• Animal Bioscience
• /
• v.34 no.9
• /
• pp.1559-1568
• /
• 2021

Objective: Bedding materials directly contact hooves of dairy cows and they may serve as environmental sources of lameness-associated pathogen. However, the specific composition of bacteria hidden in bedding materials is still not clear. The aim of this study was to determine the effect bedding material and its bacterial composition has on lameness of Holstein heifers. Methods: Forty-eight Holstein heifers with similar body weights were randomly assigned into three groups including sand bedding (SB), concrete floor (CF), and compost bedding (CB). Hock injuries severity and gait performance of dairy cows were scored individually once a week. Blood samples were collected at the end of the experiment and bedding material samples were collected once a week for Illumina sequencing. Results: The CF increased visible hock injuries severity and serum biomarkers of joint damage in comparison to SB and CB groups. Besides, Illumina sequencing and analysis showed that the bacterial community of CB samples had higher similarity to that of SB samples than CF samples. Bacteria in three bedding materials were dominated by gastrointestinal bacteria and organic matter-degrading bacteria, such as Actinobacteria, Firmicutes, and norank JG30-KF-cM45. Lameness-associated Spirochaetaceae and Treponeme were only detected in SB and CB samples with a very low relative abundance (0% to 0.08%). Conclusion: The bacterial communities differed among bedding materials. However, the treponemes pathogens involved in the pathogenesis of lameness may not be a part of microbiota in bedding materials of dairy cows.

• Journal of The Korean Society of Clinical Toxicology
• /
• v.20 no.2
• /
• pp.45-50
• /
• 2022

Purpose: This study utilizes the NEDIS (National Emergency Department Information System) database to suggest a predictive model for snakebite and envenomation in Korea by analyzing the geographical distribution and seasonal variation of snakebite patients visiting the ER. Methods: This was a retrospective study on snakebite patients visiting the ER using the NEDIS database from January 2014 to December 2019. The subjects include patients with the KCD (Korea Standard Classification of Disease) disease code T63.0 (Toxic effect of contact with snake venom). Geographical location, patient gender, patient age, date of ER visit, treatment during the ER stay, and disposition were recorded to analyze the geographical distribution and seasonal variation of snakebite patients in Korea. Results: A total of 12,521 patients were evaluated in this study (7,170 males, 54.9%; 5,351 females, 40.9%). The average age was 58.5±17.5 years. In all, 7,644 patients were admitted with an average admission time of 5.04±4.7 days, and 2 patients expired while admitted. The geographical distribution was Gyeongsang 3,370 (26.9%), Cheonra 2,692 (21.5%), Chungcheong 2,667 (21.3%), Seoul Capital area 1,999 (16.0%), Kangwon 1,457 (11.6%), and Jeju 336 (2.7%). The seasonal variation showed insignificant incidences in winter and higher severity in spring and summer than in fall: winter 27 (0.2%), spring 2,268 (18.1%), summer 6,847 (54.7%), and fall 3,380 (27.0%). Conclusion: Patients presenting with snakebites and envenomation in the emergency room were most common in the Gyeongsang area and during summer. The simple seasonal model predicted that 436 snakebites and 438 envenomation cases occurred in July and August. The results of this study can be applied to suitably distribute and stock antivenom. Appropriate policies can be formed to care for snakebite patients in Korea.

• Journal of Adhesion and Interface
• /
• v.24 no.2
• /
• pp.69-75
• /
• 2023

Recently, the application of paint protection films (PPFs) for automobiles having a self-recovery coating layer has been grown up. In this study, we report the evaluation results on the basic physical properties of a poly(vinyl chloride)- based PPF containing poly(urea-urethane) hybrid self-recovery coating layer. Depending on the main chemical composition and the thickness of poly(urea-urethane)-based coating layer for PPF, the self-recovery performance by an optical microscope and the stain resistance through color difference value are measured. To improve the surface properties and show its easy-cleaning effect against the polluted things, silicone-modified polyacrylate is introduced to the self-recovery coating composition. The contact angle of water on the coated surface is confirmed to show its hydrophobic surface. Finally, accelerated weathering test of paint protection film with poly(urea-urethane) hybrid coating layer is performed to check the possibility of discoloration and deformation due to long-term exposure on harsh condition.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.47 no.1
• /
• pp.12-24
• /
• 2023

