• Applied Chemistry for Engineering
• /
• v.16 no.6
• /
• pp.809-814
• /
• 2005

In this work, the thermal properties of epoxy coating system on the liner plate in the containment structure of nuclear power plants had been examined by irradiation and design basis accident (DBA) conditions. The effect of immersion in hot water on adhesion strength of the coating system had been also studied. The glass transition temperature ($T_g$) and thermal stability of ET-5290/carbon steel A 32 epoxy coating systems were measured by DSC and TGA analyses, respectively. Contact angle measurements were used to determine the effect of immersion on the surface energetics of epoxy coating system, with a viewpoint of surface free energy. Adhesion tests were also executed to evaluate the adhesion strength at interfaces between carbon steel plate and epoxy resins. As a result, it was found that the irradiation led to an improvement of internal crosslinked structure in cured epoxy systems, resulting in significantly increasing the thermal stability, as well as the $T_g$. Also, the immersion in hot water made a role in the post-curing of epoxy resins and increased the mechanical interlocking of the network system, resulting in increasing the adhesion strength of the epoxy coating system.

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.3
• /
• pp.75-80
• /
• 2019

Silicon solar cells have been widely used as a most promising renewable energy source due to eco-friendliness and high efficiency. As modules of silicon solar cells are connected in series for a practical electricity generation, a large voltage of 500-1,500 V is applied to the modules inevitably. Potential-induced degradation (PID), a deterioration of the efficiency and maximum power output by the continuously applied high voltage between the module frames and solar cells, has been regarded as the major cause that reduces the lifetime of silicon solar cells. In particular, the migration of the $Na^+$ ions from the front glass into Si through the anti-reflection coating and the accumulation of $Na^+$ ions at stacking faults inside Si have been reported as the reason of PID. In this research, the thickness effect of $SiO_x$ layer that can block the migration of $Na^+$ ions on the reduction of PID is investigated as it is incorporated between anti-reflection coating and p-n junction in p-type PERC solar cells. From the measurement of shunt resistance, efficiency, and maximum power output after the continuous application of 1,000 V for 96 hours, it is revealed that the thickness of $SiO_x$ layer should be larger than 7-8 nm to reduce PID effectively.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.5
• /
• pp.408-416
• /
• 2021

In the ultrasonic dispersion, in order to avoid direct contact of the radiation surface of ultrasonic transducers with a liquid sample, the liquid sample is separated by a glass container and it receives ultrasonic energy through an acoustic medium. The transmission efficiency of the ultrasonic energy in the multi-layered ultrasonic system is an important factor. In this study, we suggested a method that can improve the ultrasonic energy transfer efficiency by using a propylene glycol solution as a liquid matching layer in the multi-layered acoustic system. In this method, a propylene glycol solution was filled between the Langevin-type ultrasonic transducer and the luminol solution and the sonoluminescence phenomena in the luminol solution, which is caused by nonlinear effect of high power ultrasound radiated from the transducer, was examined by using a Photo Multiplier Tube (PMT). The transmission efficiency depending on the concentration of propylene glycol solution was observed, and we can see that as the concentration of the propylene glycol solution increased, the matching effect increased while the acoustic attenuation increased. It was confirmed that there is an optimal concentration compromised these two conflicting conditions, and the optimum concentration of the propylene glycol solution was determined experimentally.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.12
• /
• pp.1991-2000
• /
• 2018

Objective: Triplet-born lambs are less likely to survive to weaning than twin-born or single-born lambs. Appropriate ewe-lamb bonding behaviours and lamb vigour behaviours are necessary for survival of lambs. The aim of this experiment was to determine whether maternal nutrition during late pregnancy influenced behaviour of the ewe and her lambs soon after birth, and to determine whether mid-pregnancy body condition score (BCS) influenced any behavioural response. Methods: The experiments included ewes that were in BCS 2.0, 2.5, or 3.0 in mid-pregnancy and were fed either ad libitum or to pregnancy-maintenance requirements in late-pregnancy (day 115 until 136 in experiment one, and day 128 until 141 in experiment two). The time taken for lambs to stand, contact dam, suck from dam and follow dam was recorded three to 18 h after birth. The number of high- and low-pitched bleats emitted by the ewe and lambs was recorded, along with maternal behaviour score (MBS) of the ewe. Lambs in experiment two underwent a maternal-recognition test at 12 or 24 h. Results: There were significant effects of feeding treatment on bleating behaviour of ewes and lambs, but these were inconsistent among BCS groups and between experiments. Lamb vigour behaviours were not affected by feeding treatment. In experiment one, there was no effect of feeding treatment or BCS on MBS, but in experiment two, ewes in BCS3 in mid-pregnancy had greater MBS than ewes in BCS2 in mid-pregnancy (MBS 3.1/5 vs MBS 2.1/5; p<0.05). Conclusion: Given there were no repeatable effects on behaviour of ewes and lambs, ad libitum feeding rather than feeding for pregnancy-maintenance requirements cannot be used to improve behaviours soon after birth of triplet-bearing ewes in BCS 2-3 and their lambs in extensive pastoral conditions.

• Korean Journal of Family Social Work
• /
• no.57
• /
• pp.159-182
• /
• 2017

With using the 4th and 5th wave of KLoSA(Korean Longitudinal Study of Aging), this study analyzed the effect of the factors of Rowe and Kahn's successful aging model on the life satisfaction of older adults. The target population of this study was 1,385 who is older than 65. As data analysis, hierarchical multiple regression was used. The variables such as demographics, avoiding diseases and disability, high cognitive and physical function and engagement with life, relationship with adult children were entered hierarchically for the regression analysis. Since there are differences of longevity by gender, the difference of factors of successful aging were compared by marital status. In this study (besides Rowe and Kahn's successful aging model such as avoiding disease and disability, high cognitive and physical function, and engagement with life), the relationships with adult children were analyzed additionally. Findings show that married older adults were older and reside with their adult children twice more than those who do not have a spouse. According to research results, regular exercise and memory skills were important factors of affecting life satisfaction. Among the categories of active engagement, meeting with friends, relatives and neighbors were significant. Contact with their adult children by mail or phone were the most important factors affecting the older adults' life satisfaction. The three parts of successful aging were various depending on the operationalization of variables.

• Journal of Society of Preventive Korean Medicine
• /
• v.23 no.1
• /
• pp.27-47
• /
• 2019

Purpose : This study was designed to identify the perception and practice level of infection control among korean medical doctors and to identify factors that may influence the performance and practice level. Methods : Data were collected using the on­line survey method. Seven hundred and eighty four Korean medical doctors(KMD) participated the survey. The study was conducted from December 2018 to January 2019. Results : The results of this study are as follows. 1. Participants who experienced infection risk by needles or sharp instruments were 596(76%). and participants who had experienced blood or body fluid contact with the mucous membrane or skin of the patient during treatment were 226(28.8%) of them. 2. The degree of perception and practice of the infectious guideline was higher in the group over 50 years, in the doctor group, in the group with more than 6 years experience in clinic and in the group who work in the hospital. (p < 0.05) 3. In the performance of the infection control management related to the Korean medical treatment, the practice level of the article 'Discard the remaining needle that used for one patient' was the lowest at 4.02, 'Identify the patient and check the validity period of sterilization of medicines or instruments' was the second lowest in 4.16. 4. Among the contents of "Prevention of Nosocomial infection and Sanitary Safety Guidelines" issued by the Korean Medical Association in 2008, the guideline "Prevention of infection by pathogens such as HIV, MRSA, SARS" were lowest article in the perception and practice level of participants. 5. Regression analysis was performed to find out the factors affecting perception and performance of the participants. The regression model showed significant difference in the regression model of the working years. (p < 0.05) 6. In order to examine the effect of the variables on the perception and practice of the infectious guideline, the mediated effect of the knowledge and education level according to the years of working, age, education degree was found to be significant only in the education degree variable. (p < 0.05) In conclusion : in order to improve the perception and practice of infectious control of Korean medicine doctors, it is necessary to include the contents of infection management as essential education during the continuing education of Korean medicine association.

• Informatization Policy
• /
• v.28 no.2
• /
• pp.57-80
• /
• 2021

This study aimed to identify the causes of adult cyberbullying, an issue which arouses little academic interest despite its seriousness and its harmful consequences, in order to provide basic data for the formulation of reasonable measures for preventing and reducing adult cyberbullying. To that end, the author of the study analyzed the results of the government-led Cyber Violence Survey conducted in 2019. First, the online survey panel owned by the research company selected a sample of 1,500 adult men and women in their 20s to 50s in proportion to reflect the composition of the local population. The survey was conducted online, with male subjects and female subjects accounting for 51.5% and 48.7% of the respondents, respectively. The result of the analysis shows that the respondents' attitude towards cyberbullying was fully mediaed according to such factors as gender, age, family relations, relationship with colleagues, Internet usage time, and contact with illegal content. In addition, partial mediation was observed with regard to online delinquency colleague numbers and cyberbullying victimization. As a result, the respondents' attitude towards cyberbullying was found to be the most important factor affecting adult cyberbullying. Based on these results, this study suggests that the formation of a non-conservative attitude towards cyberbullying should be considered to be more important than any other factors when preparing programs aimed at preventing cyberbullying.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.16 no.1
• /
• pp.113-126
• /
• 2021

After the Corona 19 pandemic in the first half of 2020, the business environment has been changed in a very different way. The convergence in digital device would be the keyword of the future business. Due to the Corona 19 incident, the ability to utilize digital media devices has emerged as an important topic as people are focusing on online. The Corona incident has reminded us of how important digitalization is at all points of contact. This study analyzed the effects of digital media device and communication utilization capabilities on entrepreneurial intention by reflecting the mediating effect of risk-taking and proactiveness. For this study, a survey of 250 ordinary people was conducted and finally 212 valid questionnaires were collected. Statistical techniques were analyzed using Amos23. The analysis of the collected data showed that digital media device utilization and communication utilization did not directly affect entrepreneurship intentions, but it was confirmed that entrepreneurship risk-taking would have an intention to start a business. Through this, it was suggested that the development of start-up programs based on entrepreneurship and digital media utilization capabilities should be strengthened in a smart society centered on information and communication to expand job creation for the digital generation.

• International Journal of Computer Science & Network Security
• /
• v.22 no.8
• /
• pp.105-112
• /
• 2022

Innovation is considered as an implemented innovation in education - in the content, methods, techniques and forms of educational activity and personality education (methods, technologies), in the content and forms of organizing the management of the educational system, as well as in the organizational structure of educational institutions, in the means of training and education and in approaches to social services in education, distance and multimedia learning, which significantly increases the quality, efficiency and effectiveness of the educational process. The classification of currently known pedagogical technologies that are most often used in practice is shown. The basis of the innovative activity of a modern teacher is the formation of an innovative program-methodical complex in the discipline. Along with programmatic and content provision of disciplines, the use of informational tools and their didactic properties comes first. It combines technical capabilities - computer and video technology with live communication between the lecturer and the audience. In pedagogical innovation, the principles reflecting specific laws and regularities of the implementation of innovative processes are singled out. All principles are elements of a complex system of organization and management of innovative activities in the field of education and training. They closely interact with each other, which enhances the effect of each of them due to the synergistic effect. To improve innovative activities in the training of students, today computer technologies are widely used in pedagogy as a science, as well as directly in the practice of the pedagogical process. They have gained the most popularity in such activities as distance learning, online learning, assistance in the education management system, development of programs and virtual textbooks in various subjects, searching for information on the network for the educational process, computer testing of students' knowledge, creation of electronic libraries, formation of a unified scientific electronic environment, publication of virtual magazines and newspapers on pedagogical topics, teleconferences, expansion of international cooperation in the field of Internet education. The article considers computer technologies as the main building material for the entire society. In the modern world, there is a need to prepare a person for life in a multimedia environment. This process should be started as early as possible, because the child's contact with the media is present almost from the moment of his birth.

• Journal of the Society of Naval Architects of Korea
• /
• v.60 no.3
• /
• pp.186-192
• /
• 2023

According to the regulation on the pollution of the marine environment, SOx emission from ships has to be reduced. A SOx scrubbing system installed in a funnel of a ship is considered in order to reduce SOx emission. A scrubbing layer with a porous material is present in the funnel to increase the contact area between exhaust gas and water. In this study, experiments on the pressure drop characteristics in the scrubbing layer are conducted to investigate the effect of the scrubber on the engine load. The pressure drop according to flow rate of air instead of exhaust gas was measured for fillers such as sphere, pall ring and saddle in the scrubbing layer. First of all, porosity is experimentally measured for the three types of filler and it is confirmed that the porosity of the saddle-type filler was the largest. The pressure drop according to the change in air flow rate was measured for the three types of fillers in the scrubbing layer. As a result, the pressure drop was the smallest in the scrubbing layer with the saddle-type filler which has the largest porosity. In addition, the effect of spraying water flowing counter flow against air flow is experimentally examined. It is known that the pressure drop is increased because the air flow space is reduced when water is sprayed. In the case of the saddle, the pressure drop is about 1.5 to 2 times greater than that when only air flows at the optimum exhaust gas-water injection ratio.