6 weeks(p>0.05). But, there was statistically significant increase of ISQ value in 6 weeks group compared to 1 week group(p<0.05). 2. There was no statistically significant difference in removal torque analysis between individual groups after 1 week of implantation and 6 weeks(p>0.05). but there was statistically significant increase in all 4 groups after 6 weeks compared to 1 week later(p<0.05). 3. There was no statistically significant difference in removal torque analysis between anodized group and HA coating after anodic oxidation 6 weeks later(p>0.05), but significant difference was appeared in both groups compared to RBM group and smooth-machined group(p<0.05). Conclusions : It can be suggested that changes in surface characteristics affect bone reactions. Anodized and anodized+hydroxyapatite sol-gel coating showed significantly improved bone tissue response to implants, but further study on the effect of hydroxyapatite dissolution is needed.

• Asian Pacific Journal of Cancer Prevention
• /
• 제13권12호
• /
• pp.5917-5935
• /
• 2012

Background: Hepatitis C virus (HCV) causes acute and chronic human hepatitis infection and as such is an important global health problem. The virus was discovered in the USA in 1989 and it is now known that three to four million people are infected every year, WHO estimating that 3 percent of the 7 billion people worldwide being chronically infected. Humans are the natural hosts of HCV and this virus can eventually lead to permanent liver damage and carcinoma. HCV is a member of the Flaviviridae family and Hepacivirus genus. The diameter of the virus is about 50-60 nm and the virion contains a single-stranded positive RNA approximately 10,000 nucleotides in length and consisting of one ORF which is encapsulated by an external lipid envelope and icosahedral capsid. HCV is a heterogeneous virus, classified into 6 genotypes and more than 50 subtypes. Because of the genome variability, nucleotide sequences of genotypes differ by approximately 31-34%, and by 20-23% among subtypes. Quasi-species of mixed virus populations provide a survival advantage for the virus to create multiple variant genomes and a high rate of generation of variants to allow rapid selection of mutants for new environmental conditions. Direct contact with infected blood and blood products, sexual relationships and availability of injectable drugs have had remarkable effects on HCV epidemiology. Hundreds of thousands of people die each year from hepatitis and liver cancer caused by HCV virus infection. Approximately 80% of patients with acute hepatitis C progress into a chronic disease state leading to serious hepatic disorders, 10-20% of which develop chronic liver cirrhosis and hepatocellular carcinoma. The incubation period of HCV is 6-8 weeks and the infection is often asymptomatic so it is very hard to detect at early stages, making early treatment very difficult. Therefore, hepatitis C is called a "silent disease". Neutralizing antibodies are produced against several HCV proteins during infection but the virus mutates to escape from antibodies. Some patients with chronic hepatitis C may have some symptoms such as fatigue, muscle aches, nausea and pain. Autoimmune and immunecomplex-mediated diseases have also been reported with chronic HCV infection.