Sitophilus oryzae L. (Rice Weevil) is a stored pest of rice that causes extensive loss throughout the world. We tested the leaf powders of 12 plant species viz., Chrysanthemum sp., Cinnamomum zeylanicum, Citrus grandis, Citrus limon, Gliricidia sepium, Gymnema sylvestre, Hemigraphis colorata, Michelia champaca, Moringa oleifera, Murraya koenigii, Polyalthia longifolia, and Sauropus androgynus at dosages of 1.00, 1.50, 2.00 and 3.00g against the adult rice weevil and mortality was recorded at 1, 2, 3, 5, 7, 12 and 2l days after treatment (DAT) by direct contact toxicity for their adulticidal effect. We observed 100 percent adult mortality in C. zevlanicum and M. koenigii among the tested leaf powders. In addition, the first-time tested H. colorata and S. androgynus also caused high mortality compared to other plants. All the plant powders caused moderate to high adult mortality. Hence, these plants could be effective botanical insecticides against S. oryzae as they comprise a potential source of bioactive chemicals and are generally free from toxicants. Applications of these natural derivatives in S. oryzae control could reduce the cost of control methods and storage of rice contamination. Therefore, the present study indicates that some plant extracts can be used as an alternative to toxic synthetic chemicals in the management of rice weevils.

• Composites Research
• /
• v.20 no.6
• /
• pp.1-7
• /
• 2007

Expanded graphite/carbon fiber hybrid conductive polymer composites were fabricated by the preform molding technique. The conductive fillers were mechanically mixed with a phenol resin to provide an electrical property to composites. The conductive filler loading was fixed at 60wt.% to accomplish a high electrical conductivity. Expanded graphites were excellent in forming a conductive networking by direct contacts between them while it was hard to get the high flexural strength over 40MPa with using only expanded graphite and phenol resin. In this study, carbon fibers were added in composites to compensate the weakened flexural strength. The effect of carbon fibers on the mechanical and electrical properties was examined according to the weight ratio of carbon fiber. As the carbon fiber ratio increased, the flexural strength increased until the carbon fiber ratio of 24wt.%, and then decreased afterward. The electrical conductivity gradually decreased as the increase of the carbon fiber ratio. This was attributed to the non-conducting regions generated among the carbon fibers and the reduction of the direct contact areas between expanded graphites.

• Korean Journal of Materials Research
• /
• v.33 no.5
• /
• pp.214-221
• /
• 2023

As a filler metal for lowering the melting point of Ag, many alloy metal candidates have emerged, such as cadmium, with zinc, manganese, nickel, and titanium as active metals. However, since cadmium is known to be harmful to the human body, Cd-free filler metals are now mainly used. Still, no study has been conducted comparing the characteristics of joints prepared with and without cadmium. In addition, studies have yet to be conducted comparing the typical characteristics of brazing filler metals with special structures, and the joint characteristics of brazing filler metals with available frames. In this study, the characteristics of junctions of silver-based intercalation metals were compared based on the type of filler metal additives, using a special structure, a filler metal sandwich structure, to protect the internal base metal. The general filler metal was compared using the structure, and the thickness of the filler metal according to the thickness was reached. A comparison of the characteristics of the junction was conducted to identify the characteristics of an intersection of silver-based brazing filler metal and the effect on joint strength. Each filler metal's collective tensile strength was measured, and the relationship between joint characteristics and tensile joint strength was explored. The junction was estimated through micro strength measurement, contact angle measurement with the base metal when the filler metal was melted, XRD image observation, composition analysis for each phase through SEM-EDS, and microstructure phase acquisition.

• Membrane and Water Treatment
• /
• v.14 no.2
• /
• pp.85-93
• /
• 2023

Membrane separation is widely used for several applications such as water treatment, membrane reactors and climate change. Cross-linked organic-inorganic hybrid polyvinylidene fluoride (PVDF) / Tetraethyl orthosilicate (TEOS) was adopted for the preparation of optimized hollow membrane (HFM) for membrane distillation or other low pressure separators for mechanical properties and permeability under varying pretreatment schemes. HFMs were prepared on semi-pilot membrane fabrication system. Novel adopted post-treatment schemes involved soaking in glycerol, magnesium sulphate (MgSO₄), sodium hypochlorite (NaOCl), and isopropanol for different durations. All fibers were characterized for morphology using a scanning electron microscope (SEM), surface roughness using atomic force microscope (AFM), elemental composition by examining Energy Dispersive Spectroscopy (EDS), water contact angle (CA°) and porosity. The performance of the fibers was evaluated for pure water permeation flux (PWF). Post-treatment with MgSO₄ gave the highest both tensile modulus and flux. Assessment of properties and performance revealed comparable results with other organic-inorganic separators, HF or flat. In spite of few reported data on post treatment using MgSO₄ in presence of TEOS, this proves the potential of low cost treatment without negative impact on other membrane properties. The flux is also comparable with hypochlorite which manifests substantial precaution requirements in actual industrial use.The relatively high values of flux/bar for sample treated with TEOS, post treated with MgSO₄ and hypochlorite are 88 and 82 LMH/bar respectively.

• Journal of the Korean Wood Science and Technology
• /
• v.50 no.2
• /
• pp.93-103
• /
• 2022

Currently, biofibers are used as a reinforcement in polymer composites for structural elements and construction materials instead of the synthetic fibers which cause environmental problems and are expensive. One of the chemicals with a pH close to neutral that can be potentially used as a modified fiber material is sodium chloride (NaCl). Therefore, this study aims to investigate the characteristics of a composite board made from NaCl-treated kenaf fiber. A completely randomized design method was used with consideration of two factors: the content of NaCl in the treatment solution (1 wt%, 3 wt%, and 5 wt%) and the duration of immersion of fibers in the solution (1 h, 2 h, and 3 h). The NaCl treatment was conducted by soaking the fibers in the solution for different durations. The fibers were then rinsed with water until the pH of the water reached 7 and subsequently dried inside an oven at 80℃ for 6 h. Kenaf fiber and epoxy were mixed manually with the total loading of 20 wt% based on the dry weight of the fiber. Physical and mechanical properties of the fibers were then evaluated based on JIS A 5908 particleboard standards. The results showed that increasing NaCl content in the fiber treatment solution can increase the physical and mechanical properties of the composite board. The properties of fibers treated with 5 wt% NaCl for 3 h were superior with a modulus of elasticity of 2.085 GPa, modulus of rupture of 19.77 MPa, internal bonding of 1.8 MPa, thickness swelling of 3%, and water absorption of 10.9%. The contact angle of untreated kenaf fibers was 104°, which increased to 80° and 73° on treatment with 1 wt% and 5 wt% NaCl for 3 h, respectively.

• Journal of Preventive Medicine and Public Health
• /
• v.55 no.2
• /
• pp.182-192
• /
• 2022

Objectives: Understanding the factors influencing mothers' decision to breastfeed their infants is essential to formulate effective breastfeeding interventions. This study explored the determinants of optimal breastfeeding indicators in Indonesia. Methods: We used the 2017 Indonesia Demographic and Health Survey to analyze factors associated with early initiation of breastfeeding, exclusive breastfeeding (EBF), and continued breastfeeding at 1 year (CBF-1) and 2 years (CBF-2). Multivariate logistic regression models were used to examine bio-demographic, socio-cultural, and behavioral characteristics associated with breastfeeding after considering the survey design effect. Results: The risk of delayed breastfeeding initiation was higher among infants who were born smaller, first-born children, were delivered via cesarean delivery, and did not have immediate skin-to-skin contact (p<0.01). Infant's age, birth pattern, household wealth index, and the mother's occupation and smoking status were predictors of EBF (p<0.05). CBF-1 was less common among first-time mothers and those working in the non-agricultural sector, mothers from wealthier families, and mothers who had cesarean deliveries (p<0.01). Infant's age was negatively associated with CBF-2 (adjusted odds ratio [aOR], 0.85; 95% confidence interval [CI], 0.74 to 0.99). Mothers attending college were less likely to practice CBF-2 than those with no education or primary education (aOR, 0.45; 95% CI, 0.26 to 0.77). The absence of postnatal visits was a risk factor for CBF-1 and CBF-2 (p<0.05). Conclusions: Breastfeeding interventions in Indonesia should pay particular attention to at-risk groups such as women from wealthier families, working outside the agricultural sector, and with a higher education level. Nutrition-sensitive programs (e.g., postnatal care and smoking cessation) should also be encouraged.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6D
• /
• pp.895-904
• /
• 2008

CWR (Continuous Welded Rail) may be broken when a temperature drop below the neutral temperature changes in axial force, causing tensile fracture and rail gap, in winter. Rail-breaks may lead to the damage of the rail and wheel by dynamic load, and the reduction of running safety if not detected before the passage of a train. In this study, the track and train coupled model with open gap for dynamic interaction analysis, is proposed. Linear track and train systems is coupled by the nonlinear Herzian contact spring and the complete system matrices of total track-train system is constructed. And the interaction phenomenon considering open gap, was defined by assigning the irregularity functions between the two sides of a gap. Time history analysis, which have an iteration scheme such as $Newmark-{\beta}$ method based on Modified Newton-Raphson methods, was performed to solve the nonlinear equation. Finally, numerical studies are performed to assess the effect of various parameters of system, apply to various speeds, open gap size and the support stiffness of rail